Hostname Changer not working after upgrade to 1.2.0



  • I recently upgraded from .32 to 1.2.0. Now I can image fine, but the hostname changer isn’t working after the image process.

    here is the end of my logfile:

    8/22/2014 12:49 PM FOG::HostRegister Exiting because only 1 mac address was found.
    8/22/2014 12:49 PM FOG::UserTracker Attempting to connect to fog server…
    8/22/2014 12:49 PM FOG::HostnameChanger Attempting to connect to fog server…
    8/22/2014 12:49 PM FOG::PrinterManager Module is active…
    8/22/2014 12:49 PM FOG::PrinterManager Starting printer manager…
    8/22/2014 12:49 PM FOG::PrinterManager Yielding to other services for 36 seconds.
    8/22/2014 12:49 PM FOG::UserTracker Module is active…
    8/22/2014 12:50 PM FOG::AutoLogOut Module is active…
    8/22/2014 12:50 PM FOG::DisplayManager Module is disabled globally on the FOG Server.
    8/22/2014 12:50 PM FOG::AutoLogOut Timeout value is Zero, disabling module.
    8/22/2014 12:50 PM FOG::AutoLogOut c:\program files\fog\images\alo-bg.jpg
    8/22/2014 12:50 PM FOG::HostnameChanger Module is active…
    8/22/2014 12:50 PM FOG::AutoLogOut at System.Drawing.Image.FromFile(String filename, Boolean useEmbeddedColorManagement)
    at FOG.AutoLogOut.doWork()
    8/22/2014 12:50 PM FOG::HostnameChanger AD mode requested, confirming settings.
    8/22/2014 12:50 PM FOG::HostnameChanger Additional non-parsable characters are at the end of the string.
    8/22/2014 12:50 PM FOG::HostnameChanger at System.ParseNumbers.StringToInt(String s, Int32 radix, Int32 flags, Int32* currPos)
    at System.Convert.ToByte(String value, Int32 fromBase)
    at FOG.FOGCrypt.hexToByte(String hex)
    at FOG.FOGCrypt.decryptHex(String hex)
    at FOG.HostNameChanger.changeHostName()
    8/22/2014 12:50 PM FOG::GUIWatcher Message found, attempting to notify GUI!
    8/22/2014 12:50 PM FOG::UserCleanup Starting user cleanup process…
    8/22/2014 12:50 PM FOG::UserCleanup Attempting to connect to fog server…
    8/22/2014 12:50 PM FOG::UserCleanup Module is disabled globally on the FOG Server, exiting.
    8/22/2014 12:50 PM FOG::GUIWatcher Dispatch OK!
    8/22/2014 12:50 PM FOG::DirCleaner Starting directory cleaning process…
    8/22/2014 12:50 PM FOG::DirCleaner Attempting to connect to fog server…
    8/22/2014 12:50 PM FOG::DirCleaner Module is active…
    8/22/2014 12:50 PM FOG::DirCleaner Determining which directories should be cleaned…
    8/22/2014 12:50 PM FOG::DirCleaner No directories are configured to be cleaned.
    8/22/2014 12:50 PM FOG::DirCleaner Starting directory cleaning loop…
    8/22/2014 12:50 PM FOG::DirCleaner Module has finished work and will now exit.
    8/22/2014 12:50 PM FOG::PrinterManager Management level = 0
    8/22/2014 12:50 PM FOG::PrinterManager This host is set to NO MANAGEMENT, we will exit now.
    8/22/2014 12:50 PM FOG::PrinterManager Major printing operations complete, moving to tracking mode.
    8/22/2014 12:50 PM FOG::PrinterManager New user detected: PC\Administrator
    8/22/2014 12:50 PM FOG::PrinterManager Waiting for tray to load…
    8/22/2014 12:50 PM FOG::GreenFog Starting green fog…
    8/22/2014 12:50 PM FOG::GreenFog Attempting to connect to fog server…
    8/22/2014 12:50 PM FOG::GreenFog Module is active…
    8/22/2014 12:50 PM FOG::GreenFog No actions were found.
    8/22/2014 12:50 PM FOG::GreenFog No tasks found after validation!
    8/22/2014 12:51 PM FOG::MODDebug Reading config settings…
    8/22/2014 12:51 PM FOG::MODDebug Reading of config settings passed.
    8/22/2014 12:51 PM FOG::MODDebug Starting Core processing…
    8/22/2014 12:51 PM FOG::MODDebug Operating System ID: 6
    8/22/2014 12:51 PM FOG::MODDebug Operating System Minor: 1
    8/22/2014 12:51 PM FOG::MODDebug MAC ID 0 6C:62:6D:C3:D2:CB
    8/22/2014 12:51 PM FOG::MODDebug MAC POST String: 6C:62:6D:C3:D2:CB
    8/22/2014 12:51 PM FOG::MODDebug A user is currently logged in
    8/22/2014 12:51 PM FOG::MODDebug Username: PC\Administrator
    8/22/2014 12:51 PM FOG::MODDebug Hostname: PC
    8/22/2014 12:51 PM FOG::MODDebug Attempting to open connect to: [url]http://10.60.82.15/fog/service/debug.php[/url]
    8/22/2014 12:51 PM FOG::MODDebug Server responded with: Hello FOG Client
    8/22/2014 12:51 PM FOG::MODDebug Module has finished work and will now exit.


  • Developer

    in the footer of your fog web page, there’s a link to a page with the fog client software and fogcrypt



  • I thought I did, but potentially not. Is that a separate program I have to run? It sounds like that is probably where things went wrong for me. I will have to go back and look at the documentation.

    Thanks!


  • Developer

    did you encrypt your AD password with fogcrypt?



  • Looks like not having them try to automatically join the domain was the fix. I removed that and the hostname changer started working. Now I need to get that working…



  • No, but I can do that. Maybe I need to turn off the AD Join and just focus on the hostname change piece for now. I will post later after I do that and push the image down again.

    Thanks,



  • [QUOTE]Additional non-parsable characters are at the end of the string.[/QUOTE]

    Did you check the Active Directory Settings ?
    There seems to be a wrong character.


Log in to reply
 

411
Online

38993
Users

10713
Topics

101700
Posts

Looks like your connection to FOG Project was lost, please wait while we try to reconnect.