hello friends, i know to much time out.
Just to say i can contribute on testing.
abouts this, FOG runs in ARM64/arm/raspberry pi platform?
ps: time to reduce watts consumption and i have shared fog on my twitter
For UBuntu 18.4.01 LTS + fogproject-1.5.4
Try Run this:
sudo echo "deb http://cz.archive.ubuntu.com/ubuntu bionic main universe" >> /etc/apt/sources.list sudo apt-get update sudo apt-get upgrade sudo tar -xzvf fogproject-1.5.4.tar.gz sudo cd fogproject-1.5.4/bin sudo chmod 777 installfog,sh sudo ./installfog.sh
Now you are able to installation
I have on my mind setting up on my FOG server as "bonding ".
I want use 2 Gibabit Ethernet Ports on FOG and 2 Different Switches on same network.
See Image below.
FOG support this feature? or exist a way to do that? or completely crazy impossible?
I am using FOG 1.5.4 + Ubuntu 18.4.01 LTS Server
PS: sorry my ‘englishing’, i hope I can transmitt the write message.
I am out for long time!
Well I think what is problem here. Ubuntu 18 does not come with some repositories on sources.list
I Resolve my problem for intalling fog on ubuntu 18 on that way! Running that: (If you run in root user, remove sudo, of course )
sudo echo "deb http://cz.archive.ubuntu.com/ubuntu bionic main universe" >> /etc/apt/sources.list sudo apt-get update
Now your FOG Installation it’s able to download all packages and install
Best Regards! I hope this helps!
[quote=“brian_, post: 9231, member: 2729”]
I have configure option 66 and 67 on my windows dhcp server and unclicked 60.[/quote]
You need configure 066 --> IP FOG SERVER(192.x.x.x) and 067 --> pxelinux.0 (its zero not o)
and reboot the fog server and reboot client
Please, check if you execute the [COLOR=#0000ff][URL=‘http://fogproject.org/forum/threads/windows-7-deployment-fog-sad2-driver-tool.380/#post-1639’][COLOR=#0000ff][B]STEP 9[/B][/COLOR][/URL][/COLOR]correctly.
I think you don’t need modify zip files on server. I don’t change and works good.
[quote=“ejefferson, post: 4927, member: 1539”]
I seem to have got through everything fine except for the sysprep part. After I run sysprep and then restart the VM it will not PXE boot. Can anyone please help as I am due to deploy Windows 7 to nearly 500 clients next week.
If you’re using VMware Workstation you have to press F12 to boot over a network.
If you’re using VirtualBox you must change the type of processing to PIXX4 (or 3). is a network card from AMD, I think.
Finally! I can Deploy and Upload Caixa Magica and Ubuntu 12LTS.
MAKE INSTALLATION IN VMWARE MACHINE
Make a Primary Partitions and ‘EXT3 with journal’ (/dev/sda1)
SWAP end partition (It is ignored for FOG - by BryzeZ in previous post)
Install grub in /dev/sda1
Install S.O and update
Good deploys for your rooms
[quote=“danuel, post: 2256, member: 628”]Hi all!
Show a bluescreen again (counter %)
The file system in (/dev/sda2) is SWAP (v1), is not supported
Image upload sucessfully.
Now I check the size of created/uploaded image and…
d1.mbr - 32,256 B
d1p1.mbr - 931 B
Hi!! I see now when fog upload a SWAP partition fog doesn’t create the file “[B]d1p2.img[/B]” .
I doesn’t understand why SWAP doesn’t upload :s GGRRRR
[quote=“ssx4life, post: 2754, member: 268”]
Hi This links don’t open, can upload files again please?
I will try that!!
OK SYSPREP ok.
But a question, what chipset I use on VirtualBox? PIIX3 or ICH9?
And what type of IDEController? PIIX3 , PIIX4 or ICH6?
[QUOTE]Because When I deploy the image, the virtualmachine starts MySysPrep Runs… OK … system reboot… and than
Stays a black screen with ‘stopped’ cursor. what’s mean?[/QUOTE]
Well, I am the Impacient guy haha… I onlu need sometime, I think it’s tima to SO update configs
To finish the installation I only need put a RunOnce Command to delete the sysprep folder, or I’m wrong?