Dual Images windows 10 and Ubuntu 16 with UEFI

[Fernando Gietz]

@Sebastian-Roth I am reading the info about UEFI. Very interesting!!! Now I know more about what is UEFI and how does it work.

I post the info of the different commands in my test computer:

gdisk -l /dev/sda
GPT fdisk (gdisk) version 1.0.1

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.
Disk /dev/sda: 500118192 sectors, 238.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 611A1A7F-D5E7-4EB5-87EF-D447B71A8595
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 500118158
Partitions will be aligned on 2048-sector boundaries
Total free space is 33851501 sectors (16.1 GiB)

Number  Start (sector)    End (sector)  Size       Code  Name
   1          923648         1128447   100.0 MiB   EF00  EFI system partition
   2         1128448         1161215   16.0 MiB    0C01  Microsoft reserved ...
   3         1161216       295318015   140.3 GiB   0700  Basic data partition
   4       295319552       451567615   74.5 GiB    8300  
   5       451567616       467191807   7.5 GiB     8200  
root@U032668:~# lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 238,5G  0 disk 
├─sda1   8:1    0   100M  0 part /boot/efi
├─sda2   8:2    0    16M  0 part 
├─sda3   8:3    0 140,3G  0 part 
├─sda4   8:4    0  74,5G  0 part /
└─sda5   8:5    0   7,5G  0 part [SWAP]
sr0     11:0    1  1024M  0 rom  
root@U032668:~# blkid
/dev/sda1: UUID="A47A-9C4F" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="90659379-55aa-43cc-a916-7909278e69d2"
/dev/sda2: PARTLABEL="Microsoft reserved partition" PARTUUID="ff774eb9-c85f-4dae-aac5-9a8efd46e7b4"
/dev/sda3: UUID="385A3AFA5A3AB48A" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="54366076-6bce-46ae-9046-8528edf1876f"
/dev/sda4: UUID="5fdf13da-9c89-476b-b994-3e05c3c36e2a" TYPE="ext4" PARTUUID="a30c61be-de90-45e9-a52b-c78c64ea4b19"
/dev/sda5: UUID="b29da30a-4262-49c2-a7f3-7b3ee9e8a4ea" TYPE="swap" PARTUUID="0953ce8f-1d8d-464a-95af-ad4d724fbbae"

The commands that appears in the blog:

root@U032668:~# efibootmgr -v
BootCurrent: 0014
Timeout: 0 seconds
BootOrder: 0014,0017,000C,000A,000F,0013,0010,000D,000E,0012,000B,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,0011,0015
Boot0000  Startup Menu	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)....ISPH
Boot0001  System Information	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0002  Bios Setup	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0003  3rd Party Option ROM Management	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0004  System Diagnostics	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0005  System Diagnostics	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0006  System Diagnostics	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0007  System Diagnostics	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0008  Boot Menu	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0009  HP Recovery	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot000A  USB:  	PciRoot(0x0)/Pci(0x14,0x0)N.....YM....R,Y.....ISPH
Boot000B  MTFDDAK256TBN-1AR1ZABHA 	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot000C* IPV4 Network - Intel(R) Ethernet Connection (H) I219-LM	PciRoot(0x0)/Pci(0x1f,0x6)/MAC(c8d3ffbd6a14,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)N.....YM....R,Y.....ISPH
Boot000D* MTFDDAK256TBN-1AR1ZABHA : 	BBS(HD,MTFDDAK256TBN-1AR1ZABHA : ,0x400)/PciRoot(0x0)/Pci(0x17,0x0)/Sata(0,0,0)......ISPH
Boot000E  USB:  	BBS(65535,,0x0)/PciRoot(0x0)/Pci(0x14,0x0)......ISPH
Boot000F* hp HLDS DVDRW GUD1N 	PciRoot(0x0)/Pci(0x17,0x0)/Sata(1,0,0)N.....YM....R,Y..0..ISPH
Boot0010* Intel Corporation: IBA CL Slot 00FE v0106	BBS(Network,Intel Corporation: IBA CL Slot 00FE v0106,0x0)/PciRoot(0x0)/Pci(0x1f,0x6)......ISPH
Boot0011  Network Boot	FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0012* hp HLDS DVDRW GUD1N : 	BBS(CDROM,hp HLDS DVDRW GUD1N : ,0x400)/PciRoot(0x0)/Pci(0x17,0x0)/Sata(1,0,0)...0..ISPH

root@U032668:~# parted /dev/sda
GNU Parted 3.2
Usando /dev/sda
¡Bienvenido/a a GNU Parted! Teclee «help» para ver la lista de órdenes.                                                                  
(parted) p                                                                
Modelo: ATA MTFDDAK256TBN-1A (scsi)
Disco /dev/sda: 256GB
Tamaño de sector (lógico/físico): 512B/4096B
Tabla de particiones: gpt
Disk Flags: 

Numero  Inicio  Fin    Tamaño  Sistema de archivos  Nombre                        Banderas
 1      473MB   578MB  105MB   fat32                EFI system partition          arranque, esp
 2      578MB   595MB  16,8MB                       Microsoft reserved partition  msftres
 3      595MB   151GB  151GB   ntfs                 Basic data partition          msftdata
 4      151GB   231GB  80,0GB  ext4
 5      231GB   239GB  8000MB  linux-swap(v1)```

[Fernando Gietz]

I have deployed twice the computer with the dual image and now the grub appears at the first time O_o

[george1421]

@fernando-gietz OK what did you change? Magic only happens on Television.

[Fernando Gietz]

No, any change. The only change was the bcdedit command (following the tutorial that you attached)

[george1421]

@fernando-gietz Just for clarity and those who will be doing the same as you: Did you run that command before you recaptured the reference image, or did you add that bcdedit command to the setupcomplete.cmd file?

[Fernando Gietz]

@george1421 I have recaptured the image.

• Install W10
• Install Ubuntu 16
• Boot under W10 and run the bcdedit command
• Capture the image

[george1421]

@fernando-gietz Very, very, nice.

You can fix it on the front end and then not worry post imaging. That info will help everyone who need to create a dual boot system. Thank you.

[Sebastian Roth]

@george1421 Although I haven’t tested yet I am fairly sure that the “fix” won’t work.

@Fernando-Gietz Please deploy that image to a completely different machine, one you have never deployed this image to before. I am fairly sure it won’t have the Ubuntu boot menu entry.

[george1421]

@sebastian-roth said in Dual Images windows 10 and Ubuntu 16 with UEFI:

Although I haven’t tested yet I am fairly sure that the “fix” won’t work.

Hmmm… I’m thinking that it will work since the change was made “inside windows” and not by external evil “linux” forces. But who really knows…

I might also see the change possibly being reverted if he was deploying Windows 10 CBB, on the next refresh.

I think only time will tell of this “hack” is forever or until the next reboot.

[Sebastian Roth]

@george1421 said in Dual Images windows 10 and Ubuntu 16 with UEFI:

I think only time will tell of this “hack” is forever or until the next reboot.

From my point of view the “hack” should be persistent (at least till the next major Windows update but maybe even beyond that) on that very same machine because bcdedit adds the entry to the NVRAM. But this is not what we transfer to other machines when we capture and deploy and image from/to disk…

[george1421]

@sebastian-roth said in Dual Images windows 10 and Ubuntu 16 with UEFI:

because bcdedit adds the entry to the NVRAM

Ah, now I see the picture, and its clear.

So the only solid solution is running that command in the windows environment. I was under the impression that the command altered something in the media that would be captured by FOG. So possibly a better solution would be to execute that bcdedit command via a FOG snapin.

[Sebastian Roth]

@george1421 said in Dual Images windows 10 and Ubuntu 16 with UEFI:

So the only solid solution is running that command in the windows environment.

No I think you should be able to use the efibootmgr command to do essentially the same thing from a running Linux system like FOS for example.

[Fernando Gietz]

@sebastian-roth I have deployed the dual image to a different machine and … surprise! You are right, the machine boot directly under W10, in the next appears the grub and the posibility to boot under Ubuntu.

I have found a link about NVRAM, I suppose that will be a lot of them but was the first entry in google :

Understanding UEFI variables: http://en.community.dell.com/techcenter/os-applications/f/4457/t/19589262

1- What all information is stored in UEFI VARIABLES?

All configuration setup, vendor information, language information, input/output console, error console, and boot order setting all these information are stored in these variables

 

2- How to get NVRAM variables

You can use UEFI bootable USB to boot the server. You need to have supported files which can give you UEFI shell once server boot from USB. Once you got the UEFI shell you can run UEFI command "dmpstore" to see the variable available in NVRAM. For more options or help just type “? dmpstore”.  If you have Linux installed before in same server in UEFI mode. You can access the EFI partition. Give this command in UEFI shell "FS0:" Now your “/boot/efi “partition is mounted. You can see the content of this volume using ls/dir command. "dmpstore -all > myvariables"  will collect all NVRAM variable to EFI partition. When you reboot your Linux box you will see this file in your /boot/efi location.

 

3- Analysis of variables

You will see lot of entries in the dump file. Variable name, access, data and many more. We will use this example:

Variable NV+RT+BS 'Efi:ConOut' DataSize = 36

This tells that Variable name is Console output which data size is 0X36 in HEX

. This variable is available at runtime (RT) and boot time (BS).

Runtime variable which are available after OS booted and boot time which are available before

OS boot.

4- Mapping of UEFI variables from BIOS to Linux OS.

You can see all these variables are mapped from Linux OS.UEFI variables are mapped through sys entry. Just see to this location /sys/firmware/efi/efivars . It will have all variables which was available in dump file.

All these variables depend on efivarfs kernel modules. If this module is not available you cannot access the variables. It is mounted as  efivarfs file system on /sys/firmware/efi/efivars.

 

 

Parmeshwr_Prasad

Linux Engineer

Dell Inc (Bangalore)```

[Fernando Gietz]

I have made a test.

I have download a dual image, in the first boot W10 like we expect, in the second boot appears the grub menu. The UEFI variables are updated by W10.

If you download an image with only Linux, then the computer doesn’t detect any OS and dones’t boor. You need repair the boot or update the UEFI variables to rebirth the computer.

[Sebastian Roth]

@fernando-gietz said in Dual Images windows 10 and Ubuntu 16 with UEFI:

You need repair the boot

It’s not actually a repair! It’s just something a new computer doesn’t know about yet and FOG is not able to capture and deploy this piece of information yet.

[renanserrou]

Hello, I came to this topic because I was having this same issue with some new Dell computers that arrived here where I work, in my case I didn’t needed to repair the grub, but I could solve this by changing some bios configuration where there’s a option to add uefi boot option and there appears the .efi file of the grub and mark it to boot first. Hope it helps!