Posts made by asbenavides

asbenavides · Aug 17, 2021, 2:22 PM

@tesparza You will need to do a Full Host Registration when you do the network boot.

asbenavides · Jun 10, 2020, 4:18 PM

@george1421 ok once im done imaging ill change it. Thanks a lot for your help!

asbenavides · Jun 10, 2020, 3:30 PM

@george1421 the steps you provided worked great!

asbenavides · Jun 10, 2020, 1:19 PM

@george1421

this is what im getting disregard the previous reply.

lo: <loopback.up.lower_up> mtu65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host to lo
valid_lft forever preferred_lft forever
I get
00:14.3 Network Controller [0280]: Intel Corporation Device [8086:02f0]
00:1f.6 Ethernet Controller [0200]: Interl Corporation Ethernet Connection (10) I219-LM [8086:0d4e}

asbenavides · Jun 10, 2020, 1:04 PM

@george1421 tried that debug checkout box but I still get the same error. “No network interface found” and i’ve check to see if the ethernet port has connectivity and it does has and any other pc does work fine in the same port.

asbenavides · Jun 10, 2020, 12:55 PM

@george1421 the model is this one https://www.dell.com/en-us/work/shop/cty/pdp/spd/latitude-15-5510-laptop/ss012l551015us.

asbenavides · Jun 9, 2020, 11:51 PM

@Sebastian-Roth i dont have trouble with any other machines only this ones every other machine works fine.

asbenavides · Jun 9, 2020, 11:49 PM

@george1421 ill try that tomorrow at work and i was using the onboard network adapter and it didnt work, but i used a usb c network adapter and it did work. The laptop is a Dell Latitude 5510 its a brand new laptop and i have a few that are going to come in later during the month.

asbenavides · Jun 9, 2020, 9:21 PM

Im getting this message when im trying to upload.

“No Network Interface found, your kernel is most probably missing the correct driver! Please check your network setup and try again!”

I’ve already changed patch cord and upgraded to the latest fog which is the 1.5.9-RC2.9. Can anybody help with this issue i’ve been cloning and capturing with no issue but since this is a new model of laptop i think it might have a newer card. The card that i has its an Intel Ehternet Connection l219-LM. Any help will be greatly appreciated!

asbenavides · Jun 9, 2020, 5:35 PM

I had the same issue i followed the steps on this link https://wiki.fogproject.org/wiki/index.php/BIOS_and_UEFI_Co-Existence. Once you have done the steps disable the secure boot on the device itself.

asbenavides · Sep 19, 2018, 12:57 PM

@Wayne-Workman thanks i was able to figure it out, and yes im an old fog user and installer. I had to changed the fogstorage mysqlpassword on my storage node on the .fogsettings (/opt/fog/.fogsettings) Once i changed it to the one provided by the Fog Server everything worked.

asbenavides · Sep 18, 2018, 7:34 PM

Im re attaching the Storage Node to my freshly fog clean install and build but my storage node keeps displaying this message “A Valid Database Connection could not be made” any help will be greatly appreciated

thanks in advance