@george1421 I updated my original Post with all the information.
Thank you for forwarding / looking into it!

@Tom-Elliot updating the client did the trick.
With 0.10.6 the communication works.

And I could deploy a snapin!

Sorry that I missed to upgrade the client.

------------------------------------------------------------------------------
--------------------------------Authentication--------------------------------
------------------------------------------------------------------------------
 08.06.2016 11:59 Client-Info Version: 0.10.6
 08.06.2016 11:59 Client-Info OS:      Windows
 08.06.2016 11:59 Middleware::Authentication Waiting for authentication timeout to pass
 08.06.2016 11:59 Middleware::Communication Download: http://172.1.5.24/fog/management/other/ssl/srvpublic.crt
 08.06.2016 11:59 Data::RSA FOG Server CA cert found
 08.06.2016 11:59 Middleware::Authentication Cert OK
 08.06.2016 11:59 Middleware::Communication POST URL: http://172.1.5.24/fog/management/index.php?sub=requestClientInfo&authorize&newService
 08.06.2016 11:59 Middleware::Response Success
 08.06.2016 11:59 Middleware::Authentication Authenticated

@Joe-Schmitt Answer part 1/2:
I created the zip with 7-zip 16.02 and 7-zip18.01, as well as with native Windows 7 native zip.
None of them where successful.

Interestingly enough I installed/deployed the SnapinPack without errors on another Windows 10 Version 1709 machine.
Difference is the combination of Language and input type. This new one has Language German and input type Swiss German.

Sharable Zip for testing will come in my next answer. I also want to test if I find more machines that fail this peculiar case.

Edit: 2018/03/20
Answer part 2/2
A minimalistic snapinpack. Just a batch that should redirect echo to %temp%
https://earth.dinterface.ch/index.php/s/aEAB4KiwrMOMPWC/download
fogproject

It fails with same error on machines with Language Englisch US, Keyboard Swiss German.
But I could run it on a system with Language German, Keyboard Swiss German. (Win10 Version is not the same)

Hi

@Joe-Schmitt sorry for my delay too.
Thank you for your option to check it remote.
I was perparing some VMs so that you could access it vor remote and I have found out that with same Win10 Image, but Version 1803 that just came out, I can install Snapin Packs again.

And my Version of Fog is still the same.
I will still lookout for it, but I would say it is an issue with either 1709 or something specific with Windows internally.

From my perspective we can close this issue.

Hi,

I did more testing. I changed Language to German/Switzerland, but it didn’t help.
Neither creating the zip on the target machine.

Same error as before.

But with older Win10 Versions I have no issues.

kind regards
Eduardo

@Joe-Schmitt Answer part 1/2:
I created the zip with 7-zip 16.02 and 7-zip18.01, as well as with native Windows 7 native zip.
None of them where successful.

Interestingly enough I installed/deployed the SnapinPack without errors on another Windows 10 Version 1709 machine.
Difference is the combination of Language and input type. This new one has Language German and input type Swiss German.

Sharable Zip for testing will come in my next answer. I also want to test if I find more machines that fail this peculiar case.

Edit: 2018/03/20
Answer part 2/2
A minimalistic snapinpack. Just a batch that should redirect echo to %temp%
https://earth.dinterface.ch/index.php/s/aEAB4KiwrMOMPWC/download
fogproject

It fails with same error on machines with Language Englisch US, Keyboard Swiss German.
But I could run it on a system with Language German, Keyboard Swiss German. (Win10 Version is not the same)

@Joe-Schmitt I have to check tomorrow. As my target Win10 with 1709 is not online at the moment.
On another with 1703 I could install the SnapinPack.
If testing and stuff doesn’t bring good results, I’ll try to create a smaller/sharable SnapinPack.

@Joe-Schmitt it was 7-zip on a Windows 7 machine.
If it helps I’ll test it with native Windows. Keep you posted.

@george1421 I updated my original Post with all the information.
Thank you for forwarding / looking into it!

thanks for your request.

Yes I did it manually and it works. Unzip it without any issues.
Then cmd as admin-> setup.exe /config config.xml.
Background process is started and after some time Visio is installed.

And as mentioned for Windows 7 targets the SnapinPack works.

FOG Version 1.5.0
FOG Client Version 0.11.15

Snapinpack with Visio 2016 or Office 2016
Target systems: Win7 and Win10
Win7 works
Win10 fails with error.

Hi
as mentioned in title I have problems deploying SnapinPacks on Windows 10.
Here the full log entry on from the client. (removed mac Addresses)

---------------------------------SnapinClient---------------------------------
------------------------------------------------------------------------------
15/03/2018 15:23 Client-Info Client Version: 0.11.15
 15/03/2018 15:23 Client-Info Client OS:      Windows
 15/03/2018 15:23 Client-Info Server Version: 1.5.0
 15/03/2018 15:23 Middleware::Response Success
 15/03/2018 15:23 SnapinClient Running snapin Visio_2016_x32
 15/03/2018 15:23 Middleware::Communication Download: http://fogserver/fog/service/snapins.file.php?mac=xx&taskid=87
 15/03/2018 15:23 SnapinClient C:\Program Files (x86)\FOG\tmp\Visio2016Pro_x32_en.zip
 15/03/2018 15:23 SnapinClient Processing SnapinPack Visio2016Pro_x32_en.zip
 15/03/2018 15:23 SnapinClient Extracting SnapinPack
 15/03/2018 15:23 SnapinClient ERROR: 1 is not a supported code page.
Parameter name: codepage
 15/03/2018 15:23 Middleware::Communication URL: http://fogserver/fog/service/snapins.checkin.php?taskid=87&exitcode=-1&mac=xx&newService&json
------------------------------------------------------------------------------

My target machines have these specs:
Edition: Windows 10 Enterprise
Version/Build: 1709
Location: Switzerland
Language: English (United States)
Keyboard layout: Swiss German

Searching the web I found this:
https://github.com/chef/chef-dk/issues/1290#issuecomment-323185687

Is it the same issue?

Thanks for your help.
Kind Regards
Eduardo

I know this thread is two years old.

Still I love both projects, FOG and GLPI! And I would love to see this work. So thank you guys for all the good work!
As FOG already does HW inventory, would be nice to use it in GLPI, so I don’t have to install ocsinventory and another client.

Hey Alexandre,

still around? Does your FOGTRansfert GLPI plugin work with FOG 1.3?
And I’ve seen that GLPI has newer version too, I couldn’t install the plugin.
Could you update the plugin please?

I’m not a coder, but if I can help, let me know.

Cheers
Eduardo

@Tom-Elliot updating the client did the trick.
With 0.10.6 the communication works.

And I could deploy a snapin!

Sorry that I missed to upgrade the client.

------------------------------------------------------------------------------
--------------------------------Authentication--------------------------------
------------------------------------------------------------------------------
 08.06.2016 11:59 Client-Info Version: 0.10.6
 08.06.2016 11:59 Client-Info OS:      Windows
 08.06.2016 11:59 Middleware::Authentication Waiting for authentication timeout to pass
 08.06.2016 11:59 Middleware::Communication Download: http://172.1.5.24/fog/management/other/ssl/srvpublic.crt
 08.06.2016 11:59 Data::RSA FOG Server CA cert found
 08.06.2016 11:59 Middleware::Authentication Cert OK
 08.06.2016 11:59 Middleware::Communication POST URL: http://172.1.5.24/fog/management/index.php?sub=requestClientInfo&authorize&newService
 08.06.2016 11:59 Middleware::Response Success
 08.06.2016 11:59 Middleware::Authentication Authenticated