SVN 2979 multicast issues
-
I don’t think those errors are in any way related to your issues.
Most likely, you’re running ubuntu (based on the error messages you’re seeing) and the service started before the network was actually available. This means the service started up, but then the database (mysql) died, but the process that was running for the multicast manager service failed.
The fix:
[code]sudo service FOGMulticastManager stop
sudo service FOGImageReplicator stop
sudo service FOGScheduler stop
sudo service FOGMulticastManager start
sudo service FOGImageReplicator start
sudo service FOGScheduler start[/code] -
Sorry it took so long to reply. Other projects got in the way of me testing this. I have tried doing this and it didn’t work. All of the PC’s hit the partclone screen and just sit there. They never actually start the progress bar no matter how long I wait.
-
In that particular revision, it’s possible to change the multicast address & port used. Did you do that, by chance? (just a stab at helping)
-
No, I left everything as the default except for the wait time which I changed to 5 minutes.
-
In Fedora, there are some systemctl commands to check the status of various services. There’s probably something equivalent in Ubuntu.
If you look at this:
[url]http://fogproject.org/wiki/index.php/FOG_(r2922)Configuration_on_Fedora_21_Workstation_inside_Windows_Server_2012_Hyper-V_using_ProxyDHCP#FOG_Server_Troubleshooting_Help.28Fedora_21.2C_r2922_.26_up.29[/url]
It’ll give examples of those commands in Fedora.
It’s basically to check and see what’s running, what’s not, what has errors…It’s a place to start.
-
Well now that I’m able to tackle this again I followed the wiki for multicast issues and it is pointing to the issue being in our switches. I’ll have to start looking their.
-
After following the instructions for Cisco switches at : [url]http://www.fogproject.org/wiki/index.php/Cisco_Multi_Cast[/url] multi-casting still isn’t working for us. We have the ip pim sparce-dense-mode on the vlans that I’m using to test multicast with and I still have the same problem of the client machine not communicating with the host for a multicast session. Is there some other settings that needs to be applied that aren’t part of the wiki?
-
Can you explain your network environment’s setup?
Switch model?
Where is the router (topographically)?
Are you using Vlans?
What’s the FOG server’s network interface configuration(s)? (include subnet mask, gateway, DNS, IP address)
Where’s the client you’re testing with?
Are you using DHCP?
Can you tell us what IP address the client is getting/assigned?Just covering the bases at this point.
-
Our core switches are 4510’s and our stacked switches are 3750’s. All switches are Cisco Catalyst switches. Topographically they are spread throughout our small town in each of the school buildings. We are using Vlans. The FOG config is 172.28.2.21 255.255.255.0; Default route is 172.28.2.1; DNS 172.28.2.12. I’m testing this on an Optiplex 755 for right now. DHCP is set up on our network. The client is getting an IP of 172.52.8.54
-
FOG server has 172.28.2.21/24
Client has 172.52.8.54/24The problem is that they are within different broadcast domains.
Broadcast traffic does not traverse broadcast domains (routers don’t pass broadcast packets).The network portion of the FOG server/node’s IP address must match the network portion of the Client’s IP address. So, that particular FOG server can only image clients with an address beginning in 172.28.2
Try it on a client that is within the same broadcast domain.
Later, once you can get that going, you can work towards setting up FOG storage nodes with the Location snapin. -
So I’m basically going to need to set up a storage node for each vlan we have in order for multicast to work in all of our buildings?
-
[quote=“jamesb, post: 42509, member: 27742”]So I’m basically going to need to set up a storage node for each vlan we have in order for multicast to work in all of our buildings?[/quote]
Yeah, basically.
It might sound scary, but it’s not tough to do, and is documented.
If you have vlans that are assigned the same gateway (the router interface), then you only need one storage node for those Vlans.
Basically, you would need one node in each broadcast domain. That’s if you want it all centralized, with one almighty controlling FOG server for them all.
Before going to that extent though, I’d try getting multicast to work within the broadcast domain that the FOG server is in. You have to do that first to confirm you’re network equipment is configured properly, and that FOG is configured properly.
-
Also, the storage nodes don’t need to be anything fancy (I’ve said this before?)
An old dual-core with a gigabit interface will get the job done in an acceptable amount of time.
Here, in my environment, FOG is virtualized on one of our servers, and can blast an image out to 1 client in 8 minutes (almost 50GB image, uncompressed). We can image 29 systems with that particular image in 29 minutes using multicast (I blame a bad patch cable somewhere).
-
[quote=“Wayne Workman, post: 42508, member: 28155”]…
The problem is that they are within different broadcast domains.
…[/quote]Not correct from my point of view. WOL is a bit of an issue if you want to wake up clients in another subnet. But Multicasting (IF setup correctly) sould work beyond broadcast domains! I have my server in 192.168.6.x/24 and some of my clients in 192.168.6.x/24 (VLAN6) but also others in 192.168.5.x/24 (VLAN5). All doing multicast imaging without any issue!!!
-
I know I had broken the multicast to other bc domains for a little while and I don’t remember when it was found and corrected for. That said I know this is corrected for in current version of svn. I’d recommend updating and see if that helps you out. For wol I’d say install the wolbroadcast plugin as wol across vlans is what this was designed for. You will need your main routing switch or router set to enable ip-directed-broadcasts
-
[quote=“jamesb, post: 42509, member: 27742”]So I’m basically going to need to set up a storage node for each vlan we have in order for multicast to work in all of our buildings?[/quote]
I stand somewhat corrected.
I found this: [url]http://networkengineering.stackexchange.com/questions/10065/how-broadcasting-works-on-different-networks[/url]
Which basically says that limited broadcasts are always dropped, but a router can be configured to allow directed broadcasts by running [B][SIZE=14px][FONT=Droid Sans Mono][COLOR=#222222]ip directed-broadcast[/COLOR][/FONT][/SIZE][/B] (I assume on a Cisco router).
Have you done this, jamesb ?
-
I haven’t tried the ip directed-broadcast yet, I’m having our network person get that setup up on our switches and routers now.
-
Before my network guy wants to open up the switches with this setting he wants to try a different mcast address. I’ve tried to get the 239 address to be used but FOG always uses the 236 address. I’ve overwritten in the FOG multicast settings in the web GUI but it’s not showing the change in the log files.
-
As I already said… From my point of view multicast is NOT broadcast! You don’t need directed broadcasts to make multicast work. Just my two cents…
Do you still have errors in your apache log file??Have you gone through this guide yet? [url]http://fogproject.org/wiki/index.php?title=Troubleshooting_a_multicast[/url]
-
[quote=“jamesb, post: 42582, member: 27742”]Before my network guy wants to open up the switches with this setting he wants to try a different mcast address. I’ve tried to get the 239 address to be used but FOG always uses the 236 address. I’ve overwritten in the FOG multicast settings in the web GUI but it’s not showing the change in the log files.[/quote]
SVN 2920 & up supports custom multicast address and port settings, along with a few other settings too I think.
That change was made to get FOG working at my location, and it works fine here. We don’t use the default [U]broadcast address[/U] for our broadcast domains, there’s custom setup intended to somewhat contain any multicast stream to prevent network-slowdown.
I’m not sure how the setup on the router & switches was accomplished here (not my job), I just know that it works.
239 & 236 addresses? I don’t follow.
By default, according to the IP info you gave earlier, the broadcast address for the segment that the FOG server is on should be: 172.28.2.255
Have you gotten multicast to work on the FOG server’s V-lan yet? What are the errors associated with [U]that[/U]?
