how to setup FOG server on Isolated netowork
-
if I could ask another question. If the FOG server is running DHCP and is plugged up to a switch without internet access, I should be able to PXE using a laptop plugged up the same switch?
-
@cnbgeren If dhcp is setup correctly and offering the required PXE information then, yes it should.
-
had to take a picture of the command because I could not access internet with FOG server. also could not PXE boot while connected to my router or on Isolated network using switch. thanks for your help
-
@cnbgeren simply edit that /etc/resolv.conf with vi or nano and replace 127.0.0.1 with either your ISP’s dns server or google’s {8.8.8.8)
-
@Wayne-Workman said in how to setup FOG server on Isolated netowork:
https://wiki.fogproject.org/wiki/index.php?title=ProxyDHCP_/dnsmasq-_DRAFT
Where is that post you crated that documented the fedora 23 install. You had a dnsmasq section there that was pretty darn good, short and clear. You could almost dump that section into the draft link from above.
Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!
-
@george1421
I’m sorry I don’t understand what your asking -
@cnbgeren said in how to setup FOG server on Isolated netowork:
@george1421
I’m sorry I don’t understand what your askingYou ran the cat command to show the content of /etc/resolv.conf . That content only looks up internet names from the FOG server. Probably not what you want. You need to edit that file [/etc/resolv.conf] with a text editor (anyone that linux has. Two popular command line ones are vi and nano. There may be a gui based one like gedit that is available to you.) You need to change the entry
nameserver 127.0.0.1to something likenameserver 8.8.8.8save the file and then open a command window and key in ping www.google.com. That should now reply with the IP address and a ping response. -
ok I ran the following command nano /etc/resolv.conf but now I’m getting the this message: DO NOT EDIT THIS FILE BY HAND–YOUR CHANGES WILL BE OVERWRITTEN
-
@cnbgeren Your fog server has a staticly defined IP address right??
-
@george1421 said in how to setup FOG server on Isolated netowork:
@Wayne-Workman said in how to setup FOG server on Isolated netowork:
https://wiki.fogproject.org/wiki/index.php?title=ProxyDHCP_/dnsmasq-_DRAFT
Where is that post you crated that documented the fedora 23 install. You had a dnsmasq section there that was pretty darn good, short and clear. You could almost dump that section into the draft link from above.
It’s in the Fedora 21 Article. I suppose I can literally copy these optional steps to the CentOS and Fedora 23&24 articles, changing yum to dnf where needed.
-
-
@cnbgeren Yeah it looks like your dhcp server isn’t running.
Since it appears you have a unbuntu server you might want to review this document. https://help.ubuntu.com/community/isc-dhcp-server
