Multiple problems with FOG after Upgrade.
-
@DarkEnergy said:
Hi there to all of you FOGGERS.
I am now having issues randomly with some other images.
I am getting and error:
" An error has been detected!
Image failed to restored
Computer will reboot in 1 minute"The error is after Partclone try to access the image.
Partclone v0.2.78 http://partclone.org
Starting to resotre image (-) to device (/dev/sda1)
device (/dev/sda1) is mounted at
error exitTo save some time I have checked the password in the storage and also the TFTP sever and they are all good, I have also reset the password for fog user to the same as the one for the storage and the TFTP, plus check all the permissions on the file system set to 777 and still no go.
I have been having problems sine the fist update I did to the server.
Is there a way to just keep the images, destroy the server and reinstall FOG back to the original configuration in 1.2.0 without any of the updates. The last schema change in MySQL was the one giving me the issue since then I haven’t been able to get FOG were it was.Thanks for all you help.
It’s a partclone image or an old partimage ?
-
@ch3i
I am not sure what are you asking me. The only FOG I have used is 1.2.0. I am not sure if the image was created with partimage. I can tell you for sure that some images work some other don’t. -
@DarkEnergy said:
@ch3i
I am not sure what are you asking me. The only FOG I have used is 1.2.0.Partclone
-
@DarkEnergy Can you list file in /images/image_that_restore_bug ?
-
@ch3i
You meant the imaging software, got you!!!
If there is a way to view a FOG log I can confirm or deny your answer, otherwise I will have to take your word for. My major concern is how to fix it if there is a way. -
@DarkEnergy said:
@ch3i
You meant the imaging software, got you!!!
If there is a way to view a FOG log I can confirm or deny your answer, otherwise I will have to take your word for. My major concern is how to fix it if there is a way.If you have old image before 1.2, the FOG_FORMAT_FLAG_IN_GUI display the information in the image details.
-
@ch3i
Looking at the image info, I got:
"Deploy MethodPartclone"
I am thinking the image should be ok as it is created with Partclone as well. After looking a several of my images, there are all created with Partclone imaging software.
How do I fix the issue?
-
@DarkEnergy said:
@ch3i
Looking at the image info, I got:
"Deploy MethodPartclone"
I am thinking the image should be ok as it is created with Partclone as well. After looking a several of my images, there are all created with Partclone imaging software.
How do I fix the issue?
Partclone is not an issue. Could you ls -l /images/a_bugged_restored_image
-
@ch3i
I already did a ls -ltr which display all the folders and subfolders under /images.
You are requesting another listing of the directories in a listing format. Which would be almost the same as the one I already provided. -
@DarkEnergy said:
@ch3i
I already did a ls -ltr which display all the folders and subfolders under /images.
You are requesting another listing of the directories in a listing format. Which would be almost the same as the one I already provided.I’ve a hard day today, where ???
-
Could you please do a debug deployment? There are instructions for this in the “Troubleshooting NFS” WiKi article. https://wiki.fogproject.org/wiki/index.php/Troubleshoot_NFS#Using_a_FOG_debug_deployment_for_testing_.28easy_.26_quick_way.29
There are some instructions in there for testing upload and download. Can you please follow those and see if they are successful?
-
@Wayne-Workman
Can you please clarify couple of point on this Wiki? Where is the directory being created? Where is the test.txt file located? is this in the server or in the client? Is this a SSH session to the server?
Currently I am getting an error but I am not sure if it is because I haven’t created the test.txt file.
The error is:
cp: cannot stat '/images/test.txt: no such file or directory@Wayne-Workman
Scratch the above, I was blind and lazy not to ready the whole article. I missed one point.
I was able to copy the text.txt file from /images to /images/dev/ through the client.
Anything else you would like me to try? -
@ch3i
No biggie. I totally understand.
It is below, scroll down until you see big bold letters for tftpboot directory.
The posts have not number so, it is hard to said exactly where. -
https://forums.fogproject.org/topic/4997/multiple-problems-with-fog-after-upgrade/19#
@ch3i said:@DarkEnergy said:
@ch3i
I already did a ls -ltr which display all the folders and subfolders under /images.
You are requesting another listing of the directories in a listing format. Which would be almost the same as the one I already provided.I’ve a hard day today, where ???
-
@DarkEnergy said:
@ch3i
I already did a ls -ltr which display all the folders and subfolders under /images.
You are requesting another listing of the directories in a listing format. Which would be almost the same as the one I already provided.The sub-folders are not included in your post.
ch3i was specifically wanting to see the permissions on the files inside the directory of a bad image - And I want to see them too.
Please post the ENTIRE output of this, do not cut anything out:
[CODE]ls -laR /images[/CODE]
If it’s too big to post, put the output into a txt file and upload here. I still think it’s permissions related.
It should also be noted that a simple following of recommended permissions would solve any issues with permissions:
[CODE]sudo chmod -R 777 /images[/CODE] -
@Wayne-Workman
In my post https://forums.fogproject.org/topic/4997/multiple-problems-with-fog-after-upgrade/10?page=2 it is described the permission in UNIX/Linux and how they are calculated.The more I try to use the images the more I discover issues with FOG, now I am getting that the MBR is corrupted and the cannot be downloaded.One of the systems is getting stock at
Using Hard Disk: /dev/sda
and does not continue to the next step until I pressed enter then I get:
Saving Partition Table (GPT)…Invalid Partition DATA!This happens during upload of a new image. I have deleted the old image and created a new one and still having issues.
I don’t see a way to upload a file here. In the old site it was easy to see the u
pload but in this new site I am still looking for the upload button to upload either riles or images.How ever the current permission is sett 777 as under fog and group root to /images. I am not sure what would be the other way.
-
@DarkEnergy Your particular upload issue means the disk has GPT partitions on them where they’re not expected to be.
The current inits attempt to see and fix this for you, but it seems that isn’t working. You will need to put system you’re trying to upload from in an upload-debug state. Once at the prompt, run
fixpartsand accept the things it asks.From there, once fixed, you can type
fogand it should begin the upload process without hanging.To upload a file, there is an icon that has an up-arrow on it. Hopefully that helps.
-
@Wayne-Workman
Files permissions are inherited from the folders unless manually modified. As Tom recommended earlier using the chmod -R which the -R is for recursive with indicates all folders, subfolders and files. -
@Tom-Elliott
Thanks, finally found it. -
@DarkEnergy I’m assuming you mean the upload debug?
For all persons, the Trunk versions of fog make debug tasks a simple check box on any of the tasks. The 1.2.0 they’d have to go to advanced and choose the Upload/Download - Debug (depending on which way they’re trying to go with the image).
