The bleeding edge with SVN3318 and a virgin Debian 8.0.0
-
So when did 8.0 release?
-
Bleeding edge I said … Debian 8.0.0 was released 3 days ago.
The more I see of the hodge podge of differences that Ubuntu has mashed in deviating from the norm, the more I felt I should give Debian a shot.
I know how much you want me off Ubuntu
SVN3320 also fails. -
I expect everything to fail?
I don’t know what changes it brings and where it’s failing.
-
I’ll even bet the particular failure is indirectly related to the use of systemd vs. service <servicename>.
-
Is there any new idea about fog on debian 8?
I think there are a lot of people out there that would like to run latest fog on latest debian…Greeds and thanks for all the great work!
-
If anybody is daring/willing, and I’m sure it won’t work the first time around, can you please try the latest SVN? I am attempting, blindly as it may be, to use systemd methods as appropriate for Ubuntu 15/Debian 8.
-
For both Debain 8.0.0 & Ubuntu 15.04 with SVN 3502
Installation Started... Installing required packages, if this fails make sure you have an active internet connection. ./.install.sh: line 260: installPackages: command not found Confirming package installation. ./.install.sh: line 264: confirmPackageInstallation: command not found Configuring services. What is the storage location for your images directory? (/images) ^C -
I think I might just setup a Debian box in my house and just let Tom use it lol.
-
There was a typo that had the line
fiAt line 632 that had a numeric 5 appended to the end of it.
It is currently corrected for.
-
SVN 3504 on Debian 8.0.0
It looks like this forum’s editor doesn’t like square brackets. I replaced all instances with ordinary parentheses to make it work. On the bright side, I can paste the entire log without running into a character limit.
Checked out revision 3504. ..#######:. ..,#,.. .::##::. .:###### .:;####:......;#;.. ...##... ...##;,;##::::.##... ,# ...##.....##:::## ..:: ## .::###,,##. . ##.::#.:######::. ...##:::###::....#. .. .#...#. #...#:::. ..:####:.. ..##......##::## .. # # . ...##:,;##;:::#: ... ##.. .# . .:;####;::::.##:::;#:.. # ..:;###.. ########################################### # FOG # # Free Computer Imaging Solution # # # # http://www.fogproject.org/ # # # # Credits: # # http://fogproject.org/Credits # # GNU GPL Version 3 # ########################################### Version: 1.3.0 Installer/Updater What version of Linux would you like to run the installation for? 1) Redhat Based Linux (Redhat, CentOS, Mageia) 2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu) 3) Arch Linux Choice: (2)2 Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion. FOG Server installation modes: * Normal Server: (Choice N) This is the typical installation type and will install all FOG components for you on this machine. Pick this option if you are unsure what to pick. * Storage Node: (Choice S) This install mode will only install the software required to make this server act as a node in a storage group More information: http://www.fogproject.org/wiki/index.php?title=InstallationModes What type of installation would you like to do? (N) n What is the IP address to be used by this FOG Server? (172.19.244.22) Would you like to setup a router address for the DHCP server? (Y/n) n Would you like to setup a DNS address for the DHCP server and client boot image? (Y/n) n Would you like to change the default network interface from eth0? If you are not sure, select No. (y/N)n Would you like to use the FOG server for DHCP service? (y/N) n This version of FOG has internationalization support, would you like to install the additional language packs? (y/N) n Would you like to donate computer resources to the FOG Project to mine cryptocurrency? This will only take place during active tasks and should NOT have any impact on performance of your imaging or other tasks. The currency will be used to pay for FOG Project expenses and to support the core developers working on the project. For more information see: http://fogproject.org/?q=cryptocurrency Would you like to donate computer resources to the FOG Project? (y/N) n ##################################################################### FOG now has everything it needs to setup your server, but please understand that this script will overwrite any setting you may have setup for services like DHCP, apache, pxe, tftp, and NFS. It is not recommended that you install this on a production system as this script modifies many of your system settings. This script should be run by the root user on Redhat or with sudo on Ubuntu. ** Notice ** Redhat users will need to disable SELinux and iptables in order to use FOG Please see our wiki for more information at http://www.fogproject.org/wiki Here are the settings FOG will use: Base Linux: Debian Detected Linux Distribution: Debian Installation Type: Normal Server Server IP Address: 172.19.244.22 DHCP router Address: DHCP DNS Address: Interface: eth0 Using FOG DHCP: 0 Internationalization: 0 Image Storage Location: MySQL Connection Type: Donate: 0 DHCP will NOT be setup but you must setup your current DHCP server to use FOG for PXE services. On a Linux DHCP server you must set: next-server On a Windows DHCP server you must set: option 066 & 067 Option 066 is the IP of the FOG Server: (e.g. 172.19.244.22) Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe) Are you sure you wish to continue (Y/N) y Installation Started... Installing required packages, if this fails make sure you have an active internet connection. * Preparing apt-get * Packages to be installed: apache2 php5 php5-json php5-gd php5-cli php5-curl mysql-server mysql-client tftpd-hpa tftp-hpa nfs-kernel-server vsftpd net-tools wget xinetd sysv-rc-conf tar gzip build-essential cpp gcc g++ m4 htmldoc lftp openssh-server php-gettext php5-mcrypt php5-mysqlnd curl libc6 libcurl3 zlib1g * Installing package: apache2 * Installing package: php5 * Skipping package: php5-json (Already installed) * Installing package: php5-gd * Skipping package: php5-cli (Already installed) * Installing package: php5-curl * Installing package: mysql-server We are about to install MySQL Server on this server, if MySQL isn't installed already you will be prompted for a root password. Press enter to acknowledge this message. Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libdbd-mysql-perl libdbi-perl libhtml-template-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-common mysql-server-5.5 mysql-server-core-5.5 Suggested packages: libclone-perl libmldbm-perl libnet-daemon-perl libsql-statement-perl libipc-sharedcache-perl tinyca The following NEW packages will be installed: libdbd-mysql-perl libdbi-perl libhtml-template-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded. Need to get 8,588 kB of archives. After this operation, 95.7 MB of additional disk space will be used. Get:1 http://security.debian.org/ jessie/updates/main mysql-common all 5.5.43-0+deb8u1 (74.2 kB) Get:2 http://ftp3.nrc.ca/debian/ jessie/main libdbi-perl amd64 1.631-3+b1 (816 kB) Get:3 http://ftp3.nrc.ca/debian/ jessie/main libdbd-mysql-perl amd64 4.028-2+b1 (119 kB) Get:4 http://ftp3.nrc.ca/debian/ jessie/main libterm-readkey-perl amd64 2.32-1+b1 (28.0 kB) Get:5 http://ftp3.nrc.ca/debian/ jessie/main libhtml-template-perl all 2.95-1 (66.8 kB) Get:6 http://security.debian.org/ jessie/updates/main libmysqlclient18 amd64 5.5.43-0+deb8u1 (663 kB) Get:7 http://security.debian.org/ jessie/updates/main mysql-client-5.5 amd64 5.5.43-0+deb8u1 (1,653 kB) Get:8 http://security.debian.org/ jessie/updates/main mysql-server-core-5.5 amd64 5.5.43-0+deb8u1 (3,333 kB) Get:9 http://security.debian.org/ jessie/updates/main mysql-server-5.5 amd64 5.5.43-0+deb8u1 (1,762 kB) Get:10 http://security.debian.org/ jessie/updates/main mysql-server all 5.5.43-0+deb8u1 (72.5 kB) Preconfiguring packages ... Fetched 8,588 kB in 5s (1,653 kB/s) Selecting previously unselected package mysql-common. (Reading database ... 34889 files and directories currently installed.) Preparing to unpack .../mysql-common_5.5.43-0+deb8u1_all.deb ... Unpacking mysql-common (5.5.43-0+deb8u1) ... Selecting previously unselected package libmysqlclient18:amd64. Preparing to unpack .../libmysqlclient18_5.5.43-0+deb8u1_amd64.deb ... Unpacking libmysqlclient18:amd64 (5.5.43-0+deb8u1) ... Selecting previously unselected package libdbi-perl. Preparing to unpack .../libdbi-perl_1.631-3+b1_amd64.deb ... Unpacking libdbi-perl (1.631-3+b1) ... Selecting previously unselected package libdbd-mysql-perl. Preparing to unpack .../libdbd-mysql-perl_4.028-2+b1_amd64.deb ... Unpacking libdbd-mysql-perl (4.028-2+b1) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../libterm-readkey-perl_2.32-1+b1_amd64.deb ... Unpacking libterm-readkey-perl (2.32-1+b1) ... Selecting previously unselected package mysql-client-5.5. Preparing to unpack .../mysql-client-5.5_5.5.43-0+deb8u1_amd64.deb ... Unpacking mysql-client-5.5 (5.5.43-0+deb8u1) ... Selecting previously unselected package mysql-server-core-5.5. Preparing to unpack .../mysql-server-core-5.5_5.5.43-0+deb8u1_amd64.deb ... Unpacking mysql-server-core-5.5 (5.5.43-0+deb8u1) ... Processing triggers for man-db (2.7.0.2-5) ... Setting up mysql-common (5.5.43-0+deb8u1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 35249 files and directories currently installed.) Preparing to unpack .../mysql-server-5.5_5.5.43-0+deb8u1_amd64.deb ... Unpacking mysql-server-5.5 (5.5.43-0+deb8u1) ... Selecting previously unselected package libhtml-template-perl. Preparing to unpack .../libhtml-template-perl_2.95-1_all.deb ... Unpacking libhtml-template-perl (2.95-1) ... Selecting previously unselected package mysql-server. Preparing to unpack .../mysql-server_5.5.43-0+deb8u1_all.deb ... Unpacking mysql-server (5.5.43-0+deb8u1) ... Processing triggers for systemd (215-17) ... Processing triggers for man-db (2.7.0.2-5) ... Setting up libmysqlclient18:amd64 (5.5.43-0+deb8u1) ... Setting up libdbi-perl (1.631-3+b1) ... Setting up libdbd-mysql-perl (4.028-2+b1) ... Setting up libterm-readkey-perl (2.32-1+b1) ... Setting up mysql-client-5.5 (5.5.43-0+deb8u1) ... Setting up mysql-server-core-5.5 (5.5.43-0+deb8u1) ... Setting up mysql-server-5.5 (5.5.43-0+deb8u1) ... 150602 9:35:26 (Warning) Using unique option prefix key_buffer instead of key_buffer_size is deprecated and will be removed in a future release. Please use the full name instead. 150602 9:35:26 (Note) /usr/sbin/mysqld (mysqld 5.5.43-0+deb8u1) starting as process 5586 ... Setting up libhtml-template-perl (2.95-1) ... Setting up mysql-server (5.5.43-0+deb8u1) ... Processing triggers for libc-bin (2.19-18) ... Processing triggers for systemd (215-17) ... * Installing package: mysql-client * Installing package: tftpd-hpa * Installing package: tftp-hpa * Installing package: nfs-kernel-server * Installing package: vsftpd * Skipping package: net-tools (Already installed) * Skipping package: wget (Already installed) * Installing package: xinetd * Installing package: sysv-rc-conf * Skipping package: tar (Already installed) * Skipping package: gzip (Already installed) * Installing package: build-essential * Skipping package: cpp (Already installed) * Skipping package: gcc (Already installed) * Skipping package: g++ (Already installed) * Skipping package: m4 (Already installed) * Installing package: htmldoc * Installing package: lftp * Skipping package: openssh-server (Already installed) * Installing package: php-gettext * Installing package: php5-mcrypt * Installing package: php5-mysqlnd * Installing package: curl * Skipping package: libc6 (Already installed) * Skipping package: libcurl3 (Already installed) * Skipping package: zlib1g (Already installed) Confirming package installation. * Checking package: apache2...OK * Checking package: php5...OK * Checking package: php5-json...OK * Checking package: php5-gd...OK * Checking package: php5-cli...OK * Checking package: php5-curl...OK * Checking package: mysql-server...OK * Checking package: mysql-client...OK * Checking package: tftpd-hpa...OK * Checking package: tftp-hpa...OK * Checking package: nfs-kernel-server...OK * Checking package: vsftpd...OK * Checking package: net-tools...OK * Checking package: wget...OK * Checking package: xinetd...OK * Checking package: sysv-rc-conf...OK * Checking package: tar...OK * Checking package: gzip...OK * Checking package: build-essential...OK * Checking package: cpp...OK * Checking package: gcc...OK * Checking package: g++...OK * Checking package: m4...OK * Checking package: htmldoc...OK * Checking package: lftp...OK * Checking package: openssh-server...OK * Checking package: php-gettext...OK * Checking package: php5-mcrypt...OK * Checking package: php5-mysqlnd...OK * Checking package: curl...OK * Checking package: libc6...OK * Checking package: libcurl3...OK * Checking package: zlib1g...OK Configuring services. What is the storage location for your images directory? (/images) What mysql connection type would you like? (MYSQLI_ASYNC) MYSQLI_STORE_RESULT is normal MYSQLI_ASYNC is what is Defaulted and recommended Any value not equal to MYSQLI_ASYNC and not blank will use store result * Setting up fog user...OK * Setting up and starting MySql...OK * Backing up user reports...OK * Did you leave the mysql password blank during install? (Y/n) n * Please enter your mysql password: * Please re-enter your mysql password: * Setting up and starting Apache Web Server...OK * Changing permissions on apache log files...OK * Downloading kernels and inits...OK * Downloading New FOG Client file...OK You still need to install/update your database schema. This can be done by opening a web browser and going to: http://172.19.244.22/fog/management Press (Enter) key when database is updated/installed. * Setting up storage...OK * Setting up and starting DHCP Server...Skipped * Setting up and starting TFTP and PXE Servers...OK * Setting up and starting VSFTP Server...OK * Setting up sudo settings...OK * Setting up FOG Snapins...OK * Setting up and building UDPCast...OK * Installing init scripts...OK * Setting up FOG Services...OK * Setting up FOG Utils...OK * Starting FOG Multicast Management Server...OK * Starting FOG Image Replicator Server...OK * Starting FOG Task Scheduler Server...OK * Starting FOG Snapin Replicator Server...OK * Setting up and starting NFS Server...OK * Linking /opt/fog/log to /var/log/fog...OK * Linking /opt/fog/service/etc to /etc/fog...OK * Creating SSL CA...OK * Creating SSL Private Key...OK * Creating SSL Certificate...OK * Creating auth pub key and cert...OK * Resetting SSL Permissions...OK * Setting up SSL FOG Server...OK Setup complete! You can now login to the FOG Management Portal using the information listed below. The login information is only if this is the first install. This can be done by opening a web browser and going to: http://172.19.244.22/fog/management Default User: Username: fog Password: password root@debian:/opt/trunk/bin#So far so good.
-
@sudburr It’s seem to be ok on the log, it’s working ?
-
I’ll let ya know shortly. I’m reproducing and documenting the entire process, including for Debian 8.0.0.
-
Basically,
- Exported my Fog Configuration settings from my existing development fog (svn 3477) on Ubuntu 14.04.2
- shutdown the vm
- attached existing development .vhdx image drives to new Debian 8.0.0 svn 3504 based Hyper-V 2012 R2 virtual machine.
- Fired that mother up
- ran my changename and fog mobilization scripts
- updated the IP address for the two storage nodes (default, other) pointing to the two .vhdx purpose drives ( mounted as /images and /other )
- imported the saved configuration and then the verified usernames/passwords for tftp, management, unix etc.
- Doing a quick image as I type this. booyah
Also tested:
de-registration
quick registration
Task deploy (download) -
Is it safe to “solve” the thread though?
-
I’m happy enough to leave it as my development fog.
I did not notice any hiccups or gotchas during installation or import.
So yes, I think this is solved.
Thx for all of your hard work getting FOG up to speed for us bleeding edge types.
-
With SVN 3540 on Debian 8.1 I still have the following installation-error:
Starting FOG Multicast Management Server...Failed!Greeds and Thanks!
-
@tomtom did you actually go and update the database? If the database is not prepared before the services start or stop you will see this error.
-
Hi Tom,
i updatet the database before.
After debian-restart, i checked status of- /etc/init.d/FOGMulticastManager
- /etc/init.d/FOGScheduler
- /etc/init.d/FOGImageReplicator
They are alle running!
BUT: now i’m getting error when trying to perform full host registration and inventory:
-
The problem with the service start error seems to be that $linuxReleaseName in .install.sh evaluates to “Debian GNU/Linux”, not “Debian” as the scripts expect. After setting $linuxReleaseName manually in .install.sh, everything worked fine for me.
