TFTP & PXE from Windows
-
Why don’t you save yourself a headache and just set FOG up the way it was intended then pass the DHCP option settings to whoever does have access to the DHCP server to configure. (Assuming you’re using a third party DHCP server from your original post) That way you wont have to faff on with this and you can have a fab fog server running peachy like
-
[quote=“Liam Sullivan, post: 39826, member: 23009”]Why don’t you save yourself a headache and just set FOG up the way it was intended then pass the DHCP option settings to whoever does have access to the DHCP server to configure. (Assuming you’re using a third party DHCP server from your original post) That way you wont have to faff on with this and you can have a fab fog server running peachy like :)[/quote]
Well… this is somewhat of a “one-off” setup because the standard protocol is to use Symantec Ghost which I’m not a real big fan of, so that being the case I don’t think I’m gonna get any help with changes to the DHCP server back at headquarters.
I’ve got things configured using Fog and the proxyDHCP to the point where the client is getting an IP and trying to pull something down via TFTP but it craps out and returns a message saying “[FONT=Tahoma]./default.ipxe connect timed out.” and I’m dead in the water. [/FONT]
-
ipxe is trying to download default.ipxe from the same location as where it loaded undionly.kpxe from. is it there?
-
[quote=“Junkhacker, post: 39837, member: 21583”]ipxe is trying to download default.ipxe from the same location as where it loaded undionly.kpxe from. is it there?[/quote]
Both files are present in my /tftpboot folder.
-
Can you download the file using a windows computer?
Change undionly.kpxe to default.ipxe in the command in this wiki help.
[url]http://fogproject.org/wiki/index.php/Tftp_timeout…#0.33_and_1.x.x[/url] -
[quote=“Wolfbane8653, post: 39856, member: 3362”]Can you download the file using a windows computer?
Change undionly.kpxe to default.ipxe in the command in this wiki help.
[url]http://fogproject.org/wiki/index.php/Tftp_timeout…#0.33_and_1.x.x[/url][/quote]Yes, I can tftp the default.ipxe from an unrelated Windows box. Transfer successful: 304 bytes in 1 second(s), 304 bytes/s
-
and you’re downloading this from the windows tftp server you set up, not the fog server, right?
-
[quote=“Junkhacker, post: 39860, member: 21583”]and you’re downloading this from the windows tftp server you set up, not the fog server, right?[/quote]
The test was done on a totally unrelated workstation that has the Windows TFTP service installed. It’s even on a different subnet so that crossed over successfully.
-
Please forgive my brashness or don’t.
You fail to listen to what we’re asking you and I don’t know how to ask it any differently for your understanding.
/tftpboot doesn’t matter at this point. The linux server is not where you are getting the tftp information if your’e tftp server is being hosted from windows. So why do you keep getting us information about the linux host?
Please follow the instructions based on your setup, not what you think is going to happen. If you’re pointing the server (DNSMasq) at windows, you need to perform these tests at the windows side, not the linux side.
Please check your Windows TFTP folder for the file named default.ipxe. My guess is this file does not exist, hence the problem you’re having.
-
[quote=“Tom Elliott, post: 39866, member: 7271”]Please forgive my brashness or don’t.[/quote]
All is forgiven. I contacted Jaymes Driver via PM and in response on troubleshooting an IP address typo became apparent to me and I am now able to boot to the PXE menu. Haven’t tried imaging yet but I will soon. I appreciate yours and everyone’s assistance in helping me muddle through this. Prior to this I had close to zero knowledge of Linux so it’s been a learning experience thus far and will continue to be.
