Failure during image deployment.
-
Our Fog box has been working successfully since last summer. This morning I updated with SVN to version 6211, updated schema, and everything appeared to be fine. When I try to image computers however, I get an error that says “No osid passed. (restore partition tables and boot loaders)”. And the machine reboots. I’ve tried a couple of different laptops, but I get the same error. I would appreciate any help I can get.
-
What OS is the server running on? Also you say you updated to 6211, what version where you previously on, was it trunk or an older version?
If you went to trunk from .32 or .33 you may have to go assign the OS tot the image definitions, as they were assigned to the machine before. This maybe true for 1.x also, but I am not sure as I skipped that version in all of my deployments.
-
The server is running Fedora 21. I was previously using a trunk version of FOG.
-
@davisadamj01 try to flip the OS for the image to something else, save, and then back to the proper OS, then save again.
-
@Wayne-Workman I tried flipping the os on the image but it still gives my laptops the No osid passed
-
I’m seeing this same thing on 6211. I was already on trunk and updated today to 6211 and now I’m seeing this same thing. I have already tried changing the OS and changing it back with no luck.
Edit: I’m running Ubuntu server 14.04 as my OS.
-
@drc0nc @wyssaj01 Can you both post images of the error? Try to capture as much info as you can in the picture.
Also, a debug download is probably a good idea. You can step through each part of the deployment and have time to read the variable contents and any errors. pay special attention to the osid.
-
-
@drc0nc I just updated the inits, but svn appears to be screwed up for now :(. I’m waiting for a commit to happen. That said, a fix for the problem (No osid passed) as been pushed and should work. You don’t have to wait for the commit to go through to test, just rerun the installer and you should get the latest inits as well.
-
@Tom-Elliott Sourceforge is undergoing scheduled maintenance. Their site said 40 minutes.
-
@Tom-Elliott Thank you very much. testing now
-
I’m seeing the same error here at the bottom of the screen about No osid passed. I’ll test the fix and update shortly.
Mod edited.
-
@Tom-Elliott new issues with a deployment.
-
Imaging now works for me again. Thanks for the quick fix!
-
This post is deleted! -
Ran installer again and the problem is resolved. Thanks much for the quick fix.
-
@drc0nc How about you?
-
@Wayne-Workman passed the no osid. but I’m currently having issues with partitions. tom is currently helping me on it. still stuck on the performRestore.
-
@drc0nc Fixed through teamviewer YAY!.
I’ve released the code and updated the init’s
Please update and hopefully all these issues will now be fixed.
-
Hi,
I updated the version to 6237 and with images which have one disk, this version works fine but if the image has two disks, no.
The files in the server are:
