Was working prior to update, Image deployment

[EAHarvey]

So I have these asus netbooks that I got figured out with the help of this great community. They were imaging no issues until yesterday. I updated to the latest trunk as of about noon yesterday, after all the fixing that was done with the PHP issue. Now these laptops will not image.

Image failed to restore and exited with an exit code 0 (writeImage)

Any ideas?

[Sebastian Roth]

@EAHarvey This error is due to something that went wrong with partclone (the blue/grey screen) actually doing the copy work. Please try again and pay attention to any error you see in that screen. Best if you can take a picture or video when things go wrong.

[EAHarvey]

roger that.

[plegrand]

@Sebastian-Roth hello

I have the same problem today with dell optiplex 760 worstation
Partclone says :

Target partition size (xxx MB) is smaller than source xxx MB. 
Use option -C to disable size checking (Dangerous)

And just after

Image failed to restore and exited with exit code 0 (writeImage)

May be same problem ?

[EAHarvey]

[Tom Elliott]

@EAHarvey Yours looks like the image type is partimage, not partclone.

[EAHarvey]

@Tom-Elliott That is correct.
These are older images. But were working fine prior to yesterday. FOG strictly Partclone now?

[Tom Elliott]

@EAHarvey not that I’m aware of.

[EAHarvey]

@Tom-Elliott I didn’t think so. I wonder what has changed. Where could i look for that error log. in the FOG error_logs folder or a different location?

[Sebastian Roth]

@EAHarvey Maybe I am missing something here but I still cannot see the error that partclone is showing. It’s not on the picture you posted, is it?

@plegrand Please search the forums for “is smaller than source”. There are a lot of discussions on this. Usually comes from recovery partitions that come with vendor installations. Or do you see this error only after a FOG upgrade from yesterday just as the OP does??

Edit: Just remembered your other posts (https://forums.fogproject.org/topic/6620/fog-restore-only-one-partition). I am not sure if this is related to what EAHarvey is seeing.

[EAHarvey]

@plegrand Where do you get that error log grand? I need to look at mine too.

[EAHarvey]

@Sebastian-Roth Just started after yesterdays update. Nothing else has changed. I imaged these same laptops about a week ago.

[plegrand]

@Sebastian-Roth said:

@plegrand Please search the forums for “is smaller than source”. There are a lot of discussions on this. Usually comes from recovery partitions that come with vendor installations. Or do you see this error only after a FOG upgrade from yesterday just as the OP does??
I think you’re right about this because the problem come with dell workstation each time
and restauration partition

Edit: Just remembered your other posts (https://forums.fogproject.org/topic/6620/fog-restore-only-one-partition). I am not sure if this is related to what EAHarvey is seeing.
may be it’s not the same problem

then sorry for the noise !!

[Sebastian Roth]

@EAHarvey Don’t you see an error in the blue/gray partclone screen??

[Tom Elliott]

Can you please re-update and try again?

[EAHarvey]

@Tom-Elliott ok no problem. give me just a few.

[EAHarvey]

@Tom-Elliott same error.

[EAHarvey]

@Sebastian-Roth I believe the Partclose/Partimage screen flashes by so fast I’m probably not seeing it.

It just a quick flash.

[Sebastian Roth]

@EAHarvey Can you take a video of that? Possibly even slow motion (iPhones can do that)…

[EAHarvey]

@Sebastian-Roth let me try