Topics created by Eazis

@george1421 said in Multicast stuck:

[09-18-24 9:36:35 am] Interface not ready, waiting for it to come up: 10.54.68.101
[09-18-24 9:36:45 am] Interface not ready, waiting for it to come up: 10.54.68.101
[09-18-24 9:36:55 am] Interface not ready, waiting for it to come up: 10.54.68.101

If you disable the storage node then you will get this message inside the log.

I found out that it wasn’t a FOG problem but i mixed up some vlans together.
Multicast works now. Problem solved.

@george1421 Ok thanks for your reply. In the past i already did some research and found the arch 7 flags.

I will check out the uuid and come back with results. Thanks.

@tom-elliott Many thanks!! I used now the internal ip address of the AD server … This was the whole problem.
A vaild domain name here did not work.

Normally this AD server is reachable with this fqdn YYYY.XXXX.com (it’s not the real domain). I can’t type public this domain here for security reasons.

I can now login with users from my AD into FOG.

@Eazis Sounds good, thanks for the feedback!

@eazis said in PXE UEFI boot problems:

NBP filename is ipxe.efiÿ

Did you copy&paste the filename into the Unifi DHCP settings page? Maybe just clear the setting and re-type by hand to make sure there is no hidden character in that filename field. I can clearly see 0xff in the PCAP file… So either the Unifi DHCP is doing something really weird or there is a character in that field.