Hi,
I’m having the error described here when trying to capture.
The machine is some embedded old linux booting with LILO on a drive without any partition, the cause of the error.
I think setting the image type to raw image sector by sector should avoid reading the partition layout and proceed to the image.
I somehow solved the problem by adding a 1kb partition to the end of the drive.
First sorry for posting in such an old topic, but:
Maybe is not that hard to integrate Let’s Encrypt free ssl certificate in the installer as an option to the self generated certificate?
Maybe just for the web interface and maybe at a later time for compiling ipxe…
@Fernando-Gietz Hi,
I have installed the Host Status plugin on the latest FOG stable version (1.5.8) and it is not working. Running tcpdump on the FOG server does not show any packet to any host on port 445. The FOGPingHosts is working, or at least this is seems from the servicemaster.log
I can telnet from the FOG server to the hosts on port 445.
Where else can I look to debug this?
I finally solved this using the WOL broadcast plugin. Steps:
You can mark this as solved. Thank you!
For others: The remote site has computers with activated and working wake on lan and the router configured for DHCP with next server the IP of the FOG server and filename undionly.kpxe (for legacy BIOS boot).
@Sebastian-Roth Thanks for answering. I have read all the posts, but it is still not clear what we have to do.
We have a location with only 2 computers behind a nat router. The computers are network booting from public ip of the FOG server. The setup works manually so we can wake on lan the computers using the mac and port forward but we need to automate this task when scheduling from FOG, so FOG wakes up the computers.
As a workaround I will set up a cron job to wake the computers before the task in FOG, but it was trying to find something built in FOG or there is a plugin to do this.
Maybe adding the pair IP + port to the host then edit wakeonlan.class.php to use that if it is defined, but I am bad at php…
Hi,
I am new to FOG and first I want to say thank you for all this good work.
I need to wake up hosts over the internet which are behind a router. The router is set with static mac for every needed host.
The only reference I found for something like this is in the wiki: https://wiki.fogproject.org/wiki/index.php/WOL_Forwarding#WoL_Forwarding
I also found that the hosts table has a hostIP field but this field is not present anywhere on the management interface, or I can not see it.
How can I ease the wake on lan for hosts behind different IPs to use with FOG scheduled tasks?