Fog Services Not working
Ubuntu 14.04 LTS
Windows 7 Pro 64-bit
Client 0.10.6 (MSI install not smart installer)
After imaging a machine, nothing happens, it doesn’t add to the domain, it doesn’t change to the appropriate host name either, I checked the log and there were a lot of errors.
Wayne Workman last edited by
@herrpommesfrite For most, 60 is fine. Especially with the improvements that FOG Client 0.10.x brought.
If you have less than 1,000 computers, 60 is probably fine. In excess of that I’d probably recommend 3 or 5 minutes. Esp. when you get to around 15,000.
@Wayne-Workman They are both set to 60. Is that an appropriate time?
Wayne Workman last edited by Wayne Workman
@herrpommesfrite check your checkin times and grace times for the client in
Web Interface -> FOG Configuration -> FOG Settings -> FOG Client.
Also, did you have to reset the encryption for the host? It’s possible that this was your hangup.
It’s also possible that the client updated itself - and it simply took a while.
well it took about 10 minutes but finally ended up going through