Unable to register host no reason listed


  • Testers

    Updated to svn 2944 from 2933 when I attempt to register a host it errors out with a message of unable to register for the following reason with no text after it then proceeds to do the inventory and then trys to send and gets stuck there. I also have reports of images not being pushed either and will test that in a bit as soon as a machine becomes available.

    Ubuntu 12.04
    apache error log as follows.
    http://10.200.10.150/fog/management/index.php?node=tasks&sub=active-snapins
    http://10.200.10.150/fog/management/index.php?node=tasks&sub=active-snapins
    http://10.200.10.150/fog/management/index.php?node=tasks&sub=active-snapins
    http://10.200.10.150/fog/management/index.php?node=tasks&sub=active
    http://10.200.10.150/fog/management/index.php?node=tasks&sub=active
    http://10.200.10.150/fog/management/index.php?node=host

    this repeats alot
    fog install log.

       ..#######:.    ..,#,..     .::##::.   
    

    .:###### .:;####:…;#;…
    …##… …##;,;##::::.##…
    ,# …##…##:::## …::
    ## .::###,##. . ##.::#.:######::.
    …##:::###::…#. … .#…#. #…#:::.
    …:####:… …##…##::## … #
    # . …##:,;##;:::#: … ##…
    .# . .:;####;::::.##:::;#:…
    # …:;###…

    ###########################################

    FOG

    Free Computer Imaging Solution

    http://www.fogproject.org/

    Developers:

    Chuck Syperski

    Jian Zhang

    Peter Gilchrist

    Tom Elliott

    GNU GPL Version 3

    ###########################################

    Version: 1.3.0 Installer/Updater

    • Found FOG Settings from previous install at: /opt/fog/.fogsettings
    • Performing upgrade using these settings…

    Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

    #####################################################################

    FOG now has everything it needs to setup your server, but please
    understand that this script will overwrite any setting you may
    have setup for services like DHCP, apache, pxe, tftp, and NFS.

    It is not recommended that you install this on a production system
    as this script modifies many of your system settings.

    This script should be run by the root user on Redhat or with sudo on Ubuntu.

    ** Notice ** Redhat users will need to disable SELinux and iptables in
    order to use FOG
    Please see our wiki for more information at http://www.fogproject.org/wiki

    Here are the settings FOG will use:
    Base Linux: Debian
    Detected Linux Distribution: Ubuntu
    Installation Type: Normal Server
    Server IP Address: 10.200.10.150
    DHCP router Address:
    DHCP DNS Address: 10.200.10.33
    Interface: bond0
    Using FOG DHCP: 0
    Internationalization: 1
    Image Storage Location: /images
    Donate: 0

         DHCP will NOT be setup but you must setup your
         current DHCP server to use FOG for PXE services.
    
         On a Linux DHCP server you must set:
             next-server
    
         On a Windows DHCP server you must set:
             option 066 & 067
    
           Option 066 is the IP of the FOG Server: (e.g. 10.200.10.150)
           Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)
    

    Are you sure you wish to continue (Y/N)
    Installation Started…

    Installing required packages, if this fails
    make sure you have an active internet connection.

    • Preparing apt-get

    • Packages to be installed: apache2 php5 php5-json php5-gd php5-cli php5-mysql php5-curl mysql-server mysql-client tftpd-hpa tftp-hpa nfs-kernel-server vsftpd net-tools wget xinetd sysv-rc-conf tar gzip build-essential cpp gcc g++ m4 htmldoc lftp openssh-server php-gettext php5-mcrypt language-pack-it language-pack-en language-pack-es language-pack-zh-hans

    • Skipping package: apache2 (Already installed)

    • Skipping package: php5 (Already installed)

    • Skipping package: php5-common (Already installed)

    • Skipping package: php5-gd (Already installed)

    • Skipping package: php5-cli (Already installed)

    • Skipping package: php5-mysql (Already installed)

    • Skipping package: php5-curl (Already installed)

    • Skipping package: mysql-server (Already installed)

    • Skipping package: mysql-client (Already installed)

    • Skipping package: tftpd-hpa (Already installed)

    • Skipping package: tftp-hpa (Already installed)

    • Skipping package: nfs-kernel-server (Already installed)

    • Skipping package: vsftpd (Already installed)

    • Skipping package: net-tools (Already installed)

    • Skipping package: wget (Already installed)

    • Skipping package: xinetd (Already installed)

    • Skipping package: sysv-rc-conf (Already installed)

    • Skipping package: tar (Already installed)

    • Skipping package: gzip (Already installed)

    • Skipping package: build-essential (Already installed)

    • Skipping package: cpp (Already installed)

    • Skipping package: gcc (Already installed)

    • Skipping package: g++ (Already installed)

    • Skipping package: m4 (Already installed)

    • Skipping package: htmldoc (Already installed)

    • Skipping package: lftp (Already installed)

    • Skipping package: openssh-server (Already installed)

    • Skipping package: php-gettext (Already installed)

    • Skipping package: php5-mcrypt (Already installed)

    • Skipping package: language-pack-it (Already installed)

    • Skipping package: language-pack-en (Already installed)

    • Skipping package: language-pack-es (Already installed)

    • Skipping package: language-pack-zh-hans (Already installed)

    Confirming package installation.

    • Checking package: apache2…OK
    • Checking package: php5…OK
    • Checking package: php5-json…OK
    • Checking package: php5-gd…OK
    • Checking package: php5-cli…OK
    • Checking package: php5-mysql…OK
    • Checking package: php5-curl…OK
    • Checking package: mysql-server…OK
    • Checking package: mysql-client…OK
    • Checking package: tftpd-hpa…OK
    • Checking package: tftp-hpa…OK
    • Checking package: nfs-kernel-server…OK
    • Checking package: vsftpd…OK
    • Checking package: net-tools…OK
    • Checking package: wget…OK
    • Checking package: xinetd…OK
    • Checking package: sysv-rc-conf…OK
    • Checking package: tar…OK
    • Checking package: gzip…OK
    • Checking package: build-essential…OK
    • Checking package: cpp…OK
    • Checking package: gcc…OK
    • Checking package: g++…OK
    • Checking package: m4…OK
    • Checking package: htmldoc…OK
    • Checking package: lftp…OK
    • Checking package: openssh-server…OK
    • Checking package: php-gettext…OK
    • Checking package: php5-mcrypt…OK
    • Checking package: language-pack-it…OK
    • Checking package: language-pack-en…OK
    • Checking package: language-pack-es…OK
    • Checking package: language-pack-zh-hans…OK

    Configuring services.

    • Setting up and starting MySql…OK

    • Backing up user reports…OK

    • Setting up and starting Apache Web Server…OK

    • Changing permissions on apache log files…OK

    • Downloading kernels and inits…OK

    • Copying back any custom hook files.

    • Copying back any custom report files.
      You still need to install/update your database schema.
      This can be done by opening a web browser and going to:

      http://10.200.10.150/fog/management

    Press http://10.200.10.150/fog/management

      Default User:
             Username: fog
             Password: password

  • Testers

    Thank you, you guys are awesome and are doing a fantastic job.


  • Testers

    Ok it works now that I’ve taken off my stupid hat you are correct sir I was using the wrong file name and icons show now.


  • Senior Developer

    Are you sure you’re copying the right files. Icon is broken, but should work on the published link now.

    bzImage should be the x86_64 kernel
    bzImage32 should be the x86 kernel


  • Testers

    I tried 3.18.3 and 3.18.2 both kernel panic. FYI download kernel icon links are broken.


  • Senior Developer

    You can select any other, I’m about to fix 3.18.4, the prior was 3.18.3 (i’d recommend both just in case)


  • Testers

    What was the previous one I should select.


  • Senior Developer

    I know exactly what the issue is. Fix coming shortly.

    In the mean time, can you downgrade your kernel using the kernel update feature. We’re currently at 3.18.4, and this is the bad kernel.


  • Testers

    Here is a video of the boot process on a image download. https://dl.dropboxusercontent.com/u/24177483/VIDEO0023.mp4
    Looks like it gets all the way to sending inventory and than gets a blank screen with a cursor at the bottom left corner.


  • Testers

    I’ve tested 3 hosts for registration one was already registered and I deleted the record as a test all show the same issue. It does appear to be all hosts.


  • Senior Developer

    I’m going to guess this isn’t necessarily on All hosts, but rather just this particular host?


Log in to reply
 

324
Online

38727
Users

10554
Topics

99920
Posts

Looks like your connection to FOG Project was lost, please wait while we try to reconnect.