Latest FOG 1.0.0
-
[quote=“falko, post: 26949, member: 48”]you mean adding an ISO to the Boot menu?[/quote]
Yes, because I don’t understand how to do that with the new PXE -
Thanks!!!
-
this is a good place to start for your options with the Advanced Boot menu options
[url]http://fogproject.org/forum/threads/fog-0-33b-edit-pxe-menu.10403/#post-26419[/url] -
did the install to 1.0.0 now when I try to install/update the database schema, i got you my web gui url and it just says unable to connect to database.
-
did you update your password in fog/commons/config.php after the install?
-
I did not…am I suppose to update it to the username and password it gave me as default user or as my password?
-
nevermind, I got it. My password was missing from database_password. Thanks for letting me know where to look though. Still learning as I go…
-
So… are we still using svn for udpates?
-
you can, if you want to be on “the bleeding” edge. Right now it’s the exact same as the release.
-
Ok. I like the bleeding edge!
I was just unsure if the “fog_0.33b” folder in subversion was going to change.
-
there was never a fog_0.33b folder. You create the name.
[code]svn co https://svn.code.sf.net/p/freeghost/code/trunk /opt/fog_0.33b[/code]If you want the name changed you would just mv the folder to the new name.
or recheckout and change the folder name:
[code]svn co https://svn.code.sf.net/p/freeghost/code/trunk /opt/fog_1.0.0[/code] -
just remember that if you use “bleeding edge” svn after this point, it may contain unstable code. tested code will be made available in numbered releases
-
Hello all,
I hope I am in the correct Forum for this question. I have been searching for a couple of days now.
I am sure I am doing something wrong. I am trying to add options to the iPXE Advanced menu.
I have read through [url]http://fogproject.org/forum/threads/fog-0-33b-edit-pxe-menu.10403/#post-26419[/url] and tried the examples with no success. The following is what I am currently trying.OS: Ubuntu 14.04
FOG: 1.0.0 r1678PXE Boot Menu => Advanced Configuration Options:
Imenu ADVANCED MENU[/I]
Icolour --rgb 0xff0000 0[/I]
Icpair --foreground 0 3[/I]
Iitem --gap – -------------------------------------[/I]
Iitem konbootKon-Boot[/I]
COLOR=#ff0000goto ADV-MENU[/I][/COLOR]Ichain [url]http://${fog-ip}/${fog-webroot}/service/ipxe/iamges/kon-bootCD.iso[/url][/I]
If I remove the section in red, it returns to the Main menu (boot.php).
If I browse to the advanced.php page I get the following.
[url]http://${fog-ip}/fog/service/ipxe/advanced.php[/url]
I#!ipxe[/I]
Iconsole[/I]
Iset fog-ip 10.1.10.24[/I]
Iset fog-webroot fog[/I]
Icpair --foreground 7 --background 2 2[/I]
Iconsole --picture [url]http://${fog-ip}/${fog-webroot}/service/ipxe/bg.png[/url] --left 100 --right 80[/I]
I:ADV-MENU[/I]
Imenu ADVANCED MENU[/I]
Icolour --rgb 0xff0000 0[/I]
Icpair --foreground 0 3[/I]
Iitem --gap – -------------------------------------[/I]
Iitem konbootKon-Boot[/I]
Igoto ADV-MENU[/I]Ichain [url]http://${fog-ip}/${fog-webroot}/service/ipxe/iamges/kon-bootCD.iso[/url][/I]
Here is a shot of the screen after I try to go to the Advanced Menu.
[ATTACH=full]762[/ATTACH][url=“/_imported_xf_attachments/0/762_fog.jpg?:”]fog.jpg[/url]
-
try this
[CODE]
:ADV-MENU
menu
item --gap —ADVANCED MENU—
item konboot Kon-Boot
choose --default konboot --timeout 5000 target && goto ${target}:konboot
chain http://${fog-ip}/${fog-webroot}/service/ipxe/iamges/kon-bootCD.iso||
goto ADV-MENU
[/CODE] -
[quote=“Junkhacker, post: 26968, member: 21583”]this is a good place to start for your options with the Advanced Boot menu options
[url]http://fogproject.org/forum/threads/fog-0-33b-edit-pxe-menu.10403/#post-26419[/url][/quote]
Thanks! -
[quote=“Junkhacker, post: 27022, member: 21583”]try this
[CODE]
:ADV-MENU
menu
item --gap —ADVANCED MENU—
item konboot Kon-Boot
choose --default konboot --timeout 5000 target && goto ${target}:konboot
chain http://${fog-ip}/${fog-webroot}/service/ipxe/iamges/kon-bootCD.iso||
goto ADV-MENU
[/CODE][/quote]Junkhacker,
Thank you for the assist, but it did not resolve my issue. With your code, when I select Advanced Menu, the screen goes blank for about 2 seconds and then back to the main menu. -
[quote=“Eddy Weakley, post: 27131, member: 24131”]Junkhacker,
Thank you for the assist, but it did not resolve my issue. With your code, when I select Advanced Menu, the screen goes blank for about 2 seconds and then back to the main menu.[/quote]
maybe try this instead
[CODE]:ADV-MENU
menu
item --gap —ADVANCED MENU—
item konboot Kon-Boot
choose --default konboot --timeout 5000 target && goto ${target}:konboot
chain http://${fog-ip}/${fog-webroot}/service/ipxe/images/kon-bootCD.iso||
goto ADV-MENU[/CODE] -
I tested your code coded and it worked after I changed this line
[CODE]item --gap —ADVANCED MENU—[/CODE]
to that
[CODE]item --gap – -ADVANCED MENU—[/CODE] -
Just tried upgrading again, this time from 0.32 to 1.01. We Get an error on Database Schema Updater. Also when we try to list all hosts or all images returns a blank page. A search for a single host or image it returns data.
[ATTACH=full]771[/ATTACH]
[url=“/_imported_xf_attachments/0/771_fogerror.jpg?:”]fogerror.jpg[/url]
-
Thank you Junkhacker and Albatross.
I am now a step closer. I now get the Advanced Menu. When I select a menu item, it goes back to the Main menu.
I have not yet tinkered with this issue. I will see what I can figure out. I’m sure it’s a simple fix.
Thanks again for the help.