@Sebastian-Roth Ok, I’m going to this this one today : http://www.startech.com/Networking-IO/usb-network-adapters/USB-3-to-Gigabit-Ethernet-NIC-Network-Adapter~USB31000S
chipset ASIX AX88179
EDIT : Sh**t, Tablet didn’t recognize USB 3.0 adapater at boot…
Let’s go to find another adapter !!!
@Wayne-Workman I think we are going to buy this one (Realtek RTL8153).
http://www.tp-link.com/en/products/details/cat-5062_UE300.html
Any know issue with this chipset ?
@Wayne-Workman For now it seems to work only with modified bzImage given by Sebastian (bzImage_rb). No other change (stock ipxe.efi file), last svn used
@Wayne-Workman And network adapter is ASIX AX88772C. I’ll try to buy one USB 3.0, this one is just USB 2.0 an limited to 100Mb…
@Sebastian-Roth Just done, I’ve uploaded image from first tablet I have prepared and deploy it on second one, everything seems fine 
That’s cool ^^
@Sebastian-Roth POPOPO !!! Much better !
Upload task with USB 2.0/100Mb adapter…
Many thanks Seb, that’s great !
@Sebastian-Roth And third test with bzImage_rb (once again on both tablets with iPXE and USB)
iPXE
USB
@Sebastian-Roth Second test, with bzimage_sp. Tested with ipxe and usb key (both tests on both tab)
iPXE
USB
@Sebastian-Roth From beginning I always made each test on 2 tablets, I hope it’s good enough 
ok first one with ipxe file (DEBUG=efi_wrap…)
@Sebastian-Roth Ok, I’ll test this on monday ! Great thanks
@Sebastian-Roth ok done, but I saw no difference (I put loglevel to 7 in fog interface, just in case)
USB
iPXE
@Sebastian-Roth Thanks ! I cross all my fingers too…
@Sebastian-Roth Tested but none of them work, screen stays black…
@Sebastian-Roth Ok done, I have exactly same screem than with ipxe boot
@Sebastian-Roth Oh my personalized kernel, nice
Here you are
@Jbob Is this normal to have original hostname (before renaming with fog hostname changer) on AD ?
It seems that just after sysprep and deploy, computer is first integrated in AD, and then renaming, but older name remains in AD…
Not a big deal, but I have to clean AD each time I deployed computers…
I’ve just deployed 20 Win7 computers, and 2 of them had same error (AD integration was good but not hostname changer)
After upgrading to last client, it works fine.
@Sebastian-Roth I create tablet on fog interface, I have to put “debug earlyprintk=efi” in “Host Kernel Arguments” right ?
@Sebastian-Roth ok good news !
No problem for new binairy, I finish job in 2 hours, test will be for tomorrow morning !
@Sebastian-Roth Do you want me to test the ipxe file you sent to Georges and Wayne ?
For capturing packet dump, I don’t really know how to do that, do you have some tips ? I’ve installed wireshark but I don’t know how to specifically capture packet on one switch port…
