Deployed image boot loop - black screen & Press Ctrl Alt Delete
-
@tomcatkzn said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
backup the factory image from a single Dell machine
To me this kind of sounds like a weird partition layout issue. Can you please boot one of the original machines into a debug capture task, hit ENTER twice to get to the shell. Then run
gdisk -l /dev/sda, take a picture of the screen and post here. As well take a look at the image information stored on the FOG server in/images/<IMAGENAME>. Post the contents of the text file calledd1.partitionshere as well. -
@sebastian-roth said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
@tomcatkzn said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
backup the factory image from a single Dell machine
To me this kind of sounds like a weird partition layout issue. Can you please boot one of the original machines into a debug capture task, hit ENTER twice to get to the shell. Then run
gdisk -l /dev/sda, take a picture of the screen and post here. As well take a look at the image information stored on the FOG server in/images/<IMAGENAME>. Post the contents of the text file calledd1.partitionshere as well.Thank you for the helpful diagnostic comments. Just waiting for another install to finish and I’ll do the “debug” task.
Here are the two pictures of/images/DellMaster and d1.partitions
-
@tomcatkzn said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
… Win7-Single disk -multiple partitions-all default settings …
From what we see in the picture this was not captured as “Single disk -multiple partitions” but as “Single disk - Resizable”. So please post the contents of
d1.fixed_size_partitions,d1.minimum.partitionsandd1.original.fstypesas well.We had some issues with
type=departitions a while ago but I think those should be all fixed in RC version. By the way, do you useworkingordev-branch?
Not sure about thetype=27yet. Possibly this is causing the issue. Why is the boot partition type set to be a “Hidden HTFS partition”? I know this is what you got from Dell…So I’d suggest to actually create a fresh image in the web UI, set it so “Multiple partitions - Single Disk” and try capturing again from an original machine that hasn’t been touched yet. I am fairly sure this will work when deploying to another machine.
-
@sebastian-roth said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
@tomcatkzn said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
… Win7-Single disk -multiple partitions-all default settings …
From what we see in the picture this was not captured as “Single disk -multiple partitions” but as “Single disk - Resizable”. So please post the contents of
d1.fixed_size_partitions,d1.minimum.partitionsandd1.original.fstypesas well.We had some issues with
type=departitions a while ago but I think those should be all fixed in RC version. By the way, do you useworkingordev-branch?
Not sure about thetype=27yet. Possibly this is causing the issue. Why is the boot partition type set to be a “Hidden HTFS partition”? I know this is what you got from Dell…So I’d suggest to actually create a fresh image in the web UI, set it so “Multiple partitions - Single Disk” and try capturing again from an original machine that hasn’t been touched yet. I am fairly sure this will work when deploying to another machine.
Thank you again for the help. Sorry for delay. Needed to Eat :]
I last used FOG 0.32 in 2012 - worked great, but I became ill and job went to someone else. That person switched to WDS and left without documentation. I’m a fan of FOG but see I have a lot to catch up on. The work youve done is awesome.Yes - my bad memory: it is indeed Single Disk-Resizeable
I installed from dev-branch to get the latest build, as I am happy to give feedback.
d1.fixed_size_partitions = :1:2:3
d1.minimum.partitions = same as d1.partitions
d1.original.fstypes = NTFS
Am in the process of recapturing the image. Will post progress shortly. -
@tomcatkzn said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
d1.fixed_size_partitions = :1:2:3
d1.minimum.partitions = same as d1.partitionsOk so this has essentially been more or less like “Multiple partitions - Single Disk” because our logic of detecting resizable partitions wasn’t able to figure yours as such and marked them all to be fixed size. Then again I wonder why you are seeing the “Press Control Alt Delete to boot” message on boot after deploying the image to another machine. Sure the Windows version and OS ID set in FOG do match?
Please schedule a debug deploy task for one of your client. Boot it up and start the deployment by running the
fogcommand. After it finished runfdisk -l /dev/sdaand post a picture of the output on screen. -
@sebastian-roth said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
@tomcatkzn said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
d1.fixed_size_partitions = :1:2:3
d1.minimum.partitions = same as d1.partitionsOk so this has essentially been more or less like “Multiple partitions - Single Disk” because our logic of detecting resizable partitions wasn’t able to figure yours as such and marked them all to be fixed size. Then again I wonder why you are seeing the “Press Control Alt Delete to boot” message on boot after deploying the image to another machine. Sure the Windows version and OS ID set in FOG do match?
Please schedule a debug deploy task for one of your client. Boot it up and start the deployment by running the
fogcommand. After it finished runfdisk -l /dev/sdaand post a picture of the output on screen.Yes. Op sys is win7 and image type is set to Win7
I watched the end of the deploy task and it said “Sync Successful” for each partition
I restored it back to the exact same machine and still get "Press Ctrl-Alt-Del to Restart
immediately after bios boot.Am running a debug task now.
-
Disk partitions in Windows:
Output from GDisk -l:
Output from FDisk -l:
Any help greatly appreciated.
-
@TomcatKZN Thanks for the pictures. Although I am sure we have found the issue we still need to figure out what exactly is causing this. I need more information on where those pictures were taken. I’ve tried to replicate this in a test VM but was not successful yet. So I guess my assumptions are wrong.
Please let me know where and when exactly those gdisk and fdisk output pictures were taken. I surely see this is a FOG debug task but was this on a fresh untouched client before capture, after capture or on another machine before / after deployment?
What I am sure is that the partition start positions are moved at some point. And because of that Windows cannot boot. Though I am still not sure if the initial partition layout is crappy or if this is something FOG is causing.
-
@sebastian-roth said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
@TomcatKZN Thanks for the pictures. Although I am sure we have found the issue we still need to figure out what exactly is causing this. I need more information on where those pictures were taken. I’ve tried to replicate this in a test VM but was not successful yet. So I guess my assumptions are wrong.
Please let me know where and when exactly those gdisk and fdisk output pictures were taken. I surely see this is a FOG debug task but was this on a fresh untouched client before capture, after capture or on another machine before / after deployment?
What I am sure is that the partition start positions are moved at some point. And because of that Windows cannot boot. Though I am still not sure if the initial partition layout is crappy or if this is something FOG is causing.
The Gdisk and FDisk output is from a freshly deployed Client which failed.
The same client from which the image was taken.
The picture from windows is before the capture and deploy.
I will install an untouched disk and generate the same output from before the capture. -
GDisk -PreImage:
FDisk-PreImage:
Does this help identify the problem with capturing this image?
-
I also ran Easus partition manager and posted the output.
Seems the 1st partition is fat16. perhaps thats the problem.
Wonder if I can change it to fat32 if it will still work.
What do you think? -
@TomcatKZN Ok thanks, I think Ich found what’s causing this. Just need a little more time to fix. Will get back to you soon.
-
@sebastian-roth said in Deployed image boot loop - black screen & Press Ctrl Alt Delete:
@TomcatKZN Ok thanks, I think Ich found what’s causing this. Just need a little more time to fix. Will get back to you soon.
Awesome. Much appreciated.
-
@TomcatKZN We have a proposal of a fix ready but I want to discuss this with the other developers before we release the fix. The resizing code is crucial and shouldn’t be messed with. Will let you know as soon as possible.
-
Understood. Thank you.
-
@TomcatKZN Discussing this with the other developers I came to the conclusion that using “Single disk - Resizable” in your case might not be a good thing anyway. You want to have a clean backup of the original state on disk as far as I understand. From that point of view you should just use “Single disk - Multiple partitions” which does not touch the partition layout. The Resizable method does work in many cases but there is some magic involved which you don’t want to rely on for your backing up the original disk state I suppose.
I am not saying that we won’t fix things! But from my point of view you just shouldn’t be using the Resizable Image Type for what you are trying to achieve.
I’d suggest creating a new image definition in the web UI using the “Single disk - Multiple partitions” image type and upload from a fresh untouched system again.
Edit: Moved to bug reports!
-
Okay. You have a point about backing up the original disk.
I’ll give that a bash and check if it works.