How to remove login and password in Quick imaging

[Robx64]

Hi Guys, I was searching for working solution how to remove login and password from Quick imaging menu but so far I couldn’t find any. Would you help me with it please ?

Problem solved

[Quazz]

@Tom-Elliott said:

@Robx64 First update to the latest then you will need to edit the quick image menu item from the GUI.

This is the original information

login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme

Make it read as:

params
param mac0 ${net0/mac}
param arch ${arch}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme

[Robx64]

@Quazz said:

login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme

What I suppose to do with it ?
Just copy and paste it into the window ?

[Robx64]

@Quazz
My Version is: 5475
There is no option to edit, however when I pointing at fog.quickmeny it seems to be a link so I copied it, pasted into the browser and it opens the window but immediately closing it again. I managed to stop it and now I can see it but what I suppooste to change inside the code ?

[ch3i]

@Robx64 I think it’s a bug. You have the latest version of FOG dev ?

Edit : no it’s not the latest version lol.
Please update to latest SVN that problem is solved.

[Robx64]

@Robx64
I did not said this is the latest version
I’ll update it but meantime I found another big problem:
While I’m tryiung to statr imaging getting error:
Veryfyinf network interface configuration … Failed
No network interface found (Dell Precision 390)
Any suggestions ?

[Tom Elliott]

What network is in the system?

[Robx64]

@Tom-Elliott
What do you mean What network ?
Other machines works fine, just this one

[Tom Elliott]

What network is on the system? What is the manufacture? Is there a network card on the system? Do you have other systems of the same model that aren’t having the same problem?

[Robx64]

@Tom-Elliott
I already tested multiple network cards on this system and still the
same problem

[Tom Elliott]

Can you answer my question?

What network card is on that system?

[Robx64]

@Tom-Elliott
Tested on builtin Intel, external PCI Braodcom, External Intel PCie.
Meantime upgraded to the latest (5566) so what i suppose to do now to remove the password and login ?

[Tom Elliott]

I’m so confused.

What?

Didn’t you open another thread about this and I gave (I thought) pretty direct information.

Yes, you copy the :make it read as: section into the quickimage.

[Robx64]

@Tom-Elliott
Sorry for the mess
Yes I already did this and now I’m waiting to check is it working or not

Regarding the network cards, as I said, tested on many different cards and there is the same problem with the other cards as well.
So i tried Dell 390 on old (fog_0.32) and guess what … it takes about 20 sec until it start imaging so … maybe I should change some timings in new fog but which ones ?

[Robx64]

@Tom-Elliott said:

What network is on the system? What is the manufacture? Is there a network card on the system? Do you have other systems of the same model that aren’t having the same problem?
I just checked it, inside the machine is intel nh82801gr

[Robx64]

@Tom-Elliott
Problem sorted, now I don’t have to type in login and password anymore
Thank you guys

[Tom Elliott]

Now can you create a thread about the NIC problems?

[Robx64]

@Tom-Elliott
Apparently this problem is solved as well, right after I upgraded FOG to the most current version it seems to work so If I spot any problems I’ll do
Thank you Tom for your help.