Can not find hard disk(s) (getHardDisk)

[Lementchow]

@Tom-Elliott Hi，below is the output.

[Tom Elliott]

@Lementchow We don’t see the beginning of the text, I’m assuming all of it shows “/dev/ram#” where # is anywhere from 0 - 15?

[Lementchow]

@Tom-Elliott Hi, I can’t use Page Up or Shift + Page Up to view anything before Ram5 in this page.

[Sebastian Roth]

@Lementchow I suggest you update your kernels to the latest available 6.1.x and try again: https://github.com/FOGProject/fos/releases/tag/20230331

[Lementchow]

@Sebastian-Roth The latest version of the kernel will be tried and feedback will be provided as progress is made. Thank you for your patient attention.

[Lementchow]

@Sebastian-Roth The problem still exists, and the hard disk is not found in debug mode.

[Lementchow]

Add lsblk and lspci -nn output.

[Tom Elliott]

@Lementchow This is going to sound absolutely crazy, but is there a hard drive on this machine?

I see the SATA and NVME controllers, but doesn’t look like anything is actually attached to them.

[Lementchow]

This post is deleted!

[Lementchow]

@Tom-Elliott I tried booting under windows PE and the hard drive could be found and correctly identified.

[Sebastian Roth]

@Lementchow So everything is working now as it should?

[Lementchow]

@Sebastian-Roth No, It’s still can not get harddisk, in fog deploy. Something strange.

[Sebastian Roth]

@Lementchow said in Can not find hard disk(s) (getHardDisk):

No, It’s still can not get harddisk, in fog deploy. Something strange.

Ahh, now I see. Somehow got the PE part wrong in your earlier posts.

Have you updated the FOS kernel as suggested? Please boot into a debug session and run uname -a to make sure it’s running the 6.x kernel.

[Lementchow]

@Sebastian-Roth Hi, Please see below.

[Lementchow]

@Sebastian-Roth Hi，Maybe you are very busy, I shouldn’t bother you unreasonably, but I really have no other way. I confirm that I have used the 6.1.X kernel now, but I still can’t deploy the system on the NVME hard drive, it seems not to see it, but if I plug in the USB hard drive, it can quickly complete the deployment.

[Sebastian Roth]

@Lementchow What NVMe drive is installed in this machine? Please post brand and model for us to check.

[Lementchow]

@Sebastian-Roth Good Morning. Hope you are doing well. Pls see the post of SSD brand and model.

[Sebastian Roth]

@Lementchow Thanks for the picture. Will take a look next week.

[Lementchow]

@Sebastian-Roth Thanks for you time to take this issue.

[Lementchow]

@Sebastian-Roth Thank you for your efforts. Is there any progress? I still stuck here