Best posts made by Matthieu Jacquart

@Sebastian-Roth
Ok thanks, that’s good.
Here it is :

@george1421 ok, command “ip addr show” gives me result for usb ethernet adapter :

I updated my fog server each day, including this morning, but no change for blank screen…

@Sebastian-Roth
What do you mean with “Please try as George suggested to see if our client kernel is able to see and use your USB NIC” ?

I’ve just renamed 1454065283074-ipxe.efi as ipxe.efi and put it in tftpboot, check “FOG_KERNEL_DEBUG” in fog settings, but no difference, always blank screen after loding kernel.bz and init.xz…

@Sebastian-Roth ok ok, let’s go… but which ipxe.efi file I have to use ?

@Sebastian-Roth Ok, here it is :

When I launch boot command, nothing happens, it stays on this screen

@george1421 All error are my mistakes :

• I forgot blanck between “consoleblank=0 isdebug=yes”
• for replies “file not found”, I’ve just make error when I wrote the command. When it was weel written, it works immediately

I’m going to reproduce command without making mistakes

@Sebastian-Roth I repeat ipxe shell command without error (I hope so…)

And for fog server command :

root@FOG:/opt/svn/trunk$ ls -al /var/www/fog/service/ipxe/bzImage
-rw-r--r-- 1 fog www-data 6883968 f▒vr.  1 08:06 /var/www/fog/service/ipxe/bzImage
root@FOG:/opt/svn/trunk$ ls -al /var/www/fog/service/ipxe/init.xz
-rw-r--r-- 1 fog www-data 18747540 f▒vr.  1 08:05 /var/www/fog/service/ipxe/init.xz
root@FOG:/opt/svn/trunk$ file /var/www/fog/service/ipxe/bzImage
/var/www/fog/service/ipxe/bzImage: Linux kernel x86 boot executable bzImage, version 4.4.0 (root@debian64) #2 SMP Mon Jan 25 12:44:48 EST 2016, RO-rootFS, swap_dev 0x6, Normal VGA

@Tom-Elliott I typed “boot” after init and kernel loaded, but it always stays on this screen, nothing change.

After that, I typed command without init=/sbin/init but it seems similar

and boot always gives same result (I mean nothing ;))

I can do all test you need, ideally in 2 weeks I had to have cloned these 32 tablet

@Sebastian-Roth OK done, but I saw no differences…

@Sebastian-Roth Ok, I think there are interesting things
Are the command ok for you ?

@Tom-Elliott @george1421 Secure boot is disable in bios, if not I couldn’t even boot on ipxe file

@Sebastian-Roth Something strange with bzImage_epk, it worked yesterday with previous efi file.

@Sebastian-Roth Ok last one !
No change for boot, even after 5 minutes

@Sebastian-Roth ok thaere’s some new info !

Do you want me tot test also with bzImage_epk binary (plus debug earlyprintk=efi) ?

@Sebastian-Roth ok, 2 pictures, before and after “boot” command

@Sebastian-Roth Tested but none of them work, screen stays black…

@Sebastian-Roth POPOPO !!! Much better !

Upload task with USB 2.0/100Mb adapter…

Many thanks Seb, that’s great !

@Sebastian-Roth Just done, I’ve uploaded image from first tablet I have prepared and deploy it on second one, everything seems fine
That’s cool ^^

@bszadmin Hi, old subject, this file was necessary few years ago to deploy image on X2 210 G1, but for at least 2 years everything works fine with official HP bios and Fog 1.5.
What concern do you meet ? is it for X2 210 G1 or G2 (G2 always worked fine).
Matthieu