FOG 1.5.6: Auto resize is unpredictable

[Quazz]

I created a PR to fix some stuff and to hopefully handle errors better/more reliably.

I don’t think it will fix this problem necessarily, but it should should hopefully throw errors when we expect it to.

https://github.com/FOGProject/fos/pull/26

You can download the inits of it here: https://dev.fogproject.org/blue/organizations/jenkins/fos/detail/PR-26/2/artifacts

if you’re interested in testing it out.

[Quazz]

@Eric-Johnson Interesting. Could you add

cat /proc/sys/kernel/random/entropy_avail

before and after your output commands?

Just a wild hunch

If my hunch is correct, then I suspect you could replace your output commands with any other output commands and it would work. Alternatively, you could smash the keyboard a couple of times.

[Eric Johnson]

@Quazz That was a crazy brilliant idea!

I did the below, first cat before anything, then the processSfdisk to the screen then a second cat, then a pause so I can read it and it probably wasn’t important at that point (I think that would have shown the entropy increase, please let me know if I am miss-understanding what you wanted to see) but on two unicast tests so far… 2260 before / 2261 after (identical)

Going to do a multicast test to all 4 in a sec. See if there is any variation.

diff -u /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh /mnt/init/usr/share/fog/lib/partition-funcs.sh
--- /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh 2019-05-04 17:58:07.000000000 -0400
+++ /mnt/init/usr/share/fog/lib/partition-funcs.sh      2019-07-11 15:31:10.000000000 -0400
@@ -401,8 +401,19 @@
     #    majorDebugPause
     #fi
     #[[ $status -eq 0 ]] && applySfdiskPartitions "$disk" "$tmp_file1" "$tmp_file2"
+cat /proc/sys/kernel/random/entropy_avail
+    processSfdisk "$minf" filldisk "$disk" "$disk_size" "$fixed" "$orig" 
+echo "after"
+cat /proc/sys/kernel/random/entropy_avail
+
+        Pause #ESJ
     processSfdisk "$minf" filldisk "$disk" "$disk_size" "$fixed" "$orig" > "$tmp_file2"
     status=$?
+       echo $tmp_file2
+       ls -l $tmp_file2
+        cat $tmp_file2
+#        Pause ESJ
+
     if [[ $ismajordebug -gt 0 ]]; then
         echo "Debug"
         majorDebugEcho "Trying to fill with the disk with these partititions:"

[Eric Johnson]

@Quazz grrr. no luck. entropy started pretty high and was only slightly higher after the call to processSfdisk in 8 out of 8 cases… 2258-2261 before and after in all cases.

Was a great idea, worth trying though!

[Eric Johnson]

Current status:

Tried clever suggestion from @Quazz … it didn’t pan out.

But inspired me to think outside the box. Tried using /root/sfblahblah.$$ instead of /tmp (since tmpfs is different than ramdisk…) That was just as unsuccessful.

Just adding a “sync;sync;sync” (cause anything I tell you three times is true) seems successful. On two tests so far.

Maybe?

Current working diff…

[root@fog ipxe]# diff -u /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh /mnt/init/usr/share/fog/lib/partition-funcs.sh
--- /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh	2019-05-04 17:58:07.000000000 -0400
+++ /mnt/init/usr/share/fog/lib/partition-funcs.sh	2019-07-11 18:10:20.000000000 -0400
@@ -401,8 +401,17 @@
     #    majorDebugPause
     #fi
     #[[ $status -eq 0 ]] && applySfdiskPartitions "$disk" "$tmp_file1" "$tmp_file2"
+#    processSfdisk "$minf" filldisk "$disk" "$disk_size" "$fixed" "$orig" 
     processSfdisk "$minf" filldisk "$disk" "$disk_size" "$fixed" "$orig" > "$tmp_file2"
     status=$?
+sync;sync;sync
+#	echo $tmp_file2
+#	ls -l $tmp_file2
+#        cat $tmp_file2
+#echo "after"
+#cat /proc/sys/kernel/random/entropy_avail
+#Pause #ESJ
+	
     if [[ $ismajordebug -gt 0 ]]; then
         echo "Debug"
         majorDebugEcho "Trying to fill with the disk with these partititions:"
[root@fog ipxe]#

[Tom Elliott]

@Eric-Johnson what about replacing sync with sleep 5? Sync is just ensuring cached items in wait get pushed to disk, maybe the scripts are working just a slight bit too fast?

[Sebastian Roth]

@Tom-Elliott While you might be pointing to the right spot here I don’t thing adding a time based sleep is a great idea.

[Quazz]

@Eric-Johnson I mostly wanted to see it before and after your cat and ls commands and such, but I don’t think it matters, since 2000+ should be more than enough for just about anything anyway.

I was thinking that perhaps certain hardware wouldn’t generate enough entropy in time and that that would cause issues.

@Sebastian-Roth @Tom-Elliott Do you reckon it would be good idea to try and store the output in a variable as opposed to a file and use it as such?

[Sebastian Roth]

@Quazz While I am not against your idea of trying to move this from file to variable I really wonder why we see this issue right here lately. Did we always have this issue and people just didn’t report? I doubt that! Or is it a change we pushed out in the last weeks? I have gone through the commit and nothing really makes sense from my point of view.

I just try to take one step back before we head into trying to fix this. Is this hardware specific? @Eric-Johnson
Should we try a 1.5.5 or even 1.5.4 FOG server and see if it’s the same?!

[Quazz]

@Sebastian-Roth From what I gather, it’s an issue that isn’t happening under every circumstance (personally haven’t ran into it, having deployed to hundreds of devices over the course of each new init release), but does happen reliably under certain conditions.

It seems odd that a momentary delay in the script or otherwise a sync of the “disk” (as in the ramdisk) would prevent this issue from appearing again.

From what I can tell, people did start reporting such issues after a certain version, perhaps a buildroot update (Just looked and Buildroot version 2019.02 has bugfixes up to 2019.02.4 now! changes list: https://git.busybox.net/buildroot/plain/CHANGES?id=2019.02.4) ? People tend to wait a while before updating, so we may have to look a bit further back.

[Eric Johnson]

Bad news. On the 3rd deploy with sync;sync;sync one failed.

Good news:

I moved all the metering to AFTER the sfdisk (and didn’t send the sfdisk output to /dev/null as was suggested by @Sebastian-Roth ). Found something interesting. Twice on one of the 4 machines the sfdisk is failing with a disk in use error. The input is good, no issue with the tmp file. But sfdisk seems to think the disk is in use. I think we have the smoking gun.

Adding some df and swapon -s now to see if this I can see the disk in use by some other tools. Next step if to dig up sfdisk source and see what makes it think it is use.

Maybe --force or --no-reread as suggested by the error mesage as a BFMI workaround?

--- /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh 2019-05-04 17:58:07.000000000 -0400
+++ /mnt/init/usr/share/fog/lib/partition-funcs.sh      2019-07-12 08:37:10.000000000 -0400
@@ -73,7 +73,14 @@
     local file="$2"
     [[ -z $disk ]] && handleError "No disk passed (${FUNCNAME[0]})\n   Args Passed: $*"
     [[ -z $file ]] && handleError "No file to receive from passed (${FUNCNAME[0]})\n   Args Passed: $*"
-    sfdisk $disk < $file >/dev/null 2>&1
+#    sfdisk $disk < $file >/dev/null 2>&1
+    sfdisk $disk < $file 
+echo " "
+echo $file
+ls -l $file
+cat $file
+Pause #ESJ
+
     [[ ! $? -eq 0 ]] && majorDebugEcho "sfdisk failed in (${FUNCNAME[0]})"
 }
 # $1 is the name of the disk drive
@@ -403,6 +410,8 @@
     #[[ $status -eq 0 ]] && applySfdiskPartitions "$disk" "$tmp_file1" "$tmp_file2"
     processSfdisk "$minf" filldisk "$disk" "$disk_size" "$fixed" "$orig" > "$tmp_file2"
     status=$?
+#Pause #ESJ
+
     if [[ $ismajordebug -gt 0 ]]; then
         echo "Debug"
         majorDebugEcho "Trying to fill with the disk with these partititions:"

[Quazz]

@Eric-Johnson Very interesting, here’s what sfdisk man page has to say about it.

sfdisk uses BLKRRPART (reread partition table) ioctl to make sure
       that the device is not used by system or another tools (see also
       --no-reread).  It's possible that this feature or another sfdisk
       activity races with udevd.  The recommended way how to avoid possible
       collisions is to use exclusive flock for the whole-disk device to
       serialize device access.  The exclusive lock will cause udevd to skip
       the event handling on the device.  For example:

              flock /dev/sdc sfdisk /dev/sdc

       Note, this semantic is not currently supported by udevd for MD and DM
       devices.

So perhaps adding flock $disk before sfdisk $disk < $file will resolve it

Making the line read as flock $disk sfdisk $disk < $file

[Eric Johnson]

@Quazz

Reading the man page eh? Silly me downloading util-linux and tracing through source… LOL. (Hadn’t really started that except the download part )

Three times with flock $disk sfdisk $disk < $file now, no resize errors.

Gonna remove all the debug code and let em run to completion now.

I think ya got it though! Thanks!

[Tom Elliott]

This is really good information. I suppose it could be useful especially with the speed of NVMe usurping so many other disk access things, maybe udev is the issue the whole time in regards to “sporadic access” and usability?

Thank you all for the debugging and communication.

[Eric Johnson]

Two 4 stations multicasts. No resize problems. Below diff is only change. I think this one is done!

diff -u /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh /mnt/init/usr/share/fog/lib/partition-funcs.sh 
--- /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh 2019-05-04 17:58:07.000000000 -0400
+++ /mnt/init/usr/share/fog/lib/partition-funcs.sh      2019-07-12 10:26:47.000000000 -0400
@@ -73,7 +73,7 @@
     local file="$2"
     [[ -z $disk ]] && handleError "No disk passed (${FUNCNAME[0]})\n   Args Passed: $*"
     [[ -z $file ]] && handleError "No file to receive from passed (${FUNCNAME[0]})\n   Args Passed: $*"
-    sfdisk $disk < $file >/dev/null 2>&1
+    flock $disk sfdisk $disk < $file >/dev/null 2>&1
     [[ ! $? -eq 0 ]] && majorDebugEcho "sfdisk failed in (${FUNCNAME[0]})"
 }
 # $1 is the name of the disk drive

[Eric Johnson]

Found a couple more sfdisk that might need protecting…

[root@fog ipxe]# diff -ur /mnt/init-orig/usr/share/fog/lib /mnt/init/usr/share/fog/lib
diff -ur /mnt/init-orig/usr/share/fog/lib/funcs.sh /mnt/init/usr/share/fog/lib/funcs.sh
--- /mnt/init-orig/usr/share/fog/lib/funcs.sh   2019-05-04 17:58:07.000000000 -0400
+++ /mnt/init/usr/share/fog/lib/funcs.sh        2019-07-12 12:57:23.000000000 -0400
@@ -1977,7 +1977,7 @@
         sfdiskLegacyOriginalPartitionFileName "$imagePath" "$disk_number"
         if [[ -r $sfdiskoriginalpartitionfilename ]]; then
             dots "Inserting Extended partitions (Original)"
-            sfdisk $disk < $sfdiskoriginalpartitionfilename >/dev/null 2>&1
+            flock $disk sfdisk $disk < $sfdiskoriginalpartitionfilename >/dev/null 2>&1
             case $? in
                 0)
                     echo "Done"
@@ -1988,7 +1988,7 @@
             esac
         elif [[ -e $sfdisklegacyoriginalpartitionfilename ]]; then
             dots "Inserting Extended partitions (Legacy)"
-            sfdisk $disk < $sfdisklegacyoriginalpartitionfilename >/dev/null 2>&1
+            flock $disk sfdisk $disk < $sfdisklegacyoriginalpartitionfilename >/dev/null 2>&1
             case $? in
                 0)
                     echo "Done"
diff -ur /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh /mnt/init/usr/share/fog/lib/partition-funcs.sh
--- /mnt/init-orig/usr/share/fog/lib/partition-funcs.sh 2019-05-04 17:58:07.000000000 -0400
+++ /mnt/init/usr/share/fog/lib/partition-funcs.sh      2019-07-12 10:26:47.000000000 -0400
@@ -73,7 +73,7 @@
     local file="$2"
     [[ -z $disk ]] && handleError "No disk passed (${FUNCNAME[0]})\n   Args Passed: $*"
     [[ -z $file ]] && handleError "No file to receive from passed (${FUNCNAME[0]})\n   Args Passed: $*"
-    sfdisk $disk < $file >/dev/null 2>&1
+    flock $disk sfdisk $disk < $file >/dev/null 2>&1
     [[ ! $? -eq 0 ]] && majorDebugEcho "sfdisk failed in (${FUNCNAME[0]})"
 }
 # $1 is the name of the disk drive

[Sebastian Roth]

@Eric-Johnson @Quazz You guys rock!! Thank you very much for digging that deep and finding this!

From the sound of what you describe it pretty much is some kind of timing issue and therefore perfectly matches the findings on the device being busy/locked at that stage. While I still don’t really understand why this is happening now but has not occurred (or not being reported) in the past much I am pretty confident that you have hit the nail on the head with this.

Looking through the scripts I see even more places where sfdisk might bite us and I have a feeling that some other issue reports we currently have might be caused by this same busy/lock problem with sfdisk somewhere else in the scripts. Here is a full (?) list of the places:

roth@x220:~/workspace/fog/fos/Buildroot/board/FOG/FOS/rootfs_overlay$ find . -type f -exec grep "sfdisk " {} /dev/null \; | grep -v -e ":[[:space:]]*#" -e majorDebugEcho
./usr/share/fog/lib/partition-funcs.sh:    sfdisk -d $disk 2>/dev/null > $file
./usr/share/fog/lib/partition-funcs.sh:    sfdisk $disk < $file >/dev/null 2>&1
./usr/share/fog/lib/partition-funcs.sh:    sfdisk -d $disk 2>/dev/null | egrep '(Id|type)=\ *[5f]' | wc -l
./usr/share/fog/lib/partition-funcs.sh:            parttype=$(sfdisk -d $disk 2>/dev/null | awk -F[,=] "/^$escape_part/{print \$6}")
./usr/share/fog/lib/partition-funcs.sh:            sfdisk -d $disk
./usr/share/fog/lib/funcs.sh:    local count=$(sfdisk -d $disk 2>/dev/null | awk /start=\ *[1-9]/'{print $4+0}' | sort -n | head -n1)
./usr/share/fog/lib/funcs.sh:    [[ $hasgpt -eq 0 ]] && have_extended_partition=$(sfdisk -l $disk 2>/dev/null | egrep "^${disk}.* (Extended|W95 Ext'd \(LBA\))$" | wc -l)
./usr/share/fog/lib/funcs.sh:            sfdisk -d $disk 2>/dev/null > $sfdiskfilename
./usr/share/fog/lib/funcs.sh:            sfdisk -d $disk 2>/dev/null > $sfdiskfilename
./usr/share/fog/lib/funcs.sh:            sfdisk $disk < $sfdiskoriginalpartitionfilename >/dev/null 2>&1
./usr/share/fog/lib/funcs.sh:            sfdisk $disk < $sfdisklegacyoriginalpartitionfilename >/dev/null 2>&1
./usr/share/fog/lib/funcs.sh:    fsid="$(sfdisk -d "$disk" |  grep "$part" | sed -n 's/.*Id=\([0-9]\+\).*\(,\|\).*/\1/p')"

Question: Is there a good reason that we shouldn’t add flock ... to all those calls as well? @Eric-Johnson @Quazz @Tom-Elliott

Though I don’t know if the same can even happen if sfdisk is just reading (-d for dumping the table) instead of it writing to disk but on the other hand I reckon adding flock ... wouldn’t hurt it in any case?!?! On the other hand it sounds a bit like “we don’t know what’s happening here so let’s just try to hit everything with a rock that looks like it might be dangerous” - not my kind of style.

[fry_p]

Just want to chime in to say good job everyone! I would have thrown my hat in for testing fixes if I wasn’t sweating my buns off in hot school buildings reassembling classroom technology. I have experienced a pattern of right after uploading an image, as the upload is complete and the machine attempts to come out of sysprep, I get an error. Now I am not sure it is related to this, but I heard someone else having the same issue. After re-deploying to the very same machine with the image that was just captured, everything works just fine. Regardless it looks like you guys already have a good idea of what is going on, so I’ll shut up now

[Sebastian Roth]

@fry_p On first read this doesn’t sound related to me but we’ll see. I know you are very busy right now but would you mind opening a new topic with this one as well and post more information there? Picture of the error would be great!

[fry_p]

@Sebastian-Roth said in FOG 1.5.6: Auto resize is unpredictable:

@fry_p On first read this doesn’t sound related to me but we’ll see. I know you are very busy right now but would you mind opening a new topic with this one as well and post more information there? Picture of the error would be great!

I figured a new topic may be in order. I will open one up if I have time the beginning of next week when I would be able to replicate. If I am able to get some time I will gather as much info as possible including error messages and pictures.