Cannot boot into fog menu in UEFI mode

[Charlee593]

@Tom-Elliott
Thanks for fixing the fog menu. Now it loads to the fog menu. But it has trouble registering the device. After selecting the “Quick Registration” option on the fog menu, it stuck on ‘/init.xz’, like the image below.

• Running on: Fog Project version 5283 (pull from github)
• Kept the option 67 to ‘ipxe.efi’ (Also tried snponly.efi and snponly.efi, same result)

[Wayne Workman]

@Charlee593 What is the make/model of the device? Are you using a USB ethernet adapter?

[Charlee593]

@Wayne-Workman

• Lenovo ThinkPad T430s and Dell Latitude E6540
• I’m using the Ethernet port from the laptop

I have more available laptops to test on, which one do you have that is working?

[Wayne Workman]

@Charlee593 said:

T430s

verified working on 2015-06-24 using undionly.kpxe
https://wiki.fogproject.org/wiki/index.php/WorkingDevices

Are you purposely trying to UEFI boot? Have you not tried to put the laptops into legacy mode, or turn legacy option ROM support on?

[Tom Elliott]

@Charlee593 Can you try some of the other .efi files, for example, try the snp.efi, or snponly.efi.

Or you can try the adapter (if it’s intel or realtek) efi file so (intel.efi or realtek.efi).

[Sebastian Roth]

@Wayne-Workman said:

Are you purposely trying to UEFI boot? Have you not tried to put the laptops into legacy mode, or turn legacy option ROM support on?

Definitely a good point. But shouldn’t we be working towards better UEFI support in FOG?

@Charlee593 There is a setting to enable kernel debug output on the console for booting. Please enable KERNEL_DEBUG and crank up the LOGLEVEL in your FOG Settings (FOG Boot Settings) to 7. Hope we see more messages than just this.

[Wayne Workman]

@Sebastian-Roth said:

Definitely a good point. But shouldn’t we be working towards better UEFI support in FOG?

100% agree, but I had to ask.

[Sebastian Roth]

@Tom-Elliott He already tried snp.efi and snponly.efi. Do you really think that iPXE is having an issue that can be fixed by using a different binary? Kernel and init ram disk are being loaded. So NIC capability in iPXE is definitely fine…

[Tom Elliott]

@Sebastian-Roth It’s not always about the nic capability, but rather the memory segment to be used to load the init/kernel.

That said, of course there’s always the possibility that it’s loading is just taking a while. Not everything is instant. So how long are these sitting there?

[Charlee593]

Thanks for the replies.
@Wayne-Workman said:

Are you purposely trying to UEFI boot? Have you not tried to put the laptops into legacy mode, or turn legacy option ROM support on?

We are purposely trying UEFI boot, the software that we are testing require window 8 or 10 in UEFI mode. We tried legacy mode and it works.

@Sebastian-Roth said:

There is a setting to enable kernel debug output on the console for booting. Please enable KERNEL_DEBUG and crank up the LOGLEVEL in your FOG Settings (FOG Boot Settings) to 7. Hope we see more messages than just this.

We set it to 7 and it show no more than previous message, no difference.

@Tom-Elliott said:

Can you try some of the other .efi files, for example, try the snp.efi, or snponly.efi.
I tried snp.efi, snponly.efi, intel.efi this time, they all stuck on “init.xz”

@Tom-Elliott said:

That said, of course there’s always the possibility that it’s loading is just taking a while. Not everything is instant. So how long are these sitting there?

It sit on the “init.xz” for around 5 minutes then it goes back to the boot manager of the laptop. Then I check the fog manager, no host has been registered.

[Sebastian Roth]

Debug enabled (DEBUG=image) ipxe.efi binary to try: ipxe.efi

[Sebastian Roth]

Might this change have anything to do with it?? http://sourceforge.net/p/freeghost/code/4302/tree//trunk/src/ipxe/src-efi/config/general.h?diff=4031

I kind of doubt it but it still jumped at me when I looked through the recent changes on ipxe in our code.

The binary I compiled is without those defines…

[Tom Elliott]

I suppose it could, I can remove it and try again.

[Charlee593]

It is able to register the device now. I reinstalled the fog server and run Sebastian’s ‘ipxe.efi’. Running Fog version 5291. Thanks for the help

[Wayne Workman]

@Charlee593 Way to go! and thank you @Sebastian-Roth !!!

I must now try this version of ipxe.efi and see if I can UEFI boot a Dell

[Charlee593]

@Wayne-Workman I gonna try capture and deploy an UEFI Window 8 enterprise image.

Fog version 5291

[Tom Elliott]

Can you re-retry with latest trunk? I’ve removed the image lines as @Sebastian-Roth suggested and pushed it out.

[Charlee593]

@Tom-Elliott
Capture and Deploy window 8 in UEFI mode works. ( Fog version 5291 )
Now I gonna try the Fog version 5293.

[Charlee593]

@Tom-Elliott The latest Fog can register the host too ( Fog version 5293 ). Thanks for the help

[Wayne Workman]

Good news is I just UEFI network booted a Optiplex 9020 for the first time EVER! Awesome!!!

Bad news is our network manager goofed the entire district’s dhcp… I told him not to set options for our administration center in the super scope because it’d interfere… gah…