Debian 8, Fog trunk, PXELinux on MS Server and MS DHCP help
-
Do I understand that you want to remove most of the standard FOG menu items except for a select few?
That’s exactly what I want… My use of FOG is just as that minimal and I don’t want users to get confused.
… I want to run my .ISO file directly from the first menu, I was succesfully start it from the Advanced menu for now, but I don’t know how to link it to first list below default choice . -
@jukka2015 Ok then, my first recommendation is for you to start a new thread so this one doesn’t get polluted with off topic discussions. Then we can focus on your specific needs.
-
@george1421 said:
Bingo, I have it.
I have two ways to boot a MDT litetouch image via FOG.
-
The first way is how I stated to take the iso image created by MDT and move that to your FOG server (on rhel variants) in /var/www/html/iso folder. The file I used was to move LiteTouchPE_x86.iso from the MDT deployment share to that …/iso folder as ltpe_x86.iso. Then to create the PXE boot menu as I outlined below. The freeze issue I had was related to how I created the VM. I created it as a linux VM not a windows VM (shame on me). Once I reset it to a windows 7 VM the system booted to the lite touch menu.
-
By using instructions found in Wayne’s link below. http://ipxe.org/howto/winpe I used this as the bases of option 2. I’ve created WinPE USB boot drives so I already had WAIK installed and already had a boot.wim created, so I’m not going into that part. But in the target winpe environement I took the ISO folder and moved it to the fog server in /var/www/html/ISO (which is different than the <lowercase> iso folder from option 1). I placed the wimboot file (downloaded from the link provided by Wayne) in the web root folder /var/www/html. Then copied the LiteTouchPE_x86.wim from MDT deployment share to /var/www/html/ISO as boot.wim. And finally created the FOG PXE menu with these settings.
Menu Item: winpe.BootMDT_x86
Description: Boot MDT LiteTouch x86
Parameters:
kernel http://<fog_server_ip>/wimboot
initrd http://<fog_server_ip>/ISO/boot/bcd BCD
initrd http://<fog_server_ip>/ISO/boot/boot.sdi boot.sdi
initrd -n boot.wim http://<fog_server_ip>/ISO/boot.wim boot.wim
boot
I still would like to understand how I can use the variables to the fog server IP address so I don’t have to hard code the IP address into the boot menu. That would make the instructions a bit more dynamic.
Understand what I’ve done is a first pass attempt to make FOG deploy both FOG images and to launch MDT’s litetouch image without the need of a WDS server (which would have made things a bit easier in one respect)
Is it important to actually use /var/www/html/ or can I just use /var/www/?
I read docs, in part http://ipxe.org/howto/winpe and I already have a wim file but also created an .iso from MDT 2012, now I’m trying to get all this to boot.
My issue is if I use the ISO, I have to press a key to boot from CD or DVD like if I was booting from an install disc which is a bit different than the current setup on PXE which brought us directly to the LiteTouch environment.
Can’t I simply take the wim file already in MDT and along with other needed files have the same “feel” as if I was using the old PXE boot?
Anyone did that or knows what I mean? -
-
@FlowLive said:
Is it important to actually use /var/www/html/ or can I just use /var/www/?
I read docs, in part http://ipxe.org/howto/winpe and I already have a wim file but also created an .iso from MDT 2012, now I’m trying to get all this to boot.
My issue is if I use the ISO, I have to press a key to boot from CD or DVD like if I was booting from an install disc which is a bit different than the current setup on PXE which brought us directly to the LiteTouch environment.
Can’t I simply take the wim file already in MDT and along with other needed files have the same “feel” as if I was using the old PXE boot?
Anyone did that or knows what I mean?As for point 1. the path is specific to your distribution. The rhel branch of linux has /var/www/html the debian branch uses /var/www. To answer your question it needs to be what is correct for your distribution. What I should have said (maybe) is off the root of your web servers base directory (I’m not sure if that is any clearer).
OK, remember that the ISO image IS a CDROM image. This (press any key to boot) is exactly what you get when you boot from a CDROM. So on the plus side it is working exactly correct. Whoot!! but not as you need.
To get roughly the equivalent of what you have with WDS you need to use the option 2 from my post. This is a bit more complicated to setup, but in this case you will take the boot.wim (or what ever the wim file is called) from MDT rename it to boot.wim and install it in the ISO folder.
Let me see what I can do to archive my setup.
-
Then take the wim file from MDT and move it to the ISO folder and rename it boot.wim. Then just follow the option 2 instructions. If you want to replicate what I’ve done here install MS waik and build this directory structure. None of this code belongs to me or my company.
-
@george1421
Yes but if I put it in the ISO folder it would be the one from the .iso as well, I would end up having the same boot prompts as if I was booting off the disc. Or can I take some files from MDT, like the bcd file and boot.sdi?Just to clarify, i don’t know if it’s the new Debian settings or Fog that changed it but I do see DocumentRoot to be /var/www/html/ found this in /etc/apache2/available-sites/000-default.conf and 001-fog.conf files.
I’m trying to download the files but i guess dropbox is blocked over here, thanks anyways!
I did create the structure using WAIK, I will try to get this to boot see if it’s any different.
-
@george1421
“Then copied the LiteTouchPE_x86.wim from MDT deployment share to /var/www/html/ISO as boot.wim.”There is already a boot.wim file in /var/www/html/ISO/boot/, you keep both of em or you made an error on the destination?
-
@FlowLive Sorry I got tied up in meetings this AM.
You want to copy that tar file to where your web root is. That is either /var/www or /var/www/html depending on your distribution. In the case of this tar file it creates an upper case folder called ISO when you run the tar -zxf command to extract the file.
When you get done, there should be wimboot in the http servers root directory and a folder called ISO. The LiteTouchPE_x86.wim comes from MDT and it needs to be copied into the ISO folder as boot.wim. That file does not go into the boot folder it self just into the /ISO folder as I defined in the option settings.
-
@george1421
Got it, like I said dropbox is blocked but I managed to get that ISO folder on there, Along with 2 different .wim files for English and French versions of windows and just need to call it properly in the settings, all is good!"If the boot.wim is called differently, it would be called like this;
Parameters: kernel http://<fog_server_ip>/wimboot initrd http://<fog_server_ip>/ISO/boot/bcd BCD initrd http://<fog_server_ip>/ISO/boot/boot.sdi boot.sdi initrd -n boot.wim http://<fog_server_ip>/ISO/LiteTouchPE_x64.wim boot.wim bootI guess it calls boot.wim to load LiteTouchPE_x64.wim? Or whatever the .wim file is called…
Really happy with this, thanks george1421!
-
@FlowLive I know it works when you call the boot.wim boot.wim. In theory it should work that way too, because you are using a logical name (boot.wim) to the physical name mapping.
Just be aware there are a bunch of other files in that ISO directory structure you need. That is why I created the tar file. I’m sorry I didn’t think about it being blocked across the pond. But if you have WAIK then you have everything I have.
Let us know how it goes (good or bad [I expect good things only]).
Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!
-
@george1421
It works! Both solutions works!
I’m now playing around with adding entry in the menu, having some that tries a command with the description or item name… weird but naming it differently seems to work for now. -
@george1421 Can we get a more formal post of both solutions for the WiKi?
-
@FlowLive Hey that’s great to hear that someone can repeat my madness…
@Wayne-Workman Le me see if I can clean it up a bit. I need to see if I can integrate what @Sebastian-Roth noted in this thread about using a logical to represent the fog server IP. I think I can make it work.
