Fatal Error: Failed to Mount NFS Volume

michaeloberg

When I try to get the file from my windows box I get the attached error. I am sorry for all of this, I am new to FOG and Linux but am learning a lot from you guys. Thanks for your help:
tftp error.JPG

ch3i

@michaeloberg Connect you to your server with WinSCP

michaeloberg

So I downloaded WinSCP and was able to connect to the FOG server, but when I try to download the error.log file I get the attached error.

ch3i

@michaeloberg

sudo chmod 755 /tftpboot/error.log

Wayne Workman

@ch3i said:

@michaeloberg

sudo chmod 755 /tftpboot/error.log

I was just about to say something similar, ch3i… Only I’d recommend 777. But anyways, yeah. After you set the proper permissions on that file, you should be able to get it via TFTP.

michaeloberg

Dang your good, thank you so much so I have attached my error log!
error.log

michaeloberg

Any ideas?

Wayne Workman

I would investigate the “favicon.ico” errors first, because there are a lot of them…

https://forums.fogproject.org/search/favicon.ico?in=titlesposts

I’m at the end of the day today… about to head home. I’ll help more later.

michaeloberg

When I try to click on your link I get a page does not exist error message

Wayne Workman

It’s supposed to just take you to a search for “favicon.ico” in the forums.

You can search for it yourself if it doesn’t work.

Wayne Workman

I talked with Tom, he says the “favicon.ico” errors are non-impacting.

So you should search the forums for the other errors. The WiKi too, and Google, why not?

michaeloberg

Is there anything else we can try? I really need this image uploaded ASAP as I have 400 HP 745 G2 systems to load. Any further help is appreciated, I am open to any suggestions!
Michael

Wayne Workman

Update again to the latest trunk version of fog.

Should only require going into wherever you made /svn/trunk
and issuing:
[CODE]svn up
cd bin
./installfog.sh[/CODE]

See what happens then.

michaeloberg

First I want to thank everyone for their help on this forum. I was able to get my FOG updated and it resolved my issues with my new HP 745 G2 laptops. Now I have a different problem with my older HP 3125 laptops. Prior to the upgrade we have imaged these machines hundreds of times without issue. Now all of a sudden when I push an image task to a host, it will look like it is starting the image, then I get the following error:

Target partition size (7864 MB) is smaller than source (59009 MB). Use option –C to disable size checking (Dangerous).

So my next though was to manually wipe all partition on the targeted host. Same error as before after doing this. So my next thought was maybe the image is screwed up, so I loaded a clean version of Windows 7 on the laptop with drivers and uploaded that as a test image (only 10 GB). So now when I try to image it doesn’t even attempt to get to the nice blue screen where it tells you the error, rather it just runs through several lines of text and I notice some errors in different parts of the boot process but here they are:

Starting sshd: OK
/usr/share/fog/lib/funcs.sh: line 17: export: ‘Machines, DC=mydomain, DC=com: not a valid identifier
It gives me this error a few times then farther on get this one:
*Initializing /dev/sda with NTFS partition….error: /dev/sdb2: No such file or directory
Udevd[2768]: inotify_add_watch(6, /dev/sdb2,10) failed: No such file or directory
Error: /dev/sdb2: No such file or directory
Udevd[2768]: inotify_add_watch(6, /dev/sdb2,10) failed: No such file or directory
Done
Done
*Using Hard Disk /dev.sdb
*Erasing current MBR/CPT Tables………………………….Done
Awk: fatal: cannot open file ‘/images/234/d1.original.partitions’ for reading (No such file or directory)
Restoring Partition Tables (MBR)……………………………Done
No extended partitions……………………………………………Done

I have tested other images and they all seem to be working. Any suggestions???