Image download (Multicast) stuck at 100%
-
@Tom-Elliott “Fog (3515)” on Debian 8, it only stuck on 100% no blackscreen … only the message appears “Partclone successfully restored the Image”.
-
So it’s not exiting partclone?
-
@Tom-Elliott yes
-
But when you reboot (forcibly) it’s not trying to boot back into the tasking?
-
@Tom-Elliott I have a “force PXE over Wake On Lan” Option, When I try after the force reboot to boot over pxe it starts the download again.
-
Can you try upgrading to 3519?
I’m trying a new methodology. I don’t know if it will work better or not, but with any luck…
-
@Tom-Elliott thanks I try
-
I found another problem. You should be fine @Tune389 but just a forewarning to others paying attention.
SVN 3521 Should correct all of this.
-
@Tom-Elliott by the way since version > ~3480 the DHCP setup don’t work (“Setting up and starting DHCP Server…Failed!”), I delete every time the “configureDHCP;” line in “.install.sh” to skip this step …
-
@Tom-Elliott still stuck at 100%
(Partclone) with 3521 -
@Tune389 Sounds a bit dumb, but can you post a screenshot/pic of the system?
-
For the record, I’ve been talking to Tom about this issue, because I’m experiencing the same.
It’s driving me nuts.
I’ve set my global maximum_connections to 500 but it didn’t help.
Seems like 6 will finish every time, the rest just sit and stare at the wall (as noted in first post).
Right now, I’m on r3513.
After this unicast session of 24 computers finishes, I’ll upgrade and pray this issue goes away.
-
-
-
Update on this, just tried multicast with thirteen (13) Optiplex 7010s.
Same issue…
Going to try to increase the max_packet size as Tom suggested via IM. I’ve got a little time to play around with it today… Thanks to FOG, I’m WAY ahead this summer, even with unicasting everything…
-
I changed the max_allowed_packet size to 32M and it didn’t help.
The default is 16M.
Here is the reference: https://dev.mysql.com/doc/refman/5.5/en/packet-too-large.html
Also, here is a video of what I’m seeing:
Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!
Daily Clean Installation Results:
https://fogtesting.fogproject.us/
FOG Reporting:
https://fog-external-reporting-results.fogproject.us/ -
@Wayne-Workman said:
I changed the max_allowed_packet size to 32M and it didn’t help.
The default is 16M.
Here is the reference: https://dev.mysql.com/doc/refman/5.5/en/packet-too-large.html
Also, here is a video of what I’m seeing:
That video made me puke lol
-
They are still just sitting there…
Multicast is busted somehow.
-
Also, domain joining issues started happening with the Legacy Client at the same time that we started using Multicast.
If we unicast to 2 or 3, they join the domain ok.
If we unicast to 5+ (like 20 and 30), none of them join the domain.
-
Tomorrow, I’m going to quickly build up a new Fedora 21 box and put an older Trunk version of FOG on it. I know for sure it was working at r2922, so that’s what I’ll try to use and then I can test it.
If it’s successful, I’ll iterate up by 100 revisions at a time (snap-shoting each one), and when it breaks, I’ll roll back and iterate up by 10, till it breaks, then iterate up by 1 and find EXACTLY where things went wrong.
