Best posts made by Hanz

I have a script that @Wayne-Workman wrote, that shows pending host as they come in. I noticed that when a host comes in as pending…all previously accepted/known hosts show as pending as well. When I manually add the host from the list in the log output from said script, all host disappear from pending and all looks as it should.

18/03/2016 10:54:02
 
Pending Hosts:
3557	dmNew1
 
Number of Approved Hosts:
1756
 
Number of Total Hosts:
1757
 
Number of Total MAC addresses:
3558
 
uptime Output:
 10:54:02 up  2:11,  2 users,  load average: 1.00, 1.26, 1.40

I reset the encryption keys after deleting all hosts and adding again from the old database backup from 6549.

the host dmnew was manually set to pending, which shows correctly; however all hosts without a key are showing back up under pending hosts. This has happened since updating to 6777 from 6549. and now I’m currently on 6815.

When I accept the pending hosts listed from output of script, all goes back to normal

I just had to do this and can verify that changing parameters for /images directory in .fogsettings and rerunning installer…then changing it in gui worked like a charm with no export modifcation necessary as fog did it for me. Mounted of course in /etc/fstab as UUID.

@george1421 I had to use *.pushbullet.com and *.api.pushbullet.com for web filtering url in Lightspeed setup

Per svn 6303 multicast clients show “Attempting to check in …Failed”

Apache error log

[Wed Feb 17 10:24:36.668646 2016] [:error] [pid 19608] [client 10.72.217.149:43896] PHP Fatal error: Uncaught Error: Call to a member function get() on unknown in /var/www/html/fog/lib/reg-task/taskqueue.class.php:51\nStack trace:\n#0 /var/www/html/fog/service/mc_checkin.php(3): TaskQueue->checkIn()\n#1 {main}\n thrown in /var/www/html/fog/lib/reg-task/taskqueue.class.php on line 51
[Wed Feb 17 10:24:37.672038 2016] [:error] [pid 19693] [client 10.72.217.148:41360] PHP Fatal error: Uncaught Error: Call to a member function get() on unknown in /var/www/html/fog/lib/reg-task/taskqueue.class.php:51\nStack trace:\n#0 /var/www/html/fog/service/mc_checkin.php(3): TaskQueue->checkIn()\n#1 {main}\n thrown in /var/www/html/fog/lib/reg-task/taskqueue.class.php on line 51
[Wed Feb 17 10:24:38.523917 2016] [:error] [pid 12583] [client 10.72.217.147:44200] PHP Fatal error: Uncaught Error: Call to a member function get() on unknown in /var/www/html/fog/lib/reg-task/taskqueue.class.php:51\nStack trace:\n#0 /var/www/html/fog/service/mc_checkin.php(3): TaskQueue->checkIn()\n#1 {main}\n thrown in /var/www/html/fog/lib/reg-task/taskqueue.class.php on line 51

those were the 4 clients, and it re-iterates every 5 seconds.

Regular imaging check in works fine. I should add that this is multicast from storage node.

@george1421

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Power\

Value
HiberbootEnabled

REG_DWORD set to 0 hex

@Wayne-Workman UPDATE Apparently disabling firewalld.service didn’t stick. Working now
my apologies for assuming it was set correctly.

It would be nice to get a msg when snapin completion occurs. Possibly selectable reports via pushbullet setup page ?

@Sebastian-Roth yes that is correct, I’m sorry I didn’t really explain it thoroughly. ipxe.kpxe works really well so far with all our systems, is there any particular advantages to undionly.kpxe over ipxe.kpxe ?

@Tom-Elliott thanks to you and Mr. Workman…I would have had no way to know which host was showing as pending if it wasn’t for his script.

thanks for all the mysql pointers, and that last line worked like a charm.

@CoxM You could edit the fog.dashboard.js file. This is under /var/www/html/fog/management/js/fog/fog.dashboard.js

In particular, you would look for GraphBandwidthOpts, I think

there should be elements labelled color: … or colors: […,…]

sorry I don’t remember them all

Just delete the line and hard refresh the browser

***this is per Tom Elliott

@Tom-Elliott in hindsight, that does make sense about the waking, but if it was scheduled for immediate deployment could it be made to run WOL, or possibly allow double tasking a single host if one is WOL

I’m afraid there’s not much to see here…The Server config has /opt/fog/snapins as snapin directory, all IP addresses are correct, /opt/fog/snapins on server is (owner-fog:apache chmod to 777) as shown below:

[bcs@fog-server ~]$ cd /opt/fog/snapins
[bcs@fog-server snapins]$ ls -la
total 1324556
drwsrwsr-x 4 fog apache 4096 Oct 22 12:53 .
drwxr-xr-x 6 root root 4096 Oct 21 12:07 …
drwsrwsrwx 2 fog apache 4096 Oct 16 09:25 CA
-rwxrwxrwx 1 fog apache 307200 Oct 16 10:25 ninite.exe
-rwxrwxrwx 1 fog apache 677099526 Oct 16 10:25 OfficeUninstall.exe
-rwxrwxrwx 1 fog apache 6144 Oct 22 12:53 Repin.exe
-rwxrwxrwx 1 fog apache 678899577 Oct 16 10:26 setup_silent.exe
-rwxrwxrwx 1 fog apache 11 Oct 16 10:26 shutdown.bat
drwsrwsrwx 2 fog apache 4096 Oct 16 09:25 ssl
[bcs@fog-server snapins]$

Is there a way to test this manually ?

@Tom-Elliott My apologies, this can be marked as solved. I was restarting fogservice to test for the popups for shutdown, and restart tasking; however restarting the fogservice doesn’t really reset the client like I thought. It requires that the client checks in on it’s normal time ( sleep service time) for the popups to appear.

@Hanz said All snapins are present, and permissions are correct…ftp shows “Index of /” (but nothing there)…Log Viewer is acting as though one of my other nodes is the server. With the Multicast, Scheduler information and so on. While the actual server still shows “no data to read”

@Wayne-Workman I also had this occur, oddly enough after running a snapin that forces the client to update via WSUS. I recently added .NET 4.6.1 to WSUS.

yup. here’s event viewer from that client
The performance counter name string value in the registry is not formatted correctly. The malformed string is 뢭傞碻�鬋쏄军⍮휒㾲籍봯禵ᦂ瞣㛂⯦⿟闚椂↛抋篾귩恫嗋᜸⸑蓣톽�쾐൐⨨莐潋㌍胡빌폍伤밧縒�鬋웘趲ප᥀巽뼉랥躎衙┱禌㾬됯㏨궒外㈦慙ﭯ潘ﯦ랢ꤎ懨䄩賩ꗼ�唹훐⩦�ẏ⾟疽褎⌼凴䞛枢ﴙᚅ옝햌Ш↊ᱰ貼Ӗ醑᥆㔥㎦Ὢ苻☍▩臄ꮨ僭烻�﫿釶⧐첨륗ꃕ⽷㢭�ᬓ욄䤘똎ꖷ뜕뷲훴洬勳꓅뛰“ⵏ敺铨苌哅쇇寒楣ᗳ땦샄쿆ﳸᚅᄽ鱔�⬈잃䯧浯厃ݖ�麳䋺꺋릎揍쟏ކꞯ봮蒵慻ኋ풭聕慻ꛓ젭ฦ崘ᆶ໰㾾ّ腳㗢⧹籛䖩蹯ඝ䎈﨨旑䮋굯䗙阪ꍢ佦빏桟᧑禛捲굃쥏�쑚胬�좮圠ߺ쭷䳭瓕㐕꺯墽䣣씳鳎綸ø쿹淗팅嫵䛕髠텊떪㠷醛ୟꯊ핚隂➼㋳쏔晶럤ﷲ顝༷㛲ㇿ灳ᰲ䷯矂퉷₾�䎡똪胉ᜬ馿ꗶ㏏켗ꔙ柄⽱៟ꉬ蟊贘톙鷤留閸ꗯ䀡膒릹㣩﫛㮃廹죘쓈⛛曬夐뙶빖摷帛룒䚄�됯㍍땫ᢦ戼㑦灰ﻻ�㻩䌲㔔뎤틕慻쪃鈐�㝚ิ뿮⯷浨リ齃鹸⿧ྵ᩽抃똭�ﹹ辗켟䛶渊㝛躴㙎匔ꋅ့畹⅟䅆汐攳섡증뿋蕖멥ꉘᏎ휻︇栿媼楔ꜣ転亥ി医�⿗뽟﷼꼆鹣㣎ᶉꌾ轭끿뙲師߿꼔檑ꢖꪶ羚緓晴埻욽得⡇넃¶鲱鶤᯾ﱘ뤗鈋裂煉⒑貵뎸כּ뉗욻푍붆杍촛깺㛯揝뮳ꄠꍢ饋㛎䳅輧뭩롫㳄䪄☙c豤ᖳ澷督㉁⶝る鞀멒곮綦묭驼浡⩐䘣᧣㿷묶䠗쩆ꎄл㻶ﻟ뉃ڻ耼萐葽쉅탺⻬顈譍钕Ć펰�员䰙⊰벹꨷槚糈줣搗끘贵�㇒ꮃ壕║㫇럐瓥摮˷猉ત榢懺뷵쏝銻㗝舂㊤๶咧썛嶳붯�अ劵庛╘杼ꩥ�㒽죉褓瀍䏨脖죜׮볚⒉案랴´뉗槻ʏ䑈㮜㍯쩏齣ௌ᪒嫖ᵤ솭挖錝쯝໰嚡燀⶚ꪌ뙼ྥ눷腻斤틠ᩆꊥ�껙⮇巙紼糭현䨙ᩰ涏஻⠒츞掕幪ᒻ찄晅⿨Ῐ�₼ⷩ�봔揗䑦౫덇쟞쨘춣ힼ⛏룛�䤅◩ᑐ宺ꦝ긵睤�薨䭆딐ﰶ췘ք唀劯텆辑䳙㉘骓篙帯㦛菇䑧ላ鳂ʢ͉糨賐൨僔蔱㇢䴝쎄㝣ᘓ찤䯕漣枾拂泇갦᧱な驒懑磷嫬苕➄뤦浧뷚ẋ嚳蚵ꡥ塅₌鈝㾒⁞껡ᤦ䝅握贚夑䁱ᣏꖶ込短␗咎꫁䢖랣䱾뮿愆衰↛赣刬㬞幦沐躻㔨쌷챴禘붍곈樝⠍툚띏瘶␗棐�ⶑ淯↮䤗邷骪톕힪뛇ם飉簯찍끑蕋�᫮遱ꉆᱭⓂþ们虈뛩䧏씂�襾焢ꆪꔔ썍괽寊氥瞭京�ਖ਼쟴྇茶�翯竽岽䡽ꢎ樳䓰砠શ뗳베宪㚷鹲懹戲�꥙囹鞾㭚ଫꈍ쵓╏系跿塀㋐봏뎲揝�붨䅃�㙥ῼ. The first DWORD in the Data section contains the index value to the malformed string while the second and third DWORDs in the Data section contain the last valid index values.

I got a bunch of “chinese” in my client log when this occurred

also had another warning saying something about registry being open and in use as well

Hope it helps guys.

Yeah, Another node has assumed the role of Server after being set up as server first then /opt/fog/.fogsettings changed to accomodate Storage node install.

@wayne-workman from within the group page–>going to members—>then choose host. Works as normal 1.5.2 master

As I mentioned before in another thread relating to MYSQL error, All nodes under Log Viewer are showing results as though they’re servers. I’m confused as to why one node has decided to become the server…Where in the database is a node “declared” as the main server node ?