Posts made by jeremyvdv

I use the NAS to store my images.
so i change the fstab to have a mount point to this directory

Hello

I made a redirection of the images folder of my debian to a nas.

I have access to writing.
The problem is that when I want to capture my image, I get the message that images / dev can not get to / images

Thanks for your help

Hello

This is a problem of config switch.
It’s a swtich Level3.

On one AC port works and not on the other.

I send you the config of its ports for info

Thank you for your help

Not at the moment but I will find that.

I keep you informed

No The dell is on the same switch.

That’s why I have a doubt about the idea of ​​the spanning tree.

And I’m pretty sure the spanning tree is off

do you want to find out by
“or if not it’s best to use one of the Fast/Rapid stp methodologies as their up/down time is much more significantly reduced.”

Thanks

how to explain that works on a Spanning TREE problem?

That’s it

this is what I have:

Great if you have any info
i do not understand … what do you want as information

that’s what I get with this command:

Thank you for your reply.

I can not do “|” keyboard .

I tried lots of things … an idea?
thank you

Hello

When I want to capture from an HP post, I always have this message:

I can decend an image on it but not capture

Thanks for your help

my capture is in court it’s good.

It was necessary to disable the hibernation of the hard disk.

I still have the problem on my hp for DHCP FAILED

IF you have ideas … I test everything in bios

I disabled the TPM in the bios but here is the problem I have now

that’s what I did yes.
Same problem
and the HP post always at the same point DHCP failed

That’s what I understood also yes but the problem is that bitloker is not activated.
Bitlocker can be activated from the bios?
Because on windows it is not

thanks a lot for your help

Hello

on my dell
Whether I’m in AHCI mode or RAID mode … I always have this message:

Sebastian :

I do this in the day
Thanks

GEORGE:

Hello

No I did not solve the problem on HP but I know at least that it comes from the post.

Regarding the DELL I do not understand … what should I do?

Thank you