MultiCast

[Gary Kulovics]

When trying to multi-cast I get the following error
Everything loads perfect then I get to
Starting to restore image (-) to (/dev/sda1)
Then a cursor comes on just blinking and nothing happens after that
Have restarted the Multicastmanager but still nothing
Hope someone can help with this problem

Thanks
Gary

[Wayne Workman]

@Gary-Kulovics @cpattersonit

Sorry for not responding sooner.

Please turn off any firewall you have on the fog server (sudo ufw stop or systemctl stop firewalld) and try again. Clear the multicast tables per the troubleshooting guide and then restart FOGMulticastManager with either service restart FOGMulticastService or systemctl restart FOGMulticastManager and try again.

If you haven’t, please go through the troubleshooting guide posted earlier. If you’re still having problems, I can help around 4:30 PM CST via Team Viewer, please send me a message via the forums here.

[cpattersonit]

I am having the same problem on version 8609, running on Fedora 23 server.

[Gary Kulovics]

@Wayne-Workman Yes I did and still the same problem

https://forums.fogproject.org/uploads/files/1432805920932-multicast.png

and it still stops here

[Wayne Workman]

@Gary-Kulovics Did you do any troubleshooting from the link I posted?

[Gary Kulovics]

@Hanz
Hi Hanz
Am running
Version 8607
SVN Revision: 5908
Yes the Fog server is on the same switch as the 2 client PC
Also in the Fog Multicast logs it says that there is NO Task Running
but there is a atsk running so not sure what I am missing

[Gary Kulovics]

@Wayne-Workman 0_1468840958947_multicast.log
Hi Wayne
Attached is the file you asked for funny it says no task found but yet there is a task there What am I missing? There must be a setting I did not turn on or missed during setup

Thanks
Gary

[Hanz]

@Gary-Kulovics Just to clarify the same broadcast domain, the clients are behind the same router as the server itself. Also wondering what version you’re running…I’m currently running SVN 8525 and can verify that multicast is working with node at location and server behind different routers, but Ip forwarding has been setup to allow the multicast broadcast. So in short if they aren’t seperated by routers it should be working on 8525 at the least.

[Wayne Workman]

@Gary-Kulovics Ok then. We need to troubleshoot further.

We need the multicast logs, they are here:
Web Interface -> FOG Configuration -> Log Viewer -> Multicast log
They will have timestamps. If you can’t find the logs of the try, just try to multicast again and some logs should appear. Be sure to wait longer than the wait time you set. Then copy/paste to here please.

There’s a manual test that you can do relatively easily to test multicast functionality. It’s in this wiki article, along with other troubleshooting that you should read through:
https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_Downloading_-_Multicast

Also, what OS is fog running on?

[Gary Kulovics]

@Wayne-Workman said in MultiCast:

Is the FOG Server and the target hosts on the same broadcast domain?

Hello Wayne
Yes both Fog Server and host target are on the same domain
Before sending multicast did decrease the wait time to 3 minutes
Still getting the same result

[Wayne Workman]

There’s a multicast wait time defined in FOG Settings, I think the default is 10 minutes. That’s how long all hosts in the multicast task wait for all other hosts to be ready. You could just be seeing the wait time, or there could be a problem. Try waiting 10 minutes, or decreasing the wait time to something lower (like 2 minutes).

Is the FOG Server and the target hosts on the same broadcast domain?