Dell 7010 Lenovo L530 with UEFI enabled, won't network boot.

[Sebastian Roth]

[quote=“Wayne Workman, post: 45463, member: 28155”]Just sits at “iPXE initialising devices…”[/quote]

Any DEBUG output you see before this???

[Wayne Workman]

[quote=“Uncle Frank, post: 45480, member: 28116”]Any DEBUG output you see before this???[/quote]

None at all. It gets IP configuration from DHCP, shows that very briefly, and then sits at the “iPXE initializing devices…”

I’m going to do some surfing tonight for other bootfiles for UEFI.

Would any work? They need to be 64 bit, probably? As I understand it, the boot file simply places drivers to get the network interface working right (and maybe other stuff?) and then calls a kernel to begin execution?

[Wayne Workman]

How can I add the Linux drivers into ipxe.efi that are listed here: [url]http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false[/url]

??

[Tom Elliott]

Unfortunately you can’t.

[Wayne Workman]

Well this blows…

I don’t know what to do.

I was attempting this endeavor simply so I could work on DHCP classes for Server 2012…
I suppose I need to find a device that actually works with ipxe.efi to do this.

[Wayne Workman]

r3255 - still same problem.

[Sebastian Roth]

I guess I’d need to get my hands on this myself. It just takes too long back and forth debugging this. I’ll see what EFI devices we have at work and will give it a go!

[Wayne Workman]

[quote=“Joseph Hales, post: 45714, member: 18131”]All working systems UEFI disabled single partition realizable.
Fog 1.3.0 SVN 3263 all systems using the base NIC on the motherboard, and default kernel.
[B]Dell Optiplex 7010[/B]
[/quote]

Maybe Mr. Hales could give it a shot, too?
[FONT=Tahoma][COLOR=#141414] [/COLOR][/FONT]
[FONT=Tahoma][COLOR=#141414] [/COLOR][/FONT]
[FONT=Tahoma][COLOR=#141414] [/COLOR][/FONT]
[FONT=Tahoma][COLOR=#141414] [/COLOR][/FONT]

[Joseph Hales]

I was under the impression that to run UEFI as netboot I would need my dhcp server to be server 2013 or higher which I don’t have in my current environment.

[Wayne Workman]

Nah.

Just change your boot file to ipxe.efi or snp.efi or snponly.efi

[Joseph Hales]

If I can find one not in production I will give it a shot on my test network.

[Wayne Workman]

Just bumping this thread with an update about the OP, I just tried the L530 in UEFI network booting mode with svn 4323 cloud 5293 and no luck. I do know I have ISC-DHCP configured correctly, the correct filename ipxe.efi is handed out, and the last time I checked the file transfer did happen.

I’ll try to UEFI network boot a Optiplex 7010 tomorrow and see what happens… fingers crossed.

[Psycholiquid]

I have OP 7010s here also I’ll try and see what I get and update.

[Wayne Workman]

I just got done trying the Dell 7010 with intel.efi ipxe.efi realtek.efi snp.efi and snponly.efi… no luck.

[Sebastian Roth]

no luck??? Could you please be a bit more specific. See any errors? Just reboots or hangs? Screenshot?

[Wayne Workman]

@Sebastian-Roth It just hangs at initialising devices.

[Sebastian Roth]

@Wayne-Workman Please give this binary a try: ipxe.efi

compiled with DEBUG=device,pci… please upload pictures for me to see where it hangs.

[Wayne Workman]

@Sebastian-Roth It hangs here.

[Sebastian Roth]

great! so this is the next step: ipxe.efi

compiled with: DEBUG=device,efi_bofm,efi_debug,efi_driver,efi_init,efi_pci,efi_pxe,efi_snp

[Wayne Workman]

@Sebastian-Roth Here is a link to a video and two pictures as well.
https://youtu.be/xS_XJk8EXDg
https://drive.google.com/open?id=0B2BmriqzYEgXWFBKVGpwWE43ZVE

It appears that the same errors repeat continually for about 3 to 4 minutes until the machine just reboots.