Fog on Fedora 20
-
Is selinux disabled?
-
It is disable.
Here is the error I gathered during the fog installation:
[I] Press [Enter] key when database is updated/installed.[/I]
[I] * Configuring Fresh Clam…Skipped (See wiki for installation instructions)[/I]
[I] * Setting up storage…OK[/I]
[I] * Setting up and starting NFS Server…Note: Forwarding request to ‘systemctl enable rpcbind.service’.[/I]
[I]Note: Forwarding request to ‘systemctl enable nfs.service’.[/I]
[I]Failed to issue method call: No such file or directory[/I]
[I]OK[/I]
[I] * Setting up and starting DHCP Server…Skipped[/I]
[I] * Setting up and starting TFTP and PXE Servers…Note: Forwarding request to ‘systemctl enable xinetd.service’.[/I]
[I]OK[/I]
[I] * Setting up and starting VSFTP Server…Note: Forwarding request to ‘systemctl enable vsftpd.service’.[/I]
[I]ln -s ‘/usr/lib/systemd/system/vsftpd.service’ ‘/etc/systemd/system/multi-user.target.wants/vsftpd.service’[/I]
[I]OK[/I]
[I] * Setting up sudo settings…OK[/I]
[I] * Setting up FOG Snapins…OK[/I]
[I] * Setting up and building UDPCast…OK[/I]
[I] * Installing init scripts…OK[/I]
[I] * Setting up FOG Services…OK[/I]
[I] * Starting FOG Multicast Management Server…OK[/I]
[I] * Starting FOG Image Replicator Server…OK[/I]
[I] * Starting FOG Task Scheduler Server…OK[/I]
[I] * Setting up FOG Utils…OK[/I][I] Would you like to notify the FOG group about this installation?[/I]
[I] * This information is only used to help the FOG group determine[/I]
[I] if FOG is being used. This information helps to let us know[/I]
[I] if we should keep improving this product.[/I][I] Send notification? (Y/N)[/I]
Thanks
-
fyi you can always post your install log. This log is located at /var/log/foginstall.log
It may give more insight than your quick copy paste.
-
If you got an error, how did everything install “just fine”?
I realize it didn’t fall out of the installer, but are you also aware we’ve stopped official support for Fedora specifically because we can’t keep up with all of the change’s?
-
I just checked SElinux, Although I’m setting SELINUX=disable in /etc/selinux/config, when I run [I]$ /usr/sbin/sestatus[/I] it says that is enable, any toughs?
[SIZE=6]From /etc/selinux/config folder:[/SIZE]
[I]# This file controls the state of SELinux on the system.[/I]
[I]# SELINUXTYPE= can take one of these two values:[/I]
[I]# targeted - Targeted processes are protected,[/I]
[I]# minimum - Modification of targeted policy. Only selected processes are protected. [/I]
[I]# mls - Multi Level Security protection.[/I]
[I]SELINUXTYPE=targeted[/I][SIZE=6][B]From terminal:[/B][/SIZE]
[root@10-21-0-110-ccca-internal Admin]# /usr/sbin/sestatus
SELinux status: enabled
SELinuxfs mount: /sys/fs/selinux
SELinux root directory: /etc/selinux
Loaded policy name: targeted
Current mode: enforcing
Mode from config file: error (Success)
Policy MLS status: enabled
Policy deny_unknown status: allowed
Max kernel policy version: 28
[root@10-21-0-110-ccca-internal Admin]# -
[code]/etc/selinux/config[/code]
Disable the line in there.
-
It is disabled but I still getting an enable status
This file controls the state of SELinux on the system.
SELINUX= can take one of these three values:
enforcing - SELinux security policy is enforced.
permissive - SELinux prints warnings instead of enforcing.
disabled - No SELinux policy is loaded.
SELINUX=disable
SELINUXTYPE= can take one of these two values:
targeted - Targeted processes are protected,
minimum - Modification of targeted policy. Only selected processes are protected.
mls - Multi Level Security protection.
SELINUXTYPE=targeted
-
Did you reboot?
-
[quote=“Tom Elliott, post: 34551, member: 7271”]Did you reboot?[/quote]
Yes
-
Ok, so I figured out why I was not able to disable selinux, I was missing a D (disable[B]d[/B]). Now is disabled but I’m still unable to reach the website.
Thasnks -
[quote=“Kronkras, post: 34554, member: 25243”]Ok, so I figured out why I was not able to disable selinux, I was missing a D (disable[B]d[/B]). Now is disabled but I’m still unable to reach the website.
Thasnks[/quote]Firewall issue. systemctl stop firewalld.service && systemctl disable firewalld.service
That should do it.
-
[quote=“madskillz23, post: 34557, member: 8206”]Firewall issue. systemctl stop firewalld.service && systemctl disable firewalld.service
That should do it.[/quote]
That did the trick.
I’ll still to test the system, register, upload an image, and deploy unicasts and multicast. I’ll update with the results.
Thanks guys!
-
[url]http://fogproject.org/wiki/index.php/Tftp_timeout[/url]…
Added Fedora 20 section and added the suggested line of “systemctl stop firewalld.service && systemctl disable firewalld.service”
-
[quote=“Kronkras, post: 34559, member: 25243”]That did the trick.
I’ll still to test the system, register, upload an image, and deploy unicasts and multicast. I’ll update with the results.
Thanks guys![/quote]
I’m on CentOS 7 (similar architecture to Fedora 20) and haven’t been able to get image upload working properly yet. Best of luck.
-
[quote=“madskillz23, post: 34563, member: 8206”]I’m on CentOS 7 (similar architecture to Fedora 20) and haven’t been able to get image upload working properly yet. Best of luck.[/quote]
Oh well, as you predicted, is not working.
- Mounting File System …mount: mounting 10.##.#.###:/images/dev/ on /images failed: Operation not supported
Any toughs?
-
[quote=“Tom Elliott, post: 34544, member: 7271”]If you got an error, how did everything install “just fine”?
I realize it didn’t fall out of the installer, but are you also aware we’ve stopped official support for Fedora specifically because we can’t keep up with all of the change’s?[/quote]
What OS would you suggest?
-
Ubuntu 10.04, 12.04, 13.10
CentOS 6.4,6.5 (assumed RHEL of same versions)
Earlier than Fedora 19
Debian 7.4, 7.5 -
I have (technically had since I’ve now upgraded) FOG up and running on Fedora 20 without any issues. Took some customizing, but figured it out. I posted a help guide on this thread:
[url]http://fogproject.org/forum/threads/using-0-32-with-fedora-20.10141/[/url]
Hopefully it can help you out.
-
[quote=“a1adam12, post: 35043, member: 22878”]I have (technically had since I’ve now upgraded) FOG up and running on Fedora 20 without any issues. Took some customizing, but figured it out. I posted a help guide on this thread:
[url]http://fogproject.org/forum/threads/using-0-32-with-fedora-20.10141/[/url]
Hopefully it can help you out.[/quote]
Hello a1adam12,
Thanks for your replied, I was able to pass the error message stated before and able to almost upload an image. The only problem is that when it finish to upload the image FOGFTP failed to connect. I verified TFTP and node have the same username and password as well as the IP.
Thank you
-
[quote=“Kronkras, post: 35064, member: 25243”]Hello a1adam12,
Thanks for your replied, I was able to pass the error message stated before and able to almost upload an image. The only problem is that when it finish to upload the image FOGFTP failed to connect. I verified TFTP and node have the same username and password as well as the IP.
Thank you[/quote]
What version of vsftpd do you have? If it’s > 3.1 (i think that’s it) then try adding:
[code]seccomp_sandbox=NO[/code] To the /etc/vsftpd.conf file and restart with:[code]service vsftpd restart[/code]
