Surface 3 Fails to Image

[wwarsin]

@Sebastian-Roth I downloaded the bzimage you linked to and replaced the one /var/www/fog/service/ipxe and booted to

Here are the results of the two commands:

[root@fogclient /]# ls -al /sys/class/net/eth0/device/driver/module
ls: cannot access /sys/class/net/eth0/device/driver/module: No such file or directory
[root@fogclient /]# cd /sys/class/net
[root@fogclient /]# ls
lo@
[root@fogclient /]# dmesg | grep 8152
[    1.070704] usbcore: registered new interface driver r0152
[root@fogclient /]#

[Sebastian Roth]

@wwarsin Thanks for trying and reporting. Does not look very good to me. But as I can see in one of your earlier posts it has kind of worked (at least not “No such file or directory”) in the past. What messages did you see this time when booting up into debug mode??

[Sebastian Roth]

@wwarsin I am wondering if the device is actually recognized. Could you please boot the device into debug mode. When you see the shell unplug the USB NIC. Wait for a few seconds and plug it back in. Then run dmesg | tail -n 20. Would be great if you could take a picture of what you see on the screen. Hopefully we might see something similar to this: https://bugzilla.redhat.com/show_bug.cgi?id=1236679 (we don’t have the same issue in FOG, just posting this to show what the output might look like).

I stumbled upon a newer driver (kernel source code) on realtek.com.tw. Version 2.05.0 (2015/8/13) instead of the 1.08.2 (2014) included in kernel 4.3.3. Will try to build a kernel with that realtek code.

Edit (read this first): I just remembered that I only added ID 045e:07ab (Microsoft Model 1552) to the kernel I compiled last because this was the device you reported using at first. So this means that using my kernel (the one I compiled 10 days ago) would not work with Microsoft Model 1663 (045e:07c6). I compiled two new kernel images that you can find here: https://drive.google.com/folderview?id=0B-bOeHjoUmyMV095YVpsR3U5VFk&usp=sharing
Both added with the Microsoft device IDs for 1552 AND 1663! bzImage.vanilla is a plain kernel and bzImage.realtek I compiled with the earlier mentioned driver code from the realtek website. Try vanilla first as I hope that we don’t need the newest realtek driver. Again, boot into debug mode and try the commands. As well try re-plugging the device to see if it is recognized (see dmesg | tail -n 20).

[wwarsin]

@Sebastian-Roth Hi Sebastian, I will try to get this to you next week or the week after due to the Holidays…

Have a great Christmas and New Years!

[wwarsin]

@Sebastian-Roth I just tested with the vanilla bzimage and in debug mode the network works! However when i tried to capture an image the network fails and reports

I upgraded to SVN 5798 and am still using the Microsoft Model 1663 network adapter.

Edit:
I seem to be getting mixed results now… I created the capture task and it first booted to the no network screen. Then it booted to the white FOG splashscreen and another attempt looked like it loaded correctly to start capturing the image however the screen went by so fast that i couldn’t catch any errors (the surface just restarted)

[Sebastian Roth]

@wwarsin said:

I upgraded to SVN 5798 and am still using the Microsoft Model 1663 network adapter.

Whenever you upgrade you are using the current official FOG trunk kernel which does not have the patch included (to add the mentioned IDs).

Probably good if you can take a video of the screen so we might have a chance to see if there is an error and when exactly things go wrong. As I don’t have a surface device I need your assistance to figure this out. But it looks like we are making progress. At least we seam to have networking up again - maybe only part of the time, not sure why?!

[wwarsin]

@Sebastian-Roth I assume bzimage is the kernel? I downloaded this file after I upgraded to the newest SVN - I’ll hold off on upgraded fog until this is resolved.

I’m out the rest of this week (food poisoning ) but will take a video of the surface next week.

[Sebastian Roth]

@wwarsin Sorry for my late reply. Have been without internet for some days. Hope you are better again!

Yes, bzImage is the kernel. Re-download and put in correct path (/var/www …) if you have upgraded. But there shouldn’t be a need to upgrade right now if you don’t see other issues. Probably best if you don’t to hopefully have more stable test results.

Looking forward to the video.

[wwarsin]

@Sebastian-Roth

I’m finally back in the office for a few days! Here’s the video: https://youtu.be/UFYNan98lmw This is with the Vanilla bzimage.

[Sebastian Roth]

@wwarsin Looking at the last few lines of output it seams a bit like FOG doesn’t find any partitions on your device. It says “Saving Partition Tables (GTP)” and then “Task complete” straight way.
Can you please run a debug session on the surface and see what you get from lsblk

[wwarsin]

@Sebastian-Roth

Here’s a picture of the command;

I have in “/dev/mmcblk0” in Host Primary Disk

[Sebastian Roth]

@wwarsin I am really sorry that it seams like we have just been turning in circles! But I might have an idea of what is wrong here now. Spent a long time closely looking at the pictures and videos you posted and I might have found something.

Picture and video show version 5798 (FOG boot logo message) which FOG polls from the server. But later on it says “Re-reading Partition Tables”. As far as I could find out in the code repository this string was changed in version 5752. So I am pretty sure you have version 5798 installed on the server but your init files did not get updated on the last upgrade - so the clients booting up use an older version.

Please try this on your FOG server (as root!):

cd /var/www/fog/service/ipxe
mv init.xz init.xz_old
wget https://fogproject.org/inits/init.xz
chown www-data:www-data init.xz

Then try booting your surface again. Hopefully this will make a difference!

Tom has changed the disk/partition enumeration from lsblk to fdisk lately. So I am really keen to see if this is working on your device out of the box. Looking forward to hearing from you!

[wwarsin]

@Sebastian-Roth

Success! It’s capturing the image now!

I’ll write back a little later, i’m going to try a deploy after this finishes to verify it works completely.

I appreciate all of the help you and Tom have been!

[wwarsin]

@Sebastian-Roth
So close! Now i’m getting the following error when i try to deploy:

Checking write caching status on HDD…Failed

Could not set caching status (enableWriteCache)

Edit: I still have “/dev/mmcblk0” set as the Host Primary Disk

[Wayne Workman]

@Tom-Elliott I think center alignment of those pieces in that picture below don’t look very good. I suggest making only the initial logo/credits box be centered, and everything else left aligned.

[Sebastian Roth]

@wwarsin Great! Can you please run another debug session and let us know what you get from hdparm -i /dev/mmcblk0

Yeah, pretty close we are indeed!

[wwarsin]

@Sebastian-Roth

Here’s the output of the command:

# hdparm -i /dev/mmcblk0

/dev/mmcblk0:
 HDIO_DRIVE_CMD(identify) failed: Invalid argument
 HDIO_Get_IDENTITY failed: Invalid argument
#

[wwarsin]

@Sebastian-Roth Any updates by chance?

[Wayne Workman]

@wwarsin Interestingly we got fog 1.2.0 to image a Surface 3 the other day. I couldn’t understand why trunk wouldn’t work

Have you updated recently and tried again?

[Sebastian Roth]

@wwarsin Thanks for reminding me on this! Can you please go for another debug session and run hdparm with a different parameter to see how this behaves: hdparm -W /dev/mmcblk0