Problem with dhcp options configuration

Tom Elliott

[quote=“Leandro Silva, post: 29351, member: 24513”]Hello i instaled the fog version 1.0.1 yesterday and tried to configure it with my existing mikrotik dhcp server.

The fog is on the same netowork as my host machines, in the dhcp server i created the 66 and 67 options as follows:

Name Code Value
next-server 66 172.16.8.2
bootfile 67 pxelinux.0

but my host machines give me a message that no configuration are recieved from dhcp, is there any other option that i have to create?
When i installed fog i choose no when it prompt for it to be the dhcp server.[/quote]

When you performed the install, did you pay attention to the output being displayed to you?

Leandro Silva

I already tried: undionly.kpxe and have the same problem

here follows my instalation process

  ..#######:.    ..,#,..     .::##::.

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

[url]http://www.fogproject.org/[/url]

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

###########################################

Version: 1.0.1 Installer/Updater

What version of Linux would you like to run the installation for?

      1) Redhat Based Linux (Redhat, CentOS)
      2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu)

Choice: [2]

Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.

  * Storage Node: (Choice S)
      This install mode will only install the software required
      to make this server act as a node in a storage group

More information:
[url]http://www.fogproject.org/wiki/index.php?title=InstallationModes[/url]

What type of installation would you like to do? [N]

What is the IP address to be used by this FOG Server? [end.:]172.16.8.2

Would you like to setup a router address for the DHCP server? [Y/n] 172.16.8.1
Invalid input, please try again.

Would you like to setup a router address for the DHCP server? [Y/n] y
What is the IP address to be used for the router on the DHCP server? []172.16. 8.1

Would you like to setup a DNS address for the DHCP server and client boot imag e? [Y/n] y
What is the IP address to be used for DNS on the DHCP server and client boot i mage? [172.16.0.106]

Would you like to change the default network interface from eth0?
If you are not sure, select No. [y/N]y
What network interface would you like to use? p4p1

Would you like to use the FOG server for DHCP service? [Y/n] n

This version of FOG has internationalization support, would
you like to install the additional language packs? [y/N] n

Would you like to donate computer resources to the FOG Project
to mine cryptocurrency? This will only take place during active
tasks and should NOT have any impact on performance of your
imaging or other tasks. The currency will be used to pay for
FOG Project expenses and to support the core developers working
on the project. For more information see:

[url]http://fogproject.org/?q=cryptocurrency[/url]

Would you like to donate computer resources to the FOG Project? [y/N] n

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Redhat or with sudo on Ubuntu.

** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 172.16.8.2
DHCP router Address: 172.16.8.1
DHCP DNS Address: 172.16.0.106
Interface: p4p1
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

     DHCP will NOT be setup but you must setup your
     current DHCP server to use FOG for PXE services.

     On a Linux DHCP server you must set:
         next-server

     On a Windows DHCP server you must set:
         option 066 & 067

               Option 066 is the IP of the FOG Server: (e.g.
               Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

Are you sure you wish to continue (Y/N) y

Wolfbane8653

Can you upload a picture of your exact error message?

Leandro Silva

[IMG]http://en.community.dell.com/cfs-file.ashx/__key/communityserver-discussions-components-files/956/bios_2D00_mode_2D00_pxe_2D00_boot_2D00_fails.png[/IMG]

VincentJ

it’s complaining it can’t get an IP address.

what is your DHCP server running on?

I’ve had this a small amount at my current place of work, but it is only laptops plugged in via their Ethernet ports…

Jaymes Driver

Is this a type-o or did you really enter your ip address as 172.16. 8.1 because there is a space in there.

Leandro Silva

i’m using a mikrotik as router and dhcp server for this network segment and my fog server and host machines are geting dhcp from it.

Leandro Silva

[quote=“Jaymes Driver, post: 29423, member: 3582”]Is this a type-o or did you really enter your ip address as 172.16. 8.1 because there is a space in there.[/quote]

It was entered correctly in the configuration the space appered when i copied it in the terminal

Jaymes Driver

[quote=“Leandro Silva, post: 29427, member: 24513”]i’m using a mikrotik as router and dhcp server for this network segment and my fog server and host machines are geting dhcp from it.[/quote]

Another possibility is to install the dnsmasq service to help alleviate the issues of trying resolve your dhcp information.

[url]http://fogproject.org/wiki/index.php/Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server#DNSMASQ_settings_for_iPXE[/url]

Leandro Silva

Now something came to my mind, i’m using supernetting in this network, my network is 172.16.8.0/21, the pxe protocol supports supernetting?

Leandro Silva

sorry subnetting, bad english

VincentJ

I use a 10.x.x.x with 255.255.248.0 subnet mask, works fine for me.

Leandro Silva

Helo i solved my problem following this awesome tutorial:

[url]http://fogproject.org/forum/threads/how-to-setup-ubuntu-server-fog-1-2-0-create-univeral-windows-7-image-using-sysprep-step-by-step.11245/[/url]

I had many problems becouse of i tried to use ubuntu 14.04 now i’m using ubuntu 10.04 and it is working well.

I had problems configuring my mikrotik dhcp server, becouse i was trying to configure the options 66 and 67 manualy, there are specifc filds in it to configure these options, in the picture below i show the right filds:

[IMG]https://dl.dropboxusercontent.com/u/70915108/dhcp_fog_mikrotik.jpg[/IMG]

Vlad.R

Hello .

This setting works IF you disable "Allways Broadcast " in DHCP setings .
Thank for sharing . It helped me a lot.