@sgtrice If your 7080 firmware/bios disk controller is in raid-on mode, you need to switch to ahci mode. Intel has not (even after 6 years) release the raid controller driver to the linux community. If you have only one drive and not using raid you can leave the disk mode as ahci with no loss of performance.

@Sebastian-Roth they recently changed some thing to get to the internet i had entered credentials when first setup this server they must have done an update and I did not get the prompt to enter new credentials all is good now. Thanks for your help!!

@Sebastian-Roth Thank you for all your help I updated to latest Trunk and followed the troubleshooting guide got all my credentials set correctly and images are capturing now!

@sgtrice oh and also 1.2.0 was revision number 2094.

Current revision is 6,200+ somethin. If that tells you anything… LOT of improvements.