Fog 1.20 as 0.32
-
I would gladly update to 1.20 but the “quick image/host registration bypass” keeps me from doing it. I really need that option because the install process has to be fast (we do “on the spot” installations), we have 9 different windows images from 9 to 27 gigs , and registering every single client ain’t an option.
Is tweaking 1.20 (to make “quick image” available) hard? and i forgot to mention the 128 disks are SSD.
-
This post is deleted! -
One thing we found is that the default compression for image capture and deploy on the older versions of FOG is level 9 (high compression) Under 1.2.0 (trunk build) is 6 (faster decompression but larger image size on FOG disk).
I did tweak the fog boot menu for fog 1.2.0. My tweak added the pxe menu entry but selecting the quick image just causes the pxe menu to reboot. So no joy for my hacking skills.
-
@mitzayapa said:
I would gladly update to 1.20 but the “quick image/host registration bypass” keeps me from doing it. I really need that option because the install process has to be fast (we do “on the spot” installations), we have 9 different windows images from 9 to 27 gigs , and registering every single client ain’t an option.
I have 22 images, all are 40 to 50 GB. I have 500 hosts in my building - they are all registered.
Some of the FOG users here have 6,000 hosts.
I think you are mistaking that this registration needs to happen all at once. it does not. Register as you image.
I also image “on the spot” - and a registered client in FOG Trunk will be done far before an unregistered one.
Automatic naming
Automatic domain joining
Automatic Windows Activation
Automatic printer deploymentJust imaging a 45GB image on Trunk takes 5 minutes, the booting and rebooting and activation maybe 2 minutes.
Can you beat that, doing it all manually? I really doubt it.
You need to try out FOG’s features. They will SPOIL you Rotten, I tell you!
I can image 30 PCs at once and just walk away and not worry about it. I’ll come back later and their all imaged, named, on the domain and ready to rock and roll.
My next goal for this summer is 500 computers in a day - using a combination of unicasting and multicasting.
-
I don’t mean to come off harsh. but the way you put it makes how FOG is designed to work unacceptable or worse than doing it manually. I assure you this is not the case.
If you’re a used computer distributer and just want to stick a quick image onto computers for resale or shipment, then quick image is the best choice. You can do this in 1.2.0 using the Capone plugin, FYI. But you won’t see the massive speed increases that FOG Trunk has to offer.
If you support a set of computers through their life cycle - you should be registering computers.
And depending on how you are using FOG (virtualized, isolated, or bare metal) - then Trunk just might be good for you.
-
I’ve decided to go on with the trunk version , had some issues at first but now its installed and i’m now uploading all images i have and recreate the ones that were old. I’ve bonded 2 nics and now i wonder , do i have to configure fog to work with bond or just install fog with the bond0 when asked.
Olso i would like to ask you guys , maybe some of u knows how to do it, how to add an entry to boot “system restore” by command (like in setupcomplete.cmd) cuz i set it up with easybcd in sysprep , but each time i install windows it goes away. (recovery partition has an extracted windows iso and easybcd points to boot.wim).
-
@mitzayapa Our init’s come with a generalized BCD file in the case of “resizable” which is likely overwriting your customized BCD file.
I think we can correct this on your init’s so long as your BCD’s are setup in a generalized state.
-
@mitzayapa As to the nic bonding question. If you are doing a unicast deployment between a single target computer and the FOG server bonding will not add any value. The data is not multiplexed across the members of the bond/lag, so once a network link is selected the conversation between the FOG server and target computer will remain on that selected network link.
Where bonding/lags help if you are doing a unicast deployment to multiple targets at the same time. Think of a bonded/lag connection as a highway. You can add more lanes to carry more traffic, but you still can go only the posted speed limit and you must remain in your lane once the lane is selected.
In regards to your question about telling FOG to use the bond. The nic bonding is setup at OSI layer 2 so the bond is transparent to FOG and to a certain extent the OS too. So there is nothing to do in this regards.
-
First of all: Happy New Year guys
, now i have a problem you guys might give me a hint how to solve.I´m now testing trunk version , 5704 , every i want to image a client , i choose the image through quick image , select the image , then it gives me a black screen and freezes.This has to do with an external router that i have , because if i disable dhcp on that router works like charm.
The thing is i need that routers dhcp enabled, please point me in the right direction how to solve this.
thank you in advance
-
Please start a new thread since your issue will get lost in this thread’s title.
But it sounds like you have two dhcp servers running in your environment.
