FOG Compatibility Test Failed

Tom Elliott

@techlover28 please use the file provided as is. I don’t know what is or isn’t included in all the comments and what not. The only guess I have is from the before commenting part in which I’m guessing you want fog to be the dhcp server?

techlover28

@Tom-Elliott said:

@techlover28 please use the file provided as is. I don’t know what is or isn’t included in all the comments and what not. The only guess I have is from the before commenting part in which I’m guessing you want fog to be the dhcp server?

Yes, I want fog to be dhcp.

I have attached the commented installfog.sh file (trunk). As the upgrade failed at the point where it was setting up DHCP, so just thought if commenting some part of script could avoid complete re-installation.

0_1454379388299_installfog.sh

techlover28

@Tom-Elliott I re-tried installing Trunk from scratch after removing-reinstalling DHCP and VSFTPD RPMs.

It got stuck at same place again (Setting up and starting DHCP Server…Failed!).

Attaching logs for reference. 1_1454387019861_foginstall.log 0_1454387019861_fog_error_6134.log

It is not able to start the DHCP service, therefore I manually configured it and re-executed the installfog.sh script. Script overwrites the configuration and fails.

My manual configuration which let DHCP service to start:

   subnet 192.168.1.0 netmask 255.255.255.0 {
   # option subnet-mask ;
    range dynamic-bootp 192.168.1.10 192.168.1.100;
    default-lease-time 21600;
    max-lease-time 43200;
    #       option domain-name-servers      x.x.x.x; 
    #       option routers      x.x.x.x;
    filename "undionly.kpxe";
    }

Script configuration which does NOT let DHCP service to start:

    subnet 0.0.0.0 netmask  {
    option subnet-mask ;
    range dynamic-bootp 0.0.0.253 192.168.1.254;
    default-lease-time 21600;
    max-lease-time 43200;
    #       option domain-name-servers      x.x.x.x; 
    #       option routers      x.x.x.x;
    filename "undionly.kpxe";
    }

Wayne Workman

@techlover28 I don’t think you have the latest version of trunk. The very, very latest has a more robust dhcp configuration.

And, in the script you posted, I think it fails to start because your interface IP address is not being detected correctly. The address and mask detected are what’s used to calculate the subnet address and start range, exactly the things that are not configured correctly here. Also the subnet-mask option is blank, which would be blank if the netmask couldn’t be calculated.

If you can post the output of ip addr I will try to come up with a more robust IP detection method that will hopefully solve your problem.

techlover28

@Wayne-Workman Thank you for your response.

I am using version 6134 (as written on a cloud on FOG management page). Please let me know where I can download latest Trunk.

Please find the output of said command below (I am using interface em2 for FOG/DHCP management):

  1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
    valid_lft forever preferred_lft forever
 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether f8:bc:12:3b:48:3c brd ff:ff:ff:ff:ff:ff
    inet 10.201.6.176/16 brd 10.201.255.255 scope global em1
    inet6 2001:ac9:101:3e9:fabc:12ff:fe3b:483c/64 scope global dynamic 
    valid_lft 2591952sec preferred_lft 604752sec
    inet6 fe80::fabc:12ff:fe3b:483c/64 scope link 
    valid_lft forever preferred_lft forever
3: em2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether f8:bc:12:3b:48:3d brd ff:ff:ff:ff:ff:ff
   ** inet 192.168.1.1/24 brd 192.168.1.255 scope global em2**
    inet6 fe80::fabc:12ff:fe3b:483d/64 scope link 
    valid_lft forever preferred_lft forever
4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether f8:bc:12:3b:48:3e brd ff:ff:ff:ff:ff:ff
5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether f8:bc:12:3b:48:3f brd ff:ff:ff:ff:ff:ff

Tom Elliott

@techlover28 we we ask you to upgrade we need you to update the sources as well. If you’re running svn trunk you cd to the trunk directory, for example /opt/svn/trunk then run

svn up
cd bin
./installfog.sh -y

If running git for example stored in /opt/fogproject you cd there and run

git pull
cd bin
./installfog.sh -y

techlover28

@Tom-Elliott I have done the “svn up”, below is the output:

# svn up
   A    .gitignore
   U    lib/common/functions.sh
   .
   .
   U    packages/web/lib/fog/group.class.php
   Updated to revision 4752.

But the install.sh script failed again at the same place (Setting up and starting DHCP Server…Failed!).

Wayne Workman

@techlover28 Ok so, you have many interfaces.

What network do you want FOG to serve DHCP to? The 192.168.1.0 network or the 10.201.0.0 network?

techlover28

@Wayne-Workman I am using interface em2 (192.168.1.0) for FOG/DHCP management.

Wayne Workman

@techlover28 So are you specifying the correct interface during the FOG installation? the em2 interface?

techlover28

@Wayne-Workman Yes, I am.


 * Here are the settings FOG will use:
 * Base Linux: Redhat
 * Detected Linux Distribution: CentOS
 * Server IP Address: 192.168.1.1
 * Interface: em2
 * Installation Type: Normal Server
 * Donate: 0
 * Internationalization: 0
 * Image Storage Location: /images
 * Using FOG DHCP: Yes
 * DHCP router Address: 
 * DHCP DNS Address:

Wayne Workman

I’ve forked the fogproject and added auxiliary code in case the IP or Subnet mask is missing - to hopefully solve your issue.

If you know how to use git, the project is here: https://github.com/wayneworkman/fogproject

Report back with your findings please, if it works we need to merge it to the main repo.

techlover28

@Wayne-Workman I had installed FOG 1.2.0 earlier. It worked fine with DHCP. I observed the issue during upgrade to Trunk (I attempted to upgrade because I was facing issue with the RAID disk and Trunk has RAID drivers included).

If you know how to use git, the project is here: https://github.com/wayneworkman/fogproject

This link appears to be pointing to the download of Fog 1.2.0. Is it the updated version including RAID drivers?

Wayne Workman

@techlover28 It’s not pointing to 1.2.0.

Wayne Workman

@techlover28 Please update and try again, the changes I’ve made have been merged. Maybe it’s fixed now?

techlover28

@Wayne-Workman Sorry I should have downloaded and installed it instead of just looking at the text. I have downloaded it and trying to install it now.

I am getting an error:

Setting up and starting DHCP Server…/lib/common/functions.sh: line 1705: 255.255.255.0: command not found
Failed!

I think it should be something to do with GIT.

techlover28

I am trying to make an understanding with GIT and going to try again installing version 6181 after setting GIT up.

Sebastian Roth

@techlover28 No I think there is a fix needed that @Wayne-Workman can shoot up pretty soon!

In line 1705 instead of:

            [[ -z $submask ]] && $( cidr2mask $(getCidr $interface))

should be (I reckon):

            [[ -z $submask ]] && $submask=$( cidr2mask $(getCidr $interface))

You can edit this in your local files and test till you hear from Wayne.

techlover28

@Sebastian-Roth I have edited functions.sh file - replaced 1705 line.

I am facing the same issue again.

Setting up and starting DHCP Server…/lib/common/functions.sh: line 1705: =255.255.255.0: command not found
Failed!

Sebastian Roth

Sorry! Should be (remove $

            [[ -z $submask ]] && submask=$( cidr2mask $(getCidr $interface))

@george1421 You are absolutely right about people need to get enough sleep!

FOG Compatibility Test Failed

187

11.6k

17.1k

154.6k