Posts made by Gardinero

Hello Guys,

as my system disk crashed, I had to resetup my whole FOG-Server. Fortunately I still had a database dump.
So I reinstalled Ubuntu server, FOG 1.2.0 added the database and directly updated to FOG GIT-version 6303. After some doublechecking of my configuration everything seemed to work perfectly.

Today I wanted to capture my first image after the crash, but the image is not saved to my storage.
The process starts normally, and shows the capture of all partitions, but in the end when

“Updating Database” is shown, this fails and I get the message

“An error has been detected!
Could not complete tasking (bin/fog.upload)”

Does anybody have an idea, what is wrong?

Thank you in advance.

Regards
Lars

I just updated to 5760. Still the same.

I tried pasting without hypens, and also typing the product key manually, but still the same issue.

@Wayne-Workman Sorry, I did not see you post. I will update to the latest trunk and check again.

Hi,

I tried both ways.

Let’s assume the following:

Win 7 Product-Key: 8G5KK-JRS5Y-WRT98-72H5B-V9V2A

If I paste it including the hyphens, it is shown without hyphens, as long as the cursor stays in the filed.
After clicking on “update” to save, only this is shown in the field:

8G5KK-JRS5Y-WRT98-72H5B-V

When I click into the field again, I only see

GKKJRSYWRT9HBV

until the page is reloaded.

The same happens, when pasting

8G5KKJRS5YWRT9872H5BV9V2A

and doing the mentioned steps.

Regards
Lars

Hello,

I use FOG 5754.

When I try to add a product key through the webinterface (in Mozilla Firefox), the last four digits are cut. When I click into the field again, there a different and shorter characterstring is shown.

Regards
Lars

@Wayne-Workman Perfect. Thanks a lot!

Sorry to open this thread again…

Where exactly does the install-script get the ip (${ipaddress}) from?

I just saw, that it pulls an old ip, which is not valid any more.

Thanks in advance.

Regards
Lars

Thanks a lot!! Now it is solved.

I absoutely love this forum.

Can I mark the thread as solved?

Regards
Lars

Hello there,

after following the guide https://wiki.fogproject.org/wiki/index.php/Upgrade_to_trunk, my FOG server is not working properly anymore.

Can anybody tell me, where the second ip on the screenshot is configured?

Thanks in advance.

Regards
Lars

Ok, I feel absolutely sheepish about this… I made a huge error in reasoning…

I thought the dialog during host registration

Would you like to image this computer now?

would mean, if I want to save an image of the new host’s harddisk.

I am so sorry.

Thank you very much.

I hope now everything will be fine for me.

Regards
Lars

Hello,

the image should be here:
https://forums.fogproject.org/uploads/files/1436202691336-2015-07-06-19_03_46.png

I attached it to my last post.

Here you find the output of

ls -lahRt /mnt/sdb1/images

xlvideo@ham-fog-server:~$ ls -lahRt /mnt/sdb1/images
/mnt/sdb1/images:
insgesamt 12K
drwxrwxrwx 3 fog     root 4,0K Jul  6 19:00 .
drwxrwxrwx 2 fog     root 4,0K Jul  6 18:59 dev
-rwxrwxrwx 1 root    root    0 Jul  6 12:32 .mntcheck
drwxrwxrwx 4 xlvideo root 4,0K Jul  6 12:30 ..

/mnt/sdb1/images/dev:
insgesamt 8,0K
drwxrwxrwx 3 fog  root 4,0K Jul  6 19:00 ..
drwxrwxrwx 2 fog  root 4,0K Jul  6 18:59 .
-rwxrwxrwx 1 root root    0 Jul  6 12:32 .mntcheck

Greetings.
Lars

Hello,

here are my permissions:

/mnt/sdb1/:
insgesamt 28
drwxrwxrwx 4 xlvideo root  4096 Jul  6 12:30 .
drwxr-xr-x 4 root    root  4096 Jul  6 13:22 ..
drwxrwxrwx 3 fog     root  4096 Jul  6 19:00 images
drwxrwxrwx 2 xlvideo root 16384 Jun 30 17:15 lost+found

/mnt/sdb1/images:
insgesamt 12
drwxrwxrwx 3 fog     root 4096 Jul  6 19:00 .
drwxrwxrwx 4 xlvideo root 4096 Jul  6 12:30 ..
drwxrwxrwx 2 fog     root 4096 Jul  6 18:59 dev
-rwxrwxrwx 1 root    root    0 Jul  6 12:32 .mntcheck

/mnt/sdb1/images/dev:
insgesamt 8
drwxrwxrwx 2 fog  root 4096 Jul  6 18:59 .
drwxrwxrwx 3 fog  root 4096 Jul  6 19:00 ..
-rwxrwxrwx 1 root root    0 Jul  6 12:32 .mntcheck

/mnt/sdb1/lost+found:
insgesamt 20
drwxrwxrwx 2 xlvideo root 16384 Jun 30 17:15 .
drwxrwxrwx 4 xlvideo root  4096 Jul  6 12:30 ..

And the screenshot of the error message.

On the FOG-Server I am running Ubuntu 14.04 LTS. If you have a recommendation for a better server OS, I am open to any suggestions.

The clients all run Windows 7 Pro x64 (German edition).

Greetings.
Lars

Hey Guys,

it is absolutely frustrating, but I don’t find a solution for this problem.

I now changed the permissions of the folder /image to 777 recursively.
I also went through the troubleshoot guide twice, but still the same.

I tried three different clients (hosts), but always the same message…

I also removed FOG completely and reinstalled it. No change…

Do you perhaps have another idea, or are there any log files I can check?

Thank you in advance.

Lars

Hello there,

my first day in this forum and already the second thread…

When trying to image a host, I always get the error message

Unable to locate image store

I know, that there are several threads concerning this issue in this forum, but unfortunately I did not find a solution yet.

I checked the permissions of my /image directory.

drwxr-xr-x   4 fog  root  4096 Jul  3 12:13 images
drwxrwxrwx 2 fog root 4096 Jul  3 12:13 dev

There are also .mntcheck files in both directories…

Can anybody help me, please?

Thank you in advance.

Regards
Lars

Guys, thank you very much. I found the solution for this issue. I changed FOG_WEB_HOST to 192.168.2.100 and the PXE-Boot is working.

But now I get the message

“Unable to locate image store”

Although there are several threads concerning this issue in this forum, I did not find a solution yet…

I think I will create a new thread.

Regards
Gardinero

Hey guys,

I am trying FOG-server on a computer with two network interfaces.
eth0 should be used to access the web interface as well as internet access.
The server IP address is 192.168.1.141.

eth1 should be the interface for imaging. This one is configured to the address 192.168.2.100.

During FOG installation I chose to not use an existing DHCP-Server, but using the FOG DHCP server. This one is configured to eth1 and is already working.

    Base Linux: Debian
     Detected Linux Distribution: Ubuntu
     Installation Type: Normal Server
     Server IP Address: 192.168.1.141
     DHCP router Address: 
     DHCP DNS Address: 
     Interface: eth1
     Using FOG DHCP: 1

The corresponding FOG-Settings are the following:

FOG_TFTP_HOST = 192.168.2.100
FOG_WEB_HOST = 192.168.1.141
FOG_WOL_HOST = 192.168.2.100
FOG_WOL_INTERFACE = eth1
FOG_NFS_ETH_MONITOR = eth1
FOG_UDPCAST_INTERFACE = eth1

When PXE-Booting from a machine directly connected to the server’s eth1, I get the following error message:

http://192.168.1.141/fog/service/ipxe/boot.php… Network unreachable

Can anybody help me configuring this to 192.168.2.100??

Thank you in advance.

Regards
Gardinero