Image download is stuck at 99%
-
I did these steps …
- clear all files in /images
- delete databse from fog
- run fog installation
- upload an image (works fine)
- try an download - but failed .mntcheck is missing
- create .mntcheck file
- try the download again - it works. (unicast)
- try multicast - failed on “starting to restore image” without an error.
- reboot fog server
- try it again - nope …
- run again the fog setup (last time it fixed the problem)
- start multicast
- 97% - 98% - 99% - 100%
- and after 5 min still at 100% … no reboot …
- after a hard reboot - problem again partition size is not correct.
- /topic/5022/image-download-is-stuck-at-99/7
Fog-version: 3480
-
@Tune389 Hi, have you test multicast with multiple hosts ? If yes, could you try with a single host.
-
@ch3i same Problem
-
@Tune389 I’ll try to multicast on my server.
-
-
@ch3i at “starting to restore image” ?
-
@Tune389 Yep. Have that in my log :
[05-28-15 11:26:17 am] | Task (55) is new! [05-28-15 11:26:17 am] | Task (55) /fogimages/MASTER5800ADM image file found. [05-28-15 11:26:17 am] | Task (55) 1 client(s) found. [05-28-15 11:26:17 am] | Task (55) sending on base port: 55828 [05-28-15 11:26:17 am] CMD: cat /fogimages/MASTER5800ADM/d1p1.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 300 --portbase 55828 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /fogimages/MASTER5800ADM/d1p2.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 300 --portbase 55828 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /fogimages/MASTER5800ADM/d1p3.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 300 --portbase 55828 --full-duplex --ttl 32 --nokbd --nopointopoint; [05-28-15 11:26:17 am] | Task (55) has started. [05-28-15 11:26:27 am] | Task (55) is no longer running. [05-28-15 11:26:27 am] | Task (55) has been cleaned as complete.Reading the log, that’s the speedest multicast deploy of the world lol
-
@ch3i I have the same issue, executing the fogsetup fixed this (see here) problem. I don’t know why but I have to execute the setup also a second time after a clean installation to fix the upload freeze.
edit:
@Wayne-Workman the Problem is not solved only the freeze at the start of the upload
-
@ch3i any new informations about your tests? Is it working now, or is it a generally fog bug in the current version?
-
-
@ch3i okay thanks for the info. I try now to downgrade my fog version back to 1.2 …
-
-
