Solved FOG Client 0.11.5 - Abandons printer too early

[Wayne Workman]

This printer is correctly configured, and the Print Manager helper successfully adds it with this configuration. It does take a hot minute to work though, that I can’t help. The fog client is abandoning it too early. Some printers take longer than others.

 8/15/2016 8:09 AM Printer Adding: BM-Lab-204
 8/15/2016 8:09 AM Printer --> IP = 10.11.1.56
 8/15/2016 8:09 AM Printer --> Port = 10.11.1.56
 8/15/2016 8:09 AM Printer --> File = \\10.51.1.7\printer-drivers\HP_Universal_Print_Driver\upd-ps-x64-6.2.1.20636\hpcu186v.inf
 8/15/2016 8:09 AM Printer --> Config = 
 8/15/2016 8:09 AM Printer --> Model = HP Universal Printing PS
 8/15/2016 8:10 AM PrinterManager PrintUI has not finished in a timely fashion, abandoning process

[Joe Schmitt]

The printer should still get added. The process doesn’t get killed off, the client just stops caring about it.

[Wayne Workman]

Ok, cool.

[Tom Elliott]

That’s what I see when that happens too. While the message is kind of not nice, all still installed fine on my systems.

[Joe Schmitt]

The printer should still get added. The process doesn’t get killed off, the client just stops caring about it.