Posts made by ch3i

@szecca1 And ensure you have configure your switchs for WOL across VLAN.
Cisco example : http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/91672-catl3-wol-vlans.html

@mm-Ekimia said:

Hi I forgot to end this thread.

We solve this problem by going full Legacy bios on all machines. restoring a singledisk multipartition works great (root partition resizing included)

Thanks everybody for this great project.

Hehe, Thank you for the update

@Wayne-Workman said:

@Tom-Elliott said:

Please try re-running the installer. It seems there was an issue this morning with Sourceforge that cause a 0 byte downloaded file.

@saltlife3122
@davido38
@Chris-Garsee
@crosser

@alltheworld xD

@Julianh
Thank you for your screenshots, but can you test that Wayne-Workman ask for ?

@Wayne-Workman said:

Can you try to use FTP from the FOG server itself? If it works, then that is a valuable troubleshooting piece.

@Wayne-Workman said:

More on the “Pending MAC approvals” thing…

Just imaged a Lenovo L530 and same thing.

Using the legacy client.

It seems like FOG does this every single time you image a laptop (because one wired NIC and one wireless NIC).

It doesn’t matter how many times I approve the MAC addresses for laptops, every time I re-image them, it asks me to approve the MAC addresses again.

Same here on HP desktop DC5800 : Two ethernet cards.

@sudburr Ubuntu is right for desktop, but for a server use a Debian headless

@Tom-Elliott said:

What do you mean?

FOG Is a network booting system. The BIOS needs to be setup to allow network booting as the first option.

@ben-walker https://wiki.fogproject.org/wiki/index.php/FOGUserGuide

@Tom-Elliott said:

What finally fixed it?

Are you using the “fog” user or the admin or the administrator?

@Tom-Elliott said:

What finally fixed it?

Are you using the “fog” user or the admin or the administrator?

Finally ftp://IP/images is OK without anymore configuration, it’s seem to be a native setting in Qnap.

He modify his storage node configuration too.

@Wayne-Workman said:

I’m lost…

Can the below posts be translated to English for future users?

The user FOG on NAS have these access :

NFS root folder : /share/MD0_DATA/images
FTP root folder : /share/MD0_DATA

FOG client try to access to /share/MD0_DATA/share/MD0_DATA/images << that tree is false.
The user FOG can’t browse the / of the NAS.

We try to create a ln :

ln -s /share /share/MD0_DATA/share

But FOG is not an admin of QNap NAS.

Voilà

The LN is because the user FOG in FTP have /share/MD0_DATA as root folder.
It’s Slowave who add it to solve the problem of FOG copy via FTP.

But the user FOG have not the rights on /share…

Any idea ?

Starting helping in french via online chat.

@Slowave said:

My bad English gives a clue about my nationality
I’m at home, I test this afternoon

Not your english, your screenshot lol

@Slowave said:

Hi ! (Fog Server 1.2.0 Storage: QNAP TS-469U)

I want to upload a image to my NAS, and the image don’t go to the folder /NAMeOfMyImage.
SO, i look the tuto Troubleshoot FTP : https://wiki.fogproject.org/wiki/index.php/Troubleshoot_FTP#Permissions But on my host, i have 0
error message. I have “task complete”…“shutdown host”, and when i look on my NAS:

Storage Maganement, i use the user “FOG_TFTP_FTP_USERNAME” ans password. I create the same user/pass on the NAS.

I can " cp -a /share/MD0_DATA/image/dev/@MAC /share/MD0_DATA/images/NameOfMyImage" but It’s not very professional

On the NAS: fog can write/read on the folder “images”

Thank

Hi,

Not sure but chmod in 777 your .mntcheck files.
Ensure that the user FOG on the NAS has the right to move file in FTP. You can check it with a FTP client.

Regards,
Ch3i.

@Joeruffolo https://forums.fogproject.org/topic/4069/fog-1-2-0-dban-advanced-pxe-boot-menu

@afuente26 said:

the diference are two hours. I have to schedule the task two hours less.

I´ve also modified the timezone in the php.ini but this do not afecto the cronjob.

For me it´s a “good” solution.
Thanks to all.
Angel

Good news;)

@DarkEnergy said:

@ch3i
I already did a ls -ltr which display all the folders and subfolders under /images.
You are requesting another listing of the directories in a listing format. Which would be almost the same as the one I already provided.

I’ve a hard day today, where ???

@Neil-Underwood said:

These machines are all on different subnets and are communicating over an MPLS network + VPN. The subnets are being advertised by a Meraki MX80 firewall at the same location as the server and are all part of one big VLAN, in a sense.

I notice when I try: mysql -u root -h <IPOFFOGSERVER> fog
it appends the local IP address to the username.

sradmin@mid-fog-node ~ $ mysql -u root -h 192.168.xxx.200 fog
ERROR 1045 (28000): Access denied for user 'root'@'192.168.yyy.200' (using password: NO)

Could this be causing the authentication failure?

The MySQL database is only on the FOG server (sorry for my crap messages to check if node reply to MySQL requests)

Now, if you use MPLS it’s layer 2 network, ans there is nothing that drop your traffic…

If you can not connect the MySQL server from node storage, you have a network restriction in your MySQL server configuration.

@afuente26 said:

@afuente26

ok. we are progressing. I´ve tested the time in a php-file (date-function) and the apache time is ok.
But I´ve found, that nevertheless it is a time problem.

I´ve tried the following cronjob configuracion, asuming today is the 2 june tuesday, 20:23 hour
The scheduled task worked with exception of the hour:

You have edit your post to past your code, you can paste it in the code tags, the button “</>”

echo "some code"

@Wayne-Workman said:

Inside the FOG DB, there are two multicast association tables. Can you delete all the rows in those tables, re-install FOG, and try again and see what happens?

TRUNCATE TABLE multicastSessions; 
TRUNCATE TABLE multicastSessionsAssoc; 
DELETE FROM tasks WHERE taskTypeId=8;

Via MySQL cli or phpmyadmin (easy to install)

@DarkEnergy said:

@ch3i
Looking at the image info, I got:
"Deploy Method

Partclone"

I am thinking the image should be ok as it is created with Partclone as well. After looking a several of my images, there are all created with Partclone imaging software.

How do I fix the issue?

Partclone is not an issue. Could you ls -l /images/a_bugged_restored_image