PXE Boot HP X2 210 (Hybrid tablet Windows 10 Pro)

[Tom Elliott]

@george1421 As it’s not getting that far in, I think it’s driver related on the iPXE side.

Maybe, try the intel/realtek.efi files?

[Sebastian Roth]

@Tom-Elliott Maybe I am wrong but I think George is right about Matthieu’s request. Sounds like iPXE is working fine (using ipxe.efi/snp.efi) as it comes up with the menu.

Any option I choose, screen stay black after loading file bzimage and initzx …

Black screen after loading the kernel. It could still be related on how iPXE is loading the kernel on those devices but we don’t know yet I reckon.

[Tom Elliott]

@Sebastian-Roth The only other time I have seen the black, is the files are html files, not actually downloaded files (bzImage/inits).

[Matthieu Jacquart]

@Tom-Elliott I’ve just tried intel and realtek.efi,

DHCP failed...

First time (in my original post) I tried ipxe, snp and snponly.efi, and always black screen after bzimage and init.xz…

[Sebastian Roth]

@Tom-Elliott Hmm, but I guess Matthieu’s setup is working for other devices, right?

@Matthieu-Jacquart As you are using FOG trunk (signature), can you please try to increase kernel loglevel and enable debug. You can find those settings in FOG configuration in the web GUI. Maybe we see some more info then.
As well I really like George’s idea to boot any kind of live Linux from an USB thumb drive to see if you can get Linux up at all.

[Tom Elliott]

@Sebastian-Roth I’m still under the impression it’s related to the files not having the right content, but I could be wrong. It happens a TON!

[Matthieu Jacquart]

@george1421
@Sebastian-Roth
I increase FOG_KERNEL_LOGLEVEL to 7 and activate FOG_KERNEL_DEBUG, which log can I look at after ?

I can boot on ubuntu live USB, it works perfectly

[george1421]

@Matthieu-Jacquart My intent was to not send you in 20 directions all at once. But since a live boot works, once you get the debugging information for the devs, it would be interesting to know what the output of lsblk and lspci -m are.

[Tom Elliott]

How about we get:

ls -lart /var/www/fog/service/ipxe/{bzImage{,32},init{,_32}.xz}

First.

I’m still guessing these files didn’t download properly last time.

[Sebastian Roth]

@Matthieu-Jacquart There is no log file. You will see more output on the screen when your tablet boots up - if so. But maybe you won’t see any more information. Can you boot other clients properly? Just asking to make sure your kernel/inits are fine.

[Matthieu Jacquart]

@Tom Elliott
ls -lart /var/www/fog/service/ipxe/{bzImage{,32},init{,_32}.xz} on fog server give me

root@FOG:~$ ls -lart /var/www/fog/service/ipxe/{bzImage{,32},init{,_32}.xz}
-rw-r--r-- 1 fog www-data 16476332 janv. 21 08:22 /var/www/fog/service/ipxe/init.xz
-rw-r--r-- 1 fog www-data 15448272 janv. 21 08:23 /var/www/fog/service/ipxe/init_32.xz
-rw-r--r-- 1 fog www-data  6847456 janv. 21 08:23 /var/www/fog/service/ipxe/bzImage
-rw-r--r-- 1 fog www-data  6759504 janv. 21 08:23 /var/www/fog/service/ipxe/bzImage32

@Sebastian-Roth Yes other client works perfectly, I deploy image yesterday and no problem. I didn’t see more output when I tried to boot on tablet

@george1421 Ok I’ll give you the result of command on Monday, for now I’m at home

[Tom Elliott]

At least now I know it’s not bad downloaded files and what not.

[Wayne Workman]

@george1421 said:

@Matthieu-Jacquart My intent was to not send you in 20 directions all at once. But since a live boot works, once you get the debugging information for the devs, it would be interesting to know what the output of lsblk and lspci -m are.

I’ll reiterate this. This is easy to get and important to know.

[Sebastian Roth]

@Matthieu-Jacquart Hope we’re not asking too many things here from you. But would it be possible to take a short video of the whole bootup process. Sometimes there are small hints that we only see if we have it right in front of our eyes…

[george1421]

@george1421 said:

… it would be interesting to know what the output of lsblk and lspci -m are.

Thinking about this a bit more, it would also be interesting to know what modules are loaded by what kernel modules were loaded by the live boot OS. You would use lsmod and probably direct the output into a file.

[Matthieu Jacquart]

Ok guys, I’ll give you this on monday
I hop to find a solution, It seems so close to boot properly on fog server !

[Matthieu Jacquart]

@Tom-Elliott @Wayne-Workman @george1421 @Sebastian-Roth

OK, let’s go : Video link (really sorry for quality !!!) : https://youtu.be/ob_5qC7KRqs

For test with (Ubuntu 14.04 LTS Live) : something strange, in file explorer ubuntu just see it’s own file system and USB key, but not internal HDD (windows 10 partitions). If I use live USB key on another computer with SSD, Ubuntu displays Windows partitions (Windows 7)

ubuntu@ubuntu:~$ lsblk 
NAME		MAJ:MIN	RM	SIZE		RO	TYPE	MOUNTPOINT 
sda			8:0    	1   	7.4G  	0 	disk 
└─sda1 		8:1    	1   	7.4G  	0 	part 		/cdrom 
sdb			8:16   	1   	7.4G  	0 	disk 
└─sdb1		8:17   	1   	7.4G  	0 	part          /media/ubuntu/54BF-F230 
loop0		7:0    	0 	962.1M  	1 	loop 		/rofs 
mmcblk0rpmb  	179:24   	0    	4M  		0 	disk 
mmcblk0boot0 	179:8    	0     	4M  		1 	disk 
mmcblk0boot1 	179:16   	0     	4M  		1 	disk 
mmcblk0      	179:0    	0  	58.2G  	0 	disk 
├─mmcblk0p1  179:1    	0   	260M  	0 	part 
├─mmcblk0p2  179:2    	0   	128M  	0 	part 
├─mmcblk0p3  179:3    	0  	57.1G  	0	part 
└─mmcblk0p4  179:4    	0   	746M  	0 	part 

ubuntu@ubuntu:~$ lspci -m 
00:00.0 "Host bridge" "Intel Corporation" "Device 2280" -r22 "Hewlett-Packard Company" "Device 8173" 
00:02.0 "VGA compatible controller" "Intel Corporation" "Device 22b0" -r22 "Hewlett-Packard Company" "Device 8173" 
00:03.0 "Multimedia controller" "Intel Corporation" "Device 22b8" -r22 "Hewlett-Packard Company" "Device 8173" 
00:0a.0 "Non-VGA unclassified device" "Intel Corporation" "Device 22d8" -r22 "Hewlett-Packard Company" "Device 8173" 
00:0b.0 "Signal processing controller" "Intel Corporation" "Device 22dc" -r22 "Unknown vendor 7270" "Device 8086" 
00:14.0 "USB controller" "Intel Corporation" "Device 22b5" -r22 -p30 "Hewlett-Packard Company" "Device 8173" 
00:1a.0 "Encryption controller" "Intel Corporation" "Device 2298" -r22 "Hewlett-Packard Company" "Device 8173" 
00:1c.0 "PCI bridge" "Intel Corporation" "Device 22c8" -r22 "" "" 
00:1f.0 "ISA bridge" "Intel Corporation" "Device 229c" -r22 "Hewlett-Packard Company" "Device 8173" 
01:00.0 "Network controller" "Intel Corporation" "Device 3165" -r81 "Intel Corporation" "Device 4010" 

ubuntu@ubuntu:~$ lsmod 
Module                  Size  Used by 
dm_crypt               24576  0 
intel_rapl             20480  0 
intel_powerclamp       20480  0 
coretemp               16384  0 
hp_wmi                 16384  0 
sparse_keymap          16384  1 hp_wmi 
kvm                   479232  0 
crct10dif_pclmul       16384  0 
crc32_pclmul           16384  0 
ghash_clmulni_intel    16384  0 
aesni_intel           172032  0 
aes_x86_64             20480  1 aesni_intel 
lrw                    16384  1 aesni_intel 
gf128mul               16384  1 lrw 
glue_helper            16384  1 aesni_intel 
ablk_helper            16384  1 aesni_intel 
cryptd                 20480  3 ghash_clmulni_intel,aesni_intel,ablk_helper 
iwlwifi               188416  0 
joydev                 20480  0 
cfg80211              524288  1 iwlwifi 
snd_intel_sst_acpi     16384  0 
snd_soc_rt5670        106496  0 
dm_multipath           24576  0 
snd_intel_sst_core     73728  1 snd_intel_sst_acpi 
snd_soc_rt5640         94208  0 
snd_soc_sst_mfld_platform    77824  1 snd_intel_sst_core 
snd_soc_rl6231         16384  2 snd_soc_rt5640,snd_soc_rt5670 
scsi_dh                16384  1 dm_multipath 
snd_soc_core          196608  3 snd_soc_rt5640,snd_soc_rt5670,snd_soc_sst_mfld_platform 
lpc_ich                24576  0 
snd_compress           20480  1 snd_soc_core 
snd_pcm_dmaengine      16384  1 snd_soc_core 
i915_bpo             1130496  3 
btusb                  40960  0 
i2c_hid                20480  0 
snd_pcm               106496  5 snd_soc_rt5640,snd_soc_rt5670,snd_soc_core,snd_soc_sst_mfld_platform,snd_pcm_dmaengine 
snd_seq_midi           16384  0 
snd_seq_midi_event     16384  1 snd_seq_midi 
mei_txe                20480  0 
mei                    90112  1 mei_txe 
snd_rawmidi            32768  1 snd_seq_midi 
shpchp                 40960  0 
snd_seq                65536  2 snd_seq_midi_event,snd_seq_midi 
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi 
snd_timer              32768  2 snd_pcm,snd_seq 
intel_ips              20480  1 i915_bpo 
drm_kms_helper        126976  1 i915_bpo 
snd                    86016  8 snd_soc_core,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_soc_sst_mfld_platform,snd_seq_device,snd_compress 
drm                   344064  5 i915_bpo,drm_kms_helper 
dw_dmac                16384  0 
8250_fintek            16384  0 
soc_button_array       16384  0 
pwm_lpss_platform      16384  0 
soundcore              16384  1 snd 
dw_dmac_core           24576  1 dw_dmac 
i2c_designware_platform    16384  0 
int3400_thermal        16384  0 
rfkill_gpio            16384  0 
bnep                   20480  2 
i2c_algo_bit           16384  1 i915_bpo 
rfcomm                 69632  8 
spi_pxa2xx_platform    24576  0 
pwm_lpss               16384  1 pwm_lpss_platform 
i2c_designware_core    16384  1 i2c_designware_platform 
8250_dw                16384  0 
int3403_thermal        16384  0 
acpi_thermal_rel       16384  1 int3400_thermal 
processor_thermal_device    16384  0 
iosf_mbi               16384  1 intel_rapl 
bluetooth             491520  22 bnep,btusb,rfcomm 
parport_pc             32768  0 
mac_hid                16384  0 
pinctrl_cherryview     32768  2 
acpi_pad               20480  0 
ppdev                  20480  0 
lp                     20480  0 
parport                45056  3 lp,ppdev,parport_pc 
squashfs               49152  1 
overlay                45056  1 
nls_iso8859_1          16384  2 
dm_mirror              24576  0 
dm_region_hash         24576  1 dm_mirror 
dm_log                 20480  2 dm_region_hash,dm_mirror 
uas                    24576  0 
usb_storage            69632  3 uas 
hid_generic            16384  0 
usbhid                 53248  0 
hid                   110592  3 i2c_hid,hid_generic,usbhid 
mmc_block              36864  0 
video                  20480  1 i915_bpo 
wmi                    20480  1 hp_wmi 
sdhci_acpi             16384  0 
sdhci                  45056  1 sdhci_acpi 

[george1421]

While I’m not sure what this means at this moment, this disk structure does look interesting. Unless I’m reading this wrong (likely) it appears you have 2 or 3 hard drives in this device.

mmcblk0rpmb     179:24      0       4M          0   disk 
mmcblk0boot0    179:8       0       4M          1   disk 
mmcblk0boot1    179:16      0       4M          1   disk 
mmcblk0         179:0       0   58.2G   0   disk 
├─mmcblk0p1  179:1      0       260M    0   part 
├─mmcblk0p2  179:2      0       128M    0   part 
├─mmcblk0p3  179:3      0   57.1G   0   part 
└─mmcblk0p4  179:4      0       746M    0   part 

[Matthieu Jacquart]

mmcblk0 seems to be internal SSD with the different Windows 10 partitions, and sda1 / sdb1 were 2 USB keys

[george1421]

Where I’m confused is this.

I understand that mmcblk0 is a physical disk and it has 4 partitions. I’m good with that. But the concern (in my mind) is what is mmcblk0rpmb, mmcblk0boot0, mmcblk0boot1 which also appear to be disks and how will fog deal with them. I might suspect that mmcblk0rpmb is the firmware of this device, and then there are two disks for the boot code, maybe a primary and a backup (??) But that is only a guess.

The question would be will this confuse the fog boot kernel? I guess we will need the fog devs to answer on that one.