Here’s something you could try as well. I never needed to do it, but while reviewing information within these forums, I came across an option for Windows XP maintaining Multiple Partition images. Maybe try using FOGprep on the master system, then re-upload and see if that helps you out. Otherwise, you could use the Single Partition, Resizable option as well.
Posts made by Tom Elliott
-
RE: Having issue with connecting to MYSQL database
-
RE: Updating kernel
I know this particular forum hasn’t had any input for a while, but I’m going to try taking a look at this from the GUI as, from what I can tell, the code base does exist in the class files, but the call to it is just a name sub=kernel, but the methods call this as kernel-update. I’ll try to post something in the 0.33 Bugs page as that’s where I’ve been placing any of the code change files for pretty much the rest of the GUI.
It will be a few days probably but hopefully we can manage until then.
P.S. I’m guessing you’re referring to FOG 0.33b having this issue?
-
RE: Having issue with connecting to MYSQL database
For windows xp, try using the single partition resizable option. I never had luck with it writing with multiple partition single disk non-resizable on Xp machines.
-
RE: Having issue with connecting to MYSQL database
Are you good with Linux commands?
I’d check the /images directory and make sure the .mntcheck files are in in both the /images and /images/dev folders. If their not there, type:
touch /images/.mntcheck; touch /images/dev/.mntcheck; chmod -R 777 /images
Then try again. See if that helps you out. To check if you have the files, you’ll need to type:
cd /images; ls -a
Then verify that you see the file. the files with a period in front -> . of the name are hidden otherwise.
Also, just verify the permissions of the directory are 777. Though I’m sure we could refine this as necessary, for now, start small and simple. Just perform:
chmod -R 777 /images just to make sure any system on the network can read and write to the directory. Normally the installation does this for you, but you never know.
-
RE: Boot LTSP from FOG
[quote=“darkapec, post: 14184, member: 11250”]Are you saying I should leave [CODE] ltsp/i386/boot/vmlinuz[/CODE] completely out or does that need to be replaced by something else?[/quote]
Yes, I think Your menu option should look like this:
[FONT=Consolas]LABEL LTSP
MENU LABEL LTSP 12.04 x32
KERNEL ltsp/i386/boot/linux.c32
APPEND initrd=ltsp/i386/boot/initrd.img ro quiet splash[/FONT]
[FONT=Consolas] [/FONT]
[FONT=Consolas]If that still doesn’t work, try:[/FONT]
[FONT=Consolas]LABEL LTSP
MENU LABEL LTSP 12.04 x32
KERNEL ltsp/i386/boot/vmlinuz
APPEND initrd=ltsp/i386/boot/initrd.img ro quiet splash[/FONT] -
RE: Call to undefined method Group::addMember
Try changing the line 210 to:
$this->Group->addMember( $host );
Maybe this will help as the Group class appears to contain the addMember method.
If that doesn’t work, try:
$Group->addMember ($host);
I’m not running 0.32 so I can’t be a good tester for this! Sorry.
and if the variables really need to be adjusted for try:
$group = $this->Group->addMember( $host ); or
$group = $Group->addMember( $host );Also, if The storage group is having the same type of issue try:
$storagegroup = $this->StorageGroup->addMember( $sn ); or
$storagegroup = $StorageGroup->addMember( $sn ); or
$this->StorageGroup->addMember( $sn ); or
$StorageGroup->addMember( $sn );I know this is a lot, but it’s the best advice I can give.
-
RE: Call to undefined method Group::addMember
As it states, addMember() is an undefined method, where is addMember defined within the FOGCore.class.php? I can’t find it and does the same issue occur For Storage group?
Line
[FONT=monospace][COLOR=#000000][RIGHT]286[/RIGHT][/COLOR][/FONT][FONT=monospace][COLOR=#000000] $storagegroup->addMember( $sn );[/COLOR][/FONT]
[FONT=monospace][COLOR=#000000][RIGHT]210[/RIGHT][/COLOR][/FONT][FONT=monospace][COLOR=#000000] $group->addMember( $host );[/COLOR][/FONT]Both of these lines call for the same method, but the method doesn’t actually exist within FOGCore.class.php. I’ll download the tar and see if I can find the method to help with the troubleshooting of this.
[FONT=monospace][COLOR=#000000]B[/COLOR][/FONT] -
RE: Having issue with connecting to MYSQL database
If what you say is correct, do you have an uploaded image for the system you’re trying to image? If not, can you take an image that you’ve already uploaded and assign to the system you want to image and image it that way? This will let you know if it’s solely because you don’t have an actual image with the name you’re attempting to setup.
Again, I’m sorry if I’m missing anything. Not being there to help kind of hinders the troubleshooting steps I can perform and suggest.
-
RE: Asus m51ac
You don’t need to extract or unzip anything. You just place it in the folder and you’re good to go. Try to boot up the system from PXE.
-
RE: Having issue with connecting to MYSQL database
My best guess to this issue is that your file storage information is not correct. Go to the web portal and click Storage Management->All Storage Nodes->DefaultMember. Then near the bottom of the page, make sure the password and username are correct. You’ll probably notice a rather random password in the field, which is causing the issue. You’ll likely have to setup a password for the fog user on the system as well. For example: fog and password. in the password field you just type the plain text password of the user. Then you’ll do the same under fog settings tftp username and password. Then you’ll probably have it up and running. I hope. Not being at the site makes it difficult to trouble shoot the issue though. Hopefully this helps you out.
-
RE: ISO Tutorial: How to set fog to overwrite images
Try multiple Partition, single disk in the image setup.
-
RE: Host registration: hdparm: ioctl 0x304 failed: Inappropriate ioctl for device
I hope this helps you. I only, yesterday, learned about this all. Good Luck!
-
RE: Asus m51ac
Finished building and the kernel is up. I’m testing so if you try to download the bzImage named file you’ll get the same kernel if you try bzImageNEW
-
RE: Having issue with connecting to MYSQL database
Yep,
You won’t be able to do it because the drive you’re having the issue with is smaller in disk size than the systems disk that you created the image from.
Other than that I got nothing man~
-
RE: Problem deploying snap in
Is fog service running on the system? Double check that the fog client is installed and see if that helps you out.
Do do this go to the webpage:
[url]http://<your-fog-server-ip>/fog/client[/url] and download and install the client on the machine. Then try deploying the snap-in.
-
RE: Asus m51ac
If this doesn’t work, for some reason, I’m currently building a kernel based on 3.10.6. It’ll be a little bit, but the file will be called:
bzImageNEW when it’s done.
-
RE: Asus m51ac
Try downloading this one and using it:
[url]https://mastacontrola.com/fogboot/kernel/bzImage[/url]
You should be able to do it with a wget command. Maybe, to be exact, as I have self-signed certificates:
wget --no-check-certificate [URL=‘https://mastacontrola.com/fogboot/kernel/bzImage’]http://mastacontrola.com/fogboot/kernel/bzImage[/URL]
This kernel is based on 3.10.5, It’s also the kernel.core config setup. I am working to build an all kernel right now.
You’ll download this file to:
/tftpboot/fog/kernel/
So full steps would be:
Open terminal on fog server as root:
type:
cd /tftpboot/fog/kernel
mv bzImage bzImage.orig
then wget --no-check-certificate [URL=‘https://mastacontrola.com/fogboot/kernel/bzImage’]http://mastacontrola.com/fogboot/kernel/bzImage[/URL]
-
RE: Asus m51ac
What kernel are you using?
Try updating to a more recent one and see if this helps you out. If worse comes to worse, I can probably build one that has all possible options available, though that would be a kernel around 35 MB’s, or possible larger.
-
RE: Windows 7 image deployment, constant rebooting
I don’t know much about sysprep, other than it’s a method of putting a windows system, very nearly, back into Out Of Box status. After a sysprep is completed, it basically is as if you just started the system for the first time. There are different methods of sysprep, but most usually will, also, include the generalize option with basically removes all driver associations of the particular system so you could place that image onto any machine without issue.
I don’t know how many times you can use it from the current base image setup. Then again, when I recreate an image, I start completely from scratch so I’ve never had to worry about a number limit.