PXE boot error - Fog 1.2 on Ubuntu 12.0.4.5
-
I installed FOG 1.2 on a fresh install of Ubuntu 12.0.4.5. Installation went fine. I’m running on a box with 2 NICs, 1 for internet access for updates and accessing the FOG webui, and the other a private network for image deployment (in my network environment I’m not allowed access at the DHCP server, so Ubuntu is filling that role on the private network)
From what i can tell, the PXE boot goes fine (machine pulls an ip from dhcp, ipxe loads) up until it tries to load bg.png, from the ip of wrong NIC.
[ATTACH=full]1557[/ATTACH]
Any suggestions on where I can adjust this setting? All the imaging work should be coming off the 192.168.x.x network. I have no idea why it is grabbing the boot.php from the proper address but then looking for bg.png from the 10.x.x.x network.
Thanks
[url=“/_imported_xf_attachments/1/1557_fog 1-2 error.jpg?:”]fog 1-2 error.jpg[/url]
-
Do you have a DHCP server on the private 192.168.x.x network?
Is 10.x.x.x on eth0? and 192.168.x.x on eth1? -
Yes, isc-dhcp server is running on the 192.168.x.x network on eth0. eth1 is statically assigned to the 10.x.x.x network for linux updates.
[url=“/_imported_xf_attachments/1/1558_dhcp server.jpg?:”]dhcp server.jpg[/url]
-
on the fog settings page, what ip is set for “web server” ?
-
Junkhacker, thank you! I didn’t even think about this. I had it bound to the 10.x.x.x address. Changed to the 192.168.x.x and the FOG menu is now booting.
I swear i had switched this earlier and tested, but apparently it did not save the change (please read: [U]I[/U] failed to save the change)