ipxe login after upgrading to latest trunk + no such file or directory
-
Re: ipxe login loop after upgrading to latest trunk
The main menu still prompts for login. This install has been updated many times since an early 1.2 so I decided to start fresh. On the clean install, he main menu still prompts for login and the quick registration and imaging says “no such file or directory”. The advanced menu side works great. Is this problem in my database at that point? What info / logs can I look to diagnose?
-
@Tom-Elliott said in ipxe login after upgrading to latest trunk + no such file or directory:
Again? Anything to report for this?
I eventually went with a clean install of 14.04 and a new database and the problem went away. In that way it’s resolved on my end though I don’t know what was in my old database that could have caused this.
-
Again? Anything to report for this?
-
Any more information on this?
-
@Wayne-Workman said in [ipxe login after upgrading to latest trunk + no such file or directory](/topic/7763/ipxe-login-after-upgrading-
What boot file do you have set in DHCP?
subnet 172.16.0.0 netmask 255.255.255.0{
option subnet-mask 255.255.255.0;
range dynamic-bootp 172.16.0.10 172.16.0.254;
default-lease-time 21600;
max-lease-time 43200;
option routers 172.16.0.1;
option domain-name-servers 8.8.8.8;
next-server 172.16.0.33;
class “Legacy” {
match if substring(option vendor-class-identifier, 0, 20) = “PXEClient:Arch:00000”;
filename “undionly.kkpxe”;
}
class “UEFI-32-2” {
match if substring(option vendor-class-identifier, 0, 20) = “PXEClient:Arch:00002”;
filename “i386-efi/ipxe.efi”;
}
class “UEFI-32-1” {
match if substring(option vendor-class-identifier, 0, 20) = “PXEClient:Arch:00006”;
filename “i386-efi/ipxe.efi”;
}
class “UEFI-64-1” {
match if substring(option vendor-class-identifier, 0, 20) = “PXEClient:Arch:00007”;
filename “ipxe.efi”;
}
class “UEFI-64-2” {
match if substring(option vendor-class-identifier, 0, 20) = “PXEClient:Arch:00008”;
filename “ipxe.efi”;
}
class “UEFI-64-3” {
match if substring(option vendor-class-identifier, 0, 20) = “PXEClient:Arch:00009”;
filename “ipxe.efi”;
-
-
@Cavender Well the two are separate issues. However in another thread we may be onto something… Another person is having the same issue: https://forums.fogproject.org/topic/7774/default-ipxe/2
-
@Wayne-Workman said in ipxe login after upgrading to latest trunk + no such file or directory:
@Cavender Well if all that has been set and verified, then it should be fixed. If you can upload successfully, then it’s fixed.
That’s why I’m stumped. Registration / Imaging still says “no such file or directory” and I still get a login prompt for the main menu.
-
@Cavender Well if all that has been set and verified, then it should be fixed. If you can upload successfully, then it’s fixed.
-
@Wayne-Workman said in ipxe login after upgrading to latest trunk + no such file or directory:
@Cavender the ftp rename error would indicate most likely an FTP credentials issue. This article has everything you need to solve that: https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_FTP
I’ve gone through:
cat /etc/vsftpd.conf
sudo iptables -L
sudo passwd fog
/opt/fog/.fogsettings
Interface = eth0
FTP Path
Permissions - set to 777 for testing
Hide Menu is un-checkedAll looks good, though I know I’m completely missing something…just don’t currently see what it is.
-
@Wayne-Workman
Fog serves DHCP on a separate network
-
-
@Cavender It depends on what is doing DHCP. For windows, it’s just DHCP option 067.
-
@Wayne-Workman said in ipxe login after upgrading to latest trunk + no such file or directory:
What boot file do you have set in DHCP?
I’ll go through the article. Where do I look to see what boot file is set in DHCP?
-
@Cavender Can you please pull up the GUI->FOG Configuration Page->FOG Settings->TFTP Server
Please post a screenshot of the values there?
-
@Cavender the ftp rename error would indicate most likely an FTP credentials issue. This article has everything you need to solve that: https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_FTP
For this other error, well it’s really vague. Firstly, it would appear the background image is being loaded properly because it’s white.
What boot file do you have set in DHCP?
-
@Wayne-Workman
I do see:
PHP Warning: fopen(./languages/en_US/gpl-3.0.txt): failed to open stream: No such file or directory in /var/www/html/fog/lib/pages/fogconfigurationpage.class.php on line 58
and
PHP Warning: ftp_rename(): Rename failed. in /var/www/html/fog/lib/fog/fogftp.class.php on line 168
-
@Wayne-Workman
I’ve gone through:
cat /etc/vsftpd.conf
sudo iptables -L
sudo passwd fog
/opt/fog/.fogsettings
Interface = eth0
FTP Path
Permissions - set to 777 for testing
Hide Menu is un-checkedAll looks good, though I still am prompted for menu login and registration / image download says “no such file or directory”. I know I’m completely missing something…just don’t currently see what it is.
-
@Wayne-Workman
…a screen shot you can actually read…
-
@Wayne-Workman
…here’s the screen shot
