Surface Pro 3 PXE:

Matt Edwards · Mar 3, 2015, 3:08 PM

We are running FOG Version 1.2.0 on Ubuntu 12:10

Thanks

Matt

Tom Elliott · Mar 3, 2015, 3:25 PM

okay, Matt, can you attempt upgrading to SVN? The command line you’re missing (causing your boot problem) is initrd=init.xz. This is corrected for in SVN, though I am aware of some issues potentially with the init and am working hard to try correcting them.

Matt Edwards · Mar 3, 2015, 4:57 PM

I’m really sorry Tom, are you able to guide me to what I should be doing exactly to achieve what you say. I’m not too familiar with the background workings of Linux.

Thanks

Matt

Wolfbane8653 · Mar 3, 2015, 9:47 PM

[url]http://fogproject.org/wiki/index.php/Upgrade_to_trunk[/url]

d4rk3 · Mar 4, 2015, 8:54 PM

Do this:

[SIZE=13px][INDENT]Go here:

[URL=‘https://rom-o-matic.eu/’]https://rom-o-matic.eu[/URL]

Advanced - EFI PXE Bootstrap 32-bit

Check these boxes:

[URL=‘http://www.ipxe.org/buildcfg/PARAM_CMD’][FONT=Arial][COLOR=#000000]PARAM_CMD[/COLOR][/FONT][/URL][FONT=Arial][COLOR=#000000], Form parameter commands [/COLOR][/FONT]
[URL=‘http://www.ipxe.org/buildcfg/CONSOLE_CMD’][FONT=Arial][COLOR=#000000]CONSOLE_CMD[/COLOR][/FONT][/URL][FONT=Arial][COLOR=#000000], Console command [/COLOR][/FONT]
[URL=‘http://www.ipxe.org/buildcfg/CPUID_SETTINGS’][FONT=Arial][COLOR=#000000]CPUID_SETTINGS[/COLOR][/FONT][/URL][FONT=Arial][COLOR=#000000], CPUID settings[/COLOR][/FONT]

And paste this script in the script box (Replace x.x.x.x with your FOG server’s IP or hostname):

#!ipxe

dhcp
cpuid --ext 29 && set arch i386 ||
params
param mac0 ${net0/mac}
param arch ${arch}
param product ${product}
param manufacturer ${product}
param ipxever ${version}
param filename ${filename}
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:bootme
chain [url]http://x.x.x.x/fog/service/ipxe/boot.php##params[/url]

Click Proceed, and voila! Copy the new EFI bootfile to your /tftpboot folder and give it a whirl![/INDENT][/SIZE]
[SIZE=11px] [/SIZE]

Matt Edwards · Mar 5, 2015, 3:19 PM

Thanks - I’ll give this another shot - but I tried this a few days back after reading your earlier post and couldn’t get it to work!

d4rk3 · Mar 5, 2015, 7:07 PM

I’m hoping that once you make a 32-bit bootfile that it’ll work. Unless you already have…

Matt Edwards · Mar 6, 2015, 9:36 AM

Morning,

I’ve tried again using the modified ipxe.efi file created from the website - When I set that as the bootfile and boot up the Surface Pro 3 I get…

Checking Media Presence…
Media Present…
Start PXE over IPv4

It flicks then to saying

Downloading NBP file… (this appears for a second or two)

Then moves onto

Checking Media Presence…
Media Present…
Start PXE over IPv6

Before continuing to boot up the Surface Pro 3.

I don’t get any Fog Menu

Thanks

Matt

d4rk3 · Mar 6, 2015, 2:19 PM

Try making a 32-bit EFI bootfile with a script that only has these contents:

#!ipxe

dhcp
shell

If that doesn’t work either, make a 64-bit one with the same script.

One of those should bring you to an iPXE shell.

Matt Edwards · Mar 8, 2015, 12:46 PM

Thanks - will try this tomorrow when I’m back in work.

If I manage to get it working, will this then boot up the fog menu or will I need to enter some command in the iPXE shell to load fog? If so, what will I need to enter?

Thanks

Matt

Sebastian Roth · Mar 8, 2015, 6:49 PM

You’ll end up in an iPXE shell…
dhcp, ifstat, ipstat and ping will be helpful to debug you network connection. When it is up you can just chainload default.ipxe (chain tftp://<tftp-ip>/default.ipxe) OR run all the commands by hand (see d4rk3’s earlier post #45).

d4rk3 · Mar 9, 2015, 3:46 AM

Correct. Once we get you to a shell we can go from there.

On that note, once you are able to boot to an iPXE shell make a note of the architecture of the EFI bootfile. Go back to [url]https://rom-o-matic.eu[/url] and re-compile an EFI bootfile with the correct architecture for your Surfaces.

Keep us posted.

Matt Edwards · Mar 9, 2015, 2:18 PM

I’ve tried doing this…

I first tried with the 32 bit and it flashed up saying downloading NBP File very quickly then moved onto IPv6 before continuing to load up Windows…

I then tried using the 64 bit version, again it came up with Downloading NBP file and appeared to be doing a little more then the 32 bit version, but then it continued to load up Windows!!

What else can I try??!?!?

Thanks

Matt

d4rk3 · Mar 10, 2015, 1:17 PM

Ok, I just re-read this thread and I missed your earlier message:

“I then tried the snp.efi which booted to a very basic looking menu”

The snp.efi is what you’ll want to use for these.

Now, we just need to find a good kernel for these to boot with and you should be all set.

d4rk3 · Mar 10, 2015, 1:27 PM

Ok. I just re-read it again and Tom is correct, you’ll need to upgrade to the latest SVN for these to work.

[CODE]apt-get install subversion
svn co https://svn.code.sf.net/p/freeghost/code/trunk/ /opt/trunk
cd /opt/trunk/bin
./installfog.sh[/CODE]

Once upgraded use the snp.efi bootfile and see if you’re able to register the Surface with FOG.

A Former User · Sep 22, 2015, 2:17 PM

I am experiencing a similar issue.

I was able to get a Surface Pro 3 to PXE boot and recognize my FOG server, but when I attempted to either Quick Host Register or Full Host Register, I received the following error:

“Error ident-mapping new memmap (ox13ac72000)!
i8042: No controller found”

Then, at the usual FOG registration screen, it says:
“An error has been detected!
Cannot find HDD on system”

I tested using a USB keyboard instead of the Surface keyboard, and made sure that the server could still register and deploy images to other computers.

I also tried snp.efi and ipxe.efi with no luck. FOG 1.2 and my trunk is up-to-date as of yesterday (9/22/15) and the FOG server has been restarted.

Any ideas out there?

Sebastian Roth · Sep 22, 2015, 3:16 PM

There are several other threads about Surface Pro 3 in the forums (https://www.google.com/?gws_rd=ssl#q=site:fogproject.org+surface) but non of them is talking about HDD problems I wonder.

AFAIK there is a SSD drive in the Surface Pro 3, right? Please add the device as a new host with it’s MAC address by hand in the webinterface. Then boot it up in a debug session (Host -> Basic Tasks -> Debug) and issue the following command:

dmesg | grep sd

What do you see?

A Former User · Sep 22, 2015, 4:28 PM

Thanks Uncle Frank . Please see the attached image of what I saw after entering the debug command.

Sebastian Roth · Sep 22, 2015, 5:04 PM

What about this:

dmesg | grep ATA

Sorry, this is just guessing in the dark so far. Probably best if you could upload the whole output so we can have a look. Again, boot into debug mode and then:

mkdir -p /mnt
mount -o nolock <your-fog-server-ip>:/images/dev /mnt
dmesg > /mnt/dmesg.txt
umount /mnt

Edit: Just for the records, here is what dmesg on a Surface Pro 3 might look like: https://gist.github.com/altercation/30776be1078eac2b0cc6

A Former User · Sep 22, 2015, 6:01 PM

Here’s what I got:

tech@fog14VM:/images/dev$ less dmesg.txt
[ 0.000000] Linux version 4.2.0 (root@debian64) (gcc version 4.9.2 (Debian 4.9.2-10) ) #8 SMP Thu Sep 17 09:02:24 EDT 2015
[ 0.000000] Command line: bzImage loglevel=4 initrd=init.xz root=/dev/ram0 rw ramdisk_size=127000 keymap= web=10.2.16.9/fog/ consoleblank=0 mac=c0:33:5e:73:cf:a2 ftp=10.2.16.9 storage= storageip= web=10.2.16.9/fog/ osid= consoleblank=0 irqpoll hostname=MIC-SURFACE-02 mode=onlydebug
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using ‘lazy’ FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000ba96efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba96f000-0x00000000bac6efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bac6f000-0x00000000bad6efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bad6f000-0x00000000bb3bffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb3c0000-0x00000000bbaccfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbacd000-0x00000000bbad0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bbad1000-0x00000000bbad1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbad2000-0x00000000bbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

Surface Pro 3 PXE:

191

12.0k

17.3k

155.2k