Hostname changing and drive's letter after deployment
-
I’m using FOG 1.2.0 stable (by “fresh” I mean “new”. Sorry I still have to improve my english
).As described above, i’m on 1.2.0.
80% have: 1 disk with 2 partitions -
@george1421 @tom-elliott I stand corrected, thanks y’all. Not trying to hijack this, in the past we’ve used a manual PS+HTA script that allowed us to import them to a OU and rename them post-imaging.
-
@RLane No worries, all comments are welcome. That is the way we all collectively learn and grow. There are just different ways to go about doing the same thing.
The thing we need to keep in mind is the FOS (Fog Operating System) is based on linux and not Windows PE. So in a way we are restricted to only use linux available applications and with the same breath we are feed by being able to use some pretty powerful linux applications.
-
@Tom-Elliott said:
the Hostname_early fog setting item
I don’t find it on the web interface …
(Forgive me i am a beginner in the computer networking)
-
@Ph3noM said:
@Tom-Elliott said:
the Hostname_early fog setting item
I don’t find it on the web interface …
(Forgive me i am a beginner in the computer networking)
Web Interface -> FOG Configuration -> FOG Settings -> General Settings -> FOG_CHANGE_HOSTNAME_EARLY -
Oh, my bad, thanks Wayne!
And i’m still stuck for hostname changing, it doesn’t work and i don’t know what to do ^^
-
@Ph3noM What do you mean by “does not work”? Did you find the setting? Tried deploying the client again? Still the old hostname? Rebooted the client a couple of times?
-
@Sebastian-Roth
Hi Sebastian,Yes the FOG_CHANGE_HOSTNAME_EARLY option is active.
And I tried all, with Win xp and Win10.I think i’m going to bring myself to use the fog client. ^^
-
Anyone have an idea ?
-
@Ph3noM Please schedule a debug deploy task (normal deploy task but tick the option “Schedule task as a debug task”), start the machine up and wait till you get to the shell. Then start cloning (command
fog) and step through the tasking. When you get back to the shell run the following commands to see if the registry changes were done correctly - make sure to choose the correct windows (7/10 - won’t work for XP!) system partition for /dev/sdaX, e.g. /dev/sda2:shell> mkdir -p /ntfs shell> ntfs-3g -o force,rw /dev/sdaX /ntfs shell> reged -e /ntfs/Windows/System32/config/SYSTEM ... reged> cd ControlSet001\Services\Tcpip\Parameters reged> ls ... <Hostname> ... reged> cd ControlSet001\Control\ComputerName\ComputerName reged> ls ... <ComputerName> ... reged> q shell> umount /ntfsSee what you get for
<Hostname>and<ComputerName>…
