Fog Boot Menu only works once
-
Hi Tom,
sestatus:
SELinux status: enabled SELinuxfs mount: /sys/fs/selinux SELinux root directory: /etc/selinux Loaded policy name: targeted Current mode: permissive Mode from config file: permissive Policy MLS status: enabled Policy deny_unknown status: allowed Max kernel policy version: 28Output of iptables -L -n:
Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 INPUT_direct all -- 0.0.0.0/0 0.0.0.0/0 INPUT_ZONES_SOURCE all -- 0.0.0.0/0 0.0.0.0/0 INPUT_ZONES all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 FORWARD_direct all -- 0.0.0.0/0 0.0.0.0/0 FORWARD_IN_ZONES_SOURCE all -- 0.0.0.0/0 0.0.0.0/0 FORWARD_IN_ZONES all -- 0.0.0.0/0 0.0.0.0/0 FORWARD_OUT_ZONES_SOURCE all -- 0.0.0.0/0 0.0.0.0/0 FORWARD_OUT_ZONES all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination OUTPUT_direct all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD_IN_ZONES (1 references) target prot opt source destination FWDI_public all -- 0.0.0.0/0 0.0.0.0/0 [goto] FWDI_public all -- 0.0.0.0/0 0.0.0.0/0 [goto] Chain FORWARD_IN_ZONES_SOURCE (1 references) target prot opt source destination Chain FORWARD_OUT_ZONES (1 references) target prot opt source destination FWDO_public all -- 0.0.0.0/0 0.0.0.0/0 [goto] FWDO_public all -- 0.0.0.0/0 0.0.0.0/0 [goto] Chain FORWARD_OUT_ZONES_SOURCE (1 references) target prot opt source destination Chain FORWARD_direct (1 references) target prot opt source destination Chain FWDI_public (2 references) target prot opt source destination FWDI_public_log all -- 0.0.0.0/0 0.0.0.0/0 FWDI_public_deny all -- 0.0.0.0/0 0.0.0.0/0 FWDI_public_allow all -- 0.0.0.0/0 0.0.0.0/0 Chain FWDI_public_allow (1 references) target prot opt source destination Chain FWDI_public_deny (1 references) target prot opt source destination Chain FWDI_public_log (1 references) target prot opt source destination Chain FWDO_public (2 references) target prot opt source destination FWDO_public_log all -- 0.0.0.0/0 0.0.0.0/0 FWDO_public_deny all -- 0.0.0.0/0 0.0.0.0/0 FWDO_public_allow all -- 0.0.0.0/0 0.0.0.0/0 Chain FWDO_public_allow (1 references) target prot opt source destination Chain FWDO_public_deny (1 references) target prot opt source destination Chain FWDO_public_log (1 references) target prot opt source destination Chain INPUT_ZONES (1 references) target prot opt source destination IN_public all -- 0.0.0.0/0 0.0.0.0/0 [goto] IN_public all -- 0.0.0.0/0 0.0.0.0/0 [goto] Chain INPUT_ZONES_SOURCE (1 references) target prot opt source destination Chain INPUT_direct (1 references) target prot opt source destination Chain IN_public (2 references) target prot opt source destination IN_public_log all -- 0.0.0.0/0 0.0.0.0/0 IN_public_deny all -- 0.0.0.0/0 0.0.0.0/0 IN_public_allow all -- 0.0.0.0/0 0.0.0.0/0 Chain IN_public_allow (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 ctstate NEW ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 ctstate NEW ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:111 ctstate NEW ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:111 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20048 ctstate NEW ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:20048 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:2049 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 ctstate NEW ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 ctstate NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 ctstate NEW ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 ctstate NEW ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:69 ctstate NEW ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:4011 ctstate NEW Chain IN_public_deny (1 references) target prot opt source destination Chain IN_public_log (1 references) target prot opt source destination Chain OUTPUT_direct (1 references) target prot opt source destinationThanks,
Tom -
@TomBagley Considering you have to enter tftp server address, it is likely you have another DHCP server on your network (likely your modem), which might be interfering.
-
@Quazz said in Fog Boot Menu only works once:
@TomBagley Considering you have to enter tftp server address, it is likely you have another DHCP server on your network (likely your modem), which might be interfering.
I understand your thoughts Quazz and although I do have another DHCP server I wouldn’t have expected it to not work so consistently if that was the case. I’d expect intermittent issues rather than it always working the first time and not the second.
Tom
-
@TomBagley This will most likely be due to the dhcp leases that are handed out allowing the other DHCP server to reach it before FOG has a chance.
-
I understand your thoughts Quazz and although I do have another DHCP server I wouldn’t have expected it to not work so consistently if that was the case. I’d expect intermittent issues rather than it always working the first time and not the second.
Tom
Depends on your network setup. with IP Helpers - you wouldn’t notice any issues at all. If one DHCP server is set as authoritative and another is not, you wouldn’t notice any issues at all. And it too could be that the other DHCP server is just able to reply faster, consistently.
If two co-existing DHCP servers within the same broadcast domain are not properly configured to work with another present, it’ll only cause you issues.
-
@Quazz said in Fog Boot Menu only works once:
@TomBagley This will most likely be due to the dhcp leases that are handed out allowing the other DHCP server to reach it before FOG has a chance.
My networking manager has explained that the Fog Server and clients are on a Vlan completely separate from the rest of the network. Could this still be interfering?
Thanks Quazz,
Tom -
@TomBagley said in Fog Boot Menu only works once:
@Quazz said in Fog Boot Menu only works once:
@TomBagley This will most likely be due to the dhcp leases that are handed out allowing the other DHCP server to reach it before FOG has a chance.
My networking manager has explained that the Fog Server and clients are on a Vlan completely separate from the rest of the network. Could this still be interfering?
Thanks Quazz,
TomDepends on if the totally seperated vlan is being served DHCP or not.
-
@Wayne-Workman said in Fog Boot Menu only works once:
@TomBagley said in Fog Boot Menu only works once:
@Quazz said in Fog Boot Menu only works once:
@TomBagley This will most likely be due to the dhcp leases that are handed out allowing the other DHCP server to reach it before FOG has a chance.
My networking manager has explained that the Fog Server and clients are on a Vlan completely separate from the rest of the network. Could this still be interfering?
Thanks Quazz,
TomDepends on if the totally seperated vlan is being served DHCP or not.
Got you thanks all for the rapid response it is much appreciated. Going to turn the Fog off and see how the client behaves. Will let you know how I get on.
Tom
-
@TomBagley said in Fog Boot Menu only works once:
@Wayne-Workman said in Fog Boot Menu only works once:
@TomBagley said in Fog Boot Menu only works once:
@Quazz said in Fog Boot Menu only works once:
@TomBagley This will most likely be due to the dhcp leases that are handed out allowing the other DHCP server to reach it before FOG has a chance.
My networking manager has explained that the Fog Server and clients are on a Vlan completely separate from the rest of the network. Could this still be interfering?
Thanks Quazz,
TomDepends on if the totally seperated vlan is being served DHCP or not.
That’s done it - solved! Thank you ever so much! Time to slap my network manager for not blocking the DHCP
Have a nice evening guys.
Tom
-
@TomBagley You could ask him to modify it to support fog. We have very detailed guides in the wiki. Please pass these two links to your network manager:
https://wiki.fogproject.org/wiki/index.php?title=Modifying_existing_DHCP_server_to_work_with_FOG
https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence
-
@Quazz Kudos to you for knowing what the issue was.