• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login
    1. Home
    2. tlehrian
    3. Best
    T
    • Profile
    • Following 0
    • Followers 0
    • Topics 4
    • Posts 43
    • Best 5
    • Controversial 0
    • Groups 0

    Best posts made by tlehrian

    • RE: Either DHCP failed or we were unable to access http://(ip)/fog//index.php for connection testing

      I recently ran across this same issue, but it was not due to the fast spanning tree protocols. Our IT department added 802.1x authentication on the wired ports of all our switches, but the time out to fail back to MAC authentication was just longer than the 27 seconds @george1421 referenced in his post. We had a handful of hosts work, but a large majority failed. Our IT department had to shorten the 802.1X authentication timeout in order to make this work for us.

      posted in FOG Problems
      T
      tlehrian
    • RE: Error Restoring GPT Partition Tables

      @george1421 Ok. I should have a chance to do this later today. I’m hopeful this leads to a fix for the issue.

      posted in FOG Problems
      T
      tlehrian
    • RE: Error Restoring GPT Partition Tables

      @george1421 I placed one of these machines in legacy mode to see if the drives would exhibit the same behavior and ran the tests you prescribed earlier. Indeed, after two reboots, they did switch, so we can probably rule BIOS type out. Here are the outputs:

      State 1:

      
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
nvme0n1     259:0    0 238.5G  0 disk
nvme1n1     259:1    0   477G  0 disk
|-nvme1n1p1 259:2    0   499M  0 part
|-nvme1n1p2 259:3    0   100M  0 part
|-nvme1n1p3 259:4    0    16M  0 part
|-nvme1n1p4 259:5    0 341.2G  0 part
`-nvme1n1p5 259:6    0 135.1G  0 part

> nvme list

Node             SN                   Model                                    Namespace Usage                      Format           FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1     S499NX0M113634       SAMSUNG MZVLB256HAHQ-000H2               1           2.95  GB / 256.06  GB    512   B +  0 B   EXD71HAQ
/dev/nvme1n1     S498NA0M403426       SAMSUNG MZVLB512HAJQ-000H2               1         149.49  GB / 512.11  GB    512   B +  0 B   EXA71HAQ

> nvme id-ctrl /dev/nvme0n1 -H

NVME Identify Controller:
vid     : 0x144d
ssvid   : 0x144d
sn      : S499NX0M113634
mn      : SAMSUNG MZVLB256HAHQ-000H2
fr      : EXD71HAQ
rab     : 2
ieee    : 002538
cmic    : 0
  [2:2] : 0     PCI
  [1:1] : 0     Single Controller
  [0:0] : 0     Single Port

mdts    : 9
cntlid  : 4
ver     : 10200
rtd3r   : 186a0
rtd3e   : 7a1200
oaes    : 0
  [8:8] : 0     Namespace Attribute Changed Event Not Supported

oacs    : 0x17
 [15:4] : 0x1   Reserved
  [3:3] : 0     NS Management and Attachment Not Supported
  [2:2] : 0x1   FW Commit and Download Supported
  [1:1] : 0x1   Format NVM Supported
  [0:0] : 0x1   Sec. Send and Receive Supported

acl     : 7
aerl    : 7
frmw    : 0x16
  [4:4] : 0x1   Firmware Activate Without Reset Supported
  [3:1] : 0x3   Number of Firmware Slots
  [0:0] : 0     Firmware Slot 1 Read/Write

lpa     : 0x3
  [1:1] : 0x1   Command Effects Log Page Supported
  [0:0] : 0x1   SMART/Health Log Page per NS Supported

elpe    : 255
npss    : 4
avscc   : 0x1
  [0:0] : 0x1   Admin Vendor Specific Commands uses NVMe Format

apsta   : 0x1
  [0:0] : 0x1   Autonomous Power State Transitions Supported

wctemp  : 354
cctemp  : 355
mtfa    : 50
hmpre   : 0
hmmin   : 0
tnvmcap : 256060514304
unvmcap : 0
rpmbs   : 0
 [31:24]: 0     Access Size
 [23:16]: 0     Total Size
  [5:3] : 0     Authentication Method
  [2:0] : 0     Number of RPMB Units

sqes    : 0x66
  [7:4] : 0x6   Max SQ Entry Size (64)
  [3:0] : 0x6   Min SQ Entry Size (64)

cqes    : 0x44
  [7:4] : 0x4   Max CQ Entry Size (16)
  [3:0] : 0x4   Min CQ Entry Size (16)

nn      : 1
oncs    : 0x1f
  [5:5] : 0     Reservations Not Supported
  [4:4] : 0x1   Save and Select Supported
  [3:3] : 0x1   Write Zeroes Supported
  [2:2] : 0x1   Data Set Management Supported
  [1:1] : 0x1   Write Uncorrectable Supported
  [0:0] : 0x1   Compare Supported

fuses   : 0
  [0:0] : 0     Fused Compare and Write Not Supported

fna     : 0
  [2:2] : 0     Crypto Erase Not Supported as part of Secure Erase
  [1:1] : 0     Crypto Erase Applies to Single Namespace(s)
  [0:0] : 0     Format Applies to Single Namespace(s)

vwc     : 0x1
  [0:0] : 0x1   Volatile Write Cache Present

awun    : 1023
awupf   : 0
nvscc   : 1
  [0:0] : 0x1   NVM Vendor Specific Commands uses NVMe Format

acwu    : 0
sgls    : 0
  [0:0] : 0     Scatter-Gather Lists Not Supported

subnqn  :
ps    0 : mp:7.02W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:6.30W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.50W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0760W non-operational enlat:210 exlat:1200 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:2000 exlat:8000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

nvme id-ctrl /dev/nvme1n1 -H
NVME Identify Controller:
vid     : 0x144d
ssvid   : 0x144d
sn      : S498NA0M403426
mn      : SAMSUNG MZVLB512HAJQ-000H2
fr      : EXA71HAQ
rab     : 2
ieee    : 002538
cmic    : 0
  [2:2] : 0     PCI
  [1:1] : 0     Single Controller
  [0:0] : 0     Single Port

mdts    : 9
cntlid  : 4
ver     : 10200
rtd3r   : 186a0
rtd3e   : 7a1200
oaes    : 0
  [8:8] : 0     Namespace Attribute Changed Event Not Supported

oacs    : 0x17
 [15:4] : 0x1   Reserved
  [3:3] : 0     NS Management and Attachment Not Supported
  [2:2] : 0x1   FW Commit and Download Supported
  [1:1] : 0x1   Format NVM Supported
  [0:0] : 0x1   Sec. Send and Receive Supported

acl     : 7
aerl    : 7
frmw    : 0x16
  [4:4] : 0x1   Firmware Activate Without Reset Supported
  [3:1] : 0x3   Number of Firmware Slots
  [0:0] : 0     Firmware Slot 1 Read/Write

lpa     : 0x3
  [1:1] : 0x1   Command Effects Log Page Supported
  [0:0] : 0x1   SMART/Health Log Page per NS Supported

elpe    : 255
npss    : 4
avscc   : 0x1
  [0:0] : 0x1   Admin Vendor Specific Commands uses NVMe Format

apsta   : 0x1
  [0:0] : 0x1   Autonomous Power State Transitions Supported

wctemp  : 354
cctemp  : 355
mtfa    : 50
hmpre   : 0
hmmin   : 0
tnvmcap : 512110190592
unvmcap : 0
rpmbs   : 0
 [31:24]: 0     Access Size
 [23:16]: 0     Total Size
  [5:3] : 0     Authentication Method
  [2:0] : 0     Number of RPMB Units

sqes    : 0x66
  [7:4] : 0x6   Max SQ Entry Size (64)
  [3:0] : 0x6   Min SQ Entry Size (64)

cqes    : 0x44
  [7:4] : 0x4   Max CQ Entry Size (16)
  [3:0] : 0x4   Min CQ Entry Size (16)

nn      : 1
oncs    : 0x1f
  [5:5] : 0     Reservations Not Supported
  [4:4] : 0x1   Save and Select Supported
  [3:3] : 0x1   Write Zeroes Supported
  [2:2] : 0x1   Data Set Management Supported
  [1:1] : 0x1   Write Uncorrectable Supported
  [0:0] : 0x1   Compare Supported

fuses   : 0
  [0:0] : 0     Fused Compare and Write Not Supported

fna     : 0
  [2:2] : 0     Crypto Erase Not Supported as part of Secure Erase
  [1:1] : 0     Crypto Erase Applies to Single Namespace(s)
  [0:0] : 0     Format Applies to Single Namespace(s)

vwc     : 0x1
  [0:0] : 0x1   Volatile Write Cache Present

awun    : 1023
awupf   : 0
nvscc   : 1
  [0:0] : 0x1   NVM Vendor Specific Commands uses NVMe Format

acwu    : 0
sgls    : 0
  [0:0] : 0     Scatter-Gather Lists Not Supported

subnqn  :
ps    0 : mp:7.02W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:6.30W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.50W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0760W non-operational enlat:210 exlat:1200 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:2000 exlat:8000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

      After one reboot, the lsblk command reversed the order of the listing, but still had the drives identified correctly:

      
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
nvme1n1     259:0    0   477G  0 disk
|-nvme1n1p1 259:2    0   499M  0 part
|-nvme1n1p2 259:3    0   100M  0 part
|-nvme1n1p3 259:4    0    16M  0 part
|-nvme1n1p4 259:5    0 341.2G  0 part
`-nvme1n1p5 259:6    0 135.1G  0 part
nvme0n1     259:1    0 238.5G  0 disk

      (I did not run the nvme commands in this state)

      After one more reboot, the drives switched:

      
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
nvme0n1     259:0    0   477G  0 disk
|-nvme0n1p1 259:2    0   499M  0 part
|-nvme0n1p2 259:3    0   100M  0 part
|-nvme0n1p3 259:4    0    16M  0 part
|-nvme0n1p4 259:5    0 341.2G  0 part
`-nvme0n1p5 259:6    0 135.1G  0 part
nvme1n1     259:1    0 238.5G  0 disk

Node             SN                   Model                                    Namespace Usage                      Format           FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1     S498NA0M403426       SAMSUNG MZVLB512HAJQ-000H2               1         149.49  GB / 512.11  GB    512   B +  0 B   EXA71HAQ
/dev/nvme1n1     S499NX0M113634       SAMSUNG MZVLB256HAHQ-000H2               1           2.95  GB / 256.06  GB    512   B +  0 B   EXD71HAQ

> nvme id-ctrl /dev/nvme0n1 -H

NVME Identify Controller:
vid     : 0x144d
ssvid   : 0x144d
sn      : S498NA0M403426
mn      : SAMSUNG MZVLB512HAJQ-000H2
fr      : EXA71HAQ
rab     : 2
ieee    : 002538
cmic    : 0
  [2:2] : 0     PCI
  [1:1] : 0     Single Controller
  [0:0] : 0     Single Port

mdts    : 9
cntlid  : 4
ver     : 10200
rtd3r   : 186a0
rtd3e   : 7a1200
oaes    : 0
  [8:8] : 0     Namespace Attribute Changed Event Not Supported

oacs    : 0x17
 [15:4] : 0x1   Reserved
  [3:3] : 0     NS Management and Attachment Not Supported
  [2:2] : 0x1   FW Commit and Download Supported
  [1:1] : 0x1   Format NVM Supported
  [0:0] : 0x1   Sec. Send and Receive Supported

acl     : 7
aerl    : 7
frmw    : 0x16
  [4:4] : 0x1   Firmware Activate Without Reset Supported
  [3:1] : 0x3   Number of Firmware Slots
  [0:0] : 0     Firmware Slot 1 Read/Write

lpa     : 0x3
  [1:1] : 0x1   Command Effects Log Page Supported
  [0:0] : 0x1   SMART/Health Log Page per NS Supported

elpe    : 255
npss    : 4
avscc   : 0x1
  [0:0] : 0x1   Admin Vendor Specific Commands uses NVMe Format

apsta   : 0x1
  [0:0] : 0x1   Autonomous Power State Transitions Supported

wctemp  : 354
cctemp  : 355
mtfa    : 50
hmpre   : 0
hmmin   : 0
tnvmcap : 512110190592
unvmcap : 0
rpmbs   : 0
 [31:24]: 0     Access Size
 [23:16]: 0     Total Size
  [5:3] : 0     Authentication Method
  [2:0] : 0     Number of RPMB Units

sqes    : 0x66
  [7:4] : 0x6   Max SQ Entry Size (64)
  [3:0] : 0x6   Min SQ Entry Size (64)

cqes    : 0x44
  [7:4] : 0x4   Max CQ Entry Size (16)
  [3:0] : 0x4   Min CQ Entry Size (16)

nn      : 1
oncs    : 0x1f
  [5:5] : 0     Reservations Not Supported
  [4:4] : 0x1   Save and Select Supported
  [3:3] : 0x1   Write Zeroes Supported
  [2:2] : 0x1   Data Set Management Supported
  [1:1] : 0x1   Write Uncorrectable Supported
  [0:0] : 0x1   Compare Supported

fuses   : 0
  [0:0] : 0     Fused Compare and Write Not Supported

fna     : 0
  [2:2] : 0     Crypto Erase Not Supported as part of Secure Erase
  [1:1] : 0     Crypto Erase Applies to Single Namespace(s)
  [0:0] : 0     Format Applies to Single Namespace(s)

vwc     : 0x1
  [0:0] : 0x1   Volatile Write Cache Present

awun    : 1023
awupf   : 0
nvscc   : 1
  [0:0] : 0x1   NVM Vendor Specific Commands uses NVMe Format

acwu    : 0
sgls    : 0
  [0:0] : 0     Scatter-Gather Lists Not Supported

subnqn  :
ps    0 : mp:7.02W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:6.30W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.50W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0760W non-operational enlat:210 exlat:1200 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:2000 exlat:8000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

> nvme id-ctrl /dev/nvme1n1 -H

NVME Identify Controller:
vid     : 0x144d
ssvid   : 0x144d
sn      : S499NX0M113634
mn      : SAMSUNG MZVLB256HAHQ-000H2
fr      : EXD71HAQ
rab     : 2
ieee    : 002538
cmic    : 0
  [2:2] : 0     PCI
  [1:1] : 0     Single Controller
  [0:0] : 0     Single Port

mdts    : 9
cntlid  : 4
ver     : 10200
rtd3r   : 186a0
rtd3e   : 7a1200
oaes    : 0
  [8:8] : 0     Namespace Attribute Changed Event Not Supported

oacs    : 0x17
 [15:4] : 0x1   Reserved
  [3:3] : 0     NS Management and Attachment Not Supported
  [2:2] : 0x1   FW Commit and Download Supported
  [1:1] : 0x1   Format NVM Supported
  [0:0] : 0x1   Sec. Send and Receive Supported

acl     : 7
aerl    : 7
frmw    : 0x16
  [4:4] : 0x1   Firmware Activate Without Reset Supported
  [3:1] : 0x3   Number of Firmware Slots
  [0:0] : 0     Firmware Slot 1 Read/Write

lpa     : 0x3
  [1:1] : 0x1   Command Effects Log Page Supported
  [0:0] : 0x1   SMART/Health Log Page per NS Supported

elpe    : 255
npss    : 4
avscc   : 0x1
  [0:0] : 0x1   Admin Vendor Specific Commands uses NVMe Format

apsta   : 0x1
  [0:0] : 0x1   Autonomous Power State Transitions Supported

wctemp  : 354
cctemp  : 355
mtfa    : 50
hmpre   : 0
hmmin   : 0
tnvmcap : 256060514304
unvmcap : 0
rpmbs   : 0
 [31:24]: 0     Access Size
 [23:16]: 0     Total Size
  [5:3] : 0     Authentication Method
  [2:0] : 0     Number of RPMB Units

sqes    : 0x66
  [7:4] : 0x6   Max SQ Entry Size (64)
  [3:0] : 0x6   Min SQ Entry Size (64)

cqes    : 0x44
  [7:4] : 0x4   Max CQ Entry Size (16)
  [3:0] : 0x4   Min CQ Entry Size (16)

nn      : 1
oncs    : 0x1f
  [5:5] : 0     Reservations Not Supported
  [4:4] : 0x1   Save and Select Supported
  [3:3] : 0x1   Write Zeroes Supported
  [2:2] : 0x1   Data Set Management Supported
  [1:1] : 0x1   Write Uncorrectable Supported
  [0:0] : 0x1   Compare Supported

fuses   : 0
  [0:0] : 0     Fused Compare and Write Not Supported

fna     : 0
  [2:2] : 0     Crypto Erase Not Supported as part of Secure Erase
  [1:1] : 0     Crypto Erase Applies to Single Namespace(s)
  [0:0] : 0     Format Applies to Single Namespace(s)

vwc     : 0x1
  [0:0] : 0x1   Volatile Write Cache Present

awun    : 1023
awupf   : 0
nvscc   : 1
  [0:0] : 0x1   NVM Vendor Specific Commands uses NVMe Format

acwu    : 0
sgls    : 0
  [0:0] : 0     Scatter-Gather Lists Not Supported

subnqn  :
ps    0 : mp:7.02W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:6.30W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.50W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0760W non-operational enlat:210 exlat:1200 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:2000 exlat:8000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-
      posted in FOG Problems
      T
      tlehrian
    • RE: Error Restoring GPT Partition Tables

      I am busy getting ready for our Fall semester to start next week, BUT…

      I will keep a debug task set up for one of our machines in order to do more testing for you all if need be. I’m glad to be part of the solution here, and I promise not to take as long to respond back to a testing request next time… 🙂

      posted in FOG Problems
      T
      tlehrian
    • RE: kernel panic when imaging

      @george1421 I replaced RAM with new, and now I get a BSOD: CLOCK_WATCHDOG_TIMEOUT which indicates it might be the processor.

      This computer has been a thorn in our side - we have replaced the motherboard, and so it’s possible the processor didn’t survive the move. (or it went bad with the previous mobo).

      I’m satisfied that this is not a FOG issue, but a hardware issue, so I think we can call this issue closed. Thanks for the help!

      Tim

      posted in FOG Problems
      T
      tlehrian
    • 1 / 1