RC26 FOG_VIEW_DEFAULT_SCREEN *now with RC27
-
Server
- FOG Version: RC26
- OS: CentOS 7.2.1511
Client
- Service Version: n/a
- OS: n/a
Description
I had some time to kill so I built a FOG server from scratch, performing a fresh install of CentOS 7.2.1511 then installing RC26 in order to prove my documentation is still good. And there was much rejoicing.
Once the entire install process was complete I imported users, groups, hosts and images exports OK, then:
FOG View Settings = FOG_VIEW_DEFAULT_SCREEN = LIST (default=search)Clicking on USERS, HOSTS, GROUPS or IMAGES brings me to the SEARCH page only. I can still manually go to the LIST All link, but this setting is not behaving as intended.
-
This was already reported and is fixed upstream.
-
Ahh, there it is.
Huh… wonder how I missed that one?
-
@sudburr Happens. Don’t worry about it.
Ultimately you’re re-worded posting about the problem will help others that are in the RC cycle.
-
Figured out why I missed it again. It is another example of the perils of using pictures instead of text and of quoting text inaccurately.
Searching for either ‘FOG_VIEW_DEFAULT_SCREEN’ or ‘FOG View Settings’ doesn’t find it, but using the incorrect ‘FOG View Setting’ (missing the s) does find it.
-
Updating to RC27 did not fix this.
= result is no list displayed for hosts or images ( I have no groups, snapins or printers )However …
-
FOG_DATA_RETURNED was now blank. Previously it stated 0.
= result is no list. -
Set FOG_VIEW_DEFAULT_SCREEN to Search
= result is no list. -
Set FOG_VIEW_DEFAULT_SCREEN to List
= result is no list. -
Set FOG_DATA_RETURNED to any value
= result is no list. -
Set FOG_VIEW_DEFAULT_SCREEN to Search
= result is no list. -
Set FOG_VIEW_DEFAULT_SCREEN to Search and a FOG_DATA_RETURNED value
= result is no list. -
Set FOG_VIEW_DEFAULT_SCREEN to List and a FOG_DATA_RETURNED with no value
= result is no list. -
Performed a SEARCH from the Image page while no images listed
= returns list of matching image -
Cleared the SEARCH box and revisited HOSTS page
= returns the list -
visited Images page
= returns the list
-
-
@sudburr I don’t understand what you’re meaning?
List is listing things. Search will only search things. Essentially, the data returned 0 means limiting is turned off, but due to the “new” way of searching/listing, the data returned is not even needed. I search in host and the searched for results are returned.
Maybe a Hard Refresh will be needed? (Shift + F5 typically)
-
I mean following the steps I outlined above is how I got it to finally work. Assume a save and a hard refresh on a separate tab to achieve each = . Considering what I found with the storage group association of images yesterday I figured I’d try toggling some settings, and that included the Search vs List option.
It wasn’t until I performed a Search from the Images page that the LIST option setting began to work as intended.
Again, this is on an absolutely from-the-ground-up installation of CentOS followed by RC26. The only thing introduced other than my standard configuration was the importing of exports.
